Product Overview NCV890130: Automotive Switching Regulator, 1.2 A, 2 MHz, 45 V Load Dump For complete documentation, see the data sheet Product Description The NCV890130 is a fixed-frequency, monolithic, Buck switching regulator intended for Automotive, battery-connected applications that must operate with up to a 32 V input supply. The regulator is suitable for systems with low noise and small form factor requirements often encountered in automotive driver information systems. The NCV890130 is capable of converting the typical 4.5 V to 18 V automotive input voltage range to outputs as low as 3.3 V at a constant switching frequency above the sensitive AM band, eliminating the need for costly filters and EMI countermeasures. The NCV890130 also provides several protection features expected in Automotive power supply systems such as current limit, short circuit protection, and thermal shutdown. In addition, the high switching frequency produces low output voltage ripple even when using small inductor values and an all-ceramic output filter capacitor - forming a space-efficient switching regulator solution. Features • • • • • • • • • • Benefits 2 MHz Free-running Switching Frequency Internal N-Channel Power Switch Low VIN Operation Down to 4.5 V High VIN Operation to 32 V Withstands Load Dump to 45 V Logic level Enable Input Can be Directly Tied to Battery 1.4 A (min) Cycle-by-Cycle Peak Current Limit Short-Circuit Protection enhanced by Frequency Foldback ±1.75% Output Voltage Tolerance Output Voltage Adjustable Down to 0.8 V For more features, see the data sheet • • • • • • • • • • Applications • • • • Enables to use small size, low cost inductor and EMC filter Fewer external components Maintains operation during battery transients Maintains operation during battery transients Protects the load from load dump Flexible enable Protects against over current faults Protects against short circuits on the output Highly accurate regulation. Suitable for a wide range of applications End Products Audio Infotainment Safety - Vision Systems Instrumentation • Automotive Part Electrical Specifications Product Compliance Status Topology Control Mode VCC Min (V) VCC Max (V) VO Typ (V) IO Typ (A) NCV890130MWTXG AEC Qualified Active StepDown Current Mode 4.5 45 Adjustable Active StepDown Current Mode 4.5 45 Adjustable Efficiency (%) fSW Typ (kHz) Package Type 1.2 2200 DFN-8 1.2 2200 SOIC-8 EP PPAP Capable Pb-free NCV890130PDR2G AEC Qualified PPAP Capable Pb-free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016