Smart Low Side Power Switch HITFET BTS 133 Features Product Summary • Logic Level Input Drain source voltage VDS 60 V • Input Protection (ESD) On-state resistance RDS(on) 50 mΩ •=Thermal shutdown with latch Current limit I D(lim) 21 A • Green product (RoHS compliant) Nominal load current I D(ISO) 7 A • Short circuit and Overload protection Clamping energy EAS 2000 mJ • Overvoltage protection • Current limitation • Status feedback with external input resistor • Analog driving possible • AEC qualified • Green product (RoHS compliant) Application • All kinds of resistive, inductive and capacitive loads in switching or linear applications • µC compatible power switch for 12 V and 24 V DC applications • Replaces electromechanical relays and discrete circuits General Description N channel vertical power FET in Smart SIPMOS chip on chip technology. Providing embedded protection functions. V bb + LOAD M D rain 2 dv /d t lim ita tio n 1 IN ESD O v erloa d pro te ctio n C u rre n t O ve rvoltag e p rotection lim ita tio n O ve rte m pe rature p ro te ctio n Sh ho rt circ c ircu it S ort uit pprotection ro te ctio n S o u rce 3 H IT F E T Datasheet 1 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Maximum Ratings at Tj = 25 °C unless otherwise specified Parameter Symbol Drain source voltage VDS 60 Drain source voltage for short circuit protection Continuous input current 1) VDS(SC) 32 Value Unit V IIN mA -0.2V ≤ VIN ≤ 10V no limit VIN < -0.2V or VIN > 10V | IIN | ≤ 2 Operating temperature Tj - 40 ... +150 Storage temperature Tstg - 55 ... +150 Power dissipation Ptot 90 W EAS 2000 mJ 3000 V °C TC = 25 °C Unclamped single pulse inductive energy ID(ISO) = 7 A Electrostatic discharge voltage (Human Body Model) VESD according to MIL STD 883D, method 3015.7 and EOS/ESD assn. standard S5.1 - 1993 Load dump protection VLoadDump2) = VA + VS VLD VIN=low or high; VA =13.5 V td = 400 ms, RI = 2 Ω, ID =0,5*7A td = 400 ms, RI = 2 Ω, ID = 7A 90 74 Thermal resistance junction - case: R thJC 1.4 junction - ambient: R thJA 75 SMD version, device on PCB: 3) R thJA 45 K/W 1In case of thermal shutdown a minimum sensor holding current of 500 µA has to be guaranteed (see also page 3). 2V Loaddump is setup without the DUT connected to the generator per ISO 7637-1 and DIN 40839 3 Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm 2 (one layer, 70µm thick) copper area for Drain connection. PCB mounted vertical without blown air. Datasheet 2 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Electrical Characteristics Parameter Symbol at Tj=25°C, unless otherwise specified Values Unit min. typ. max. 60 - 73 V - - 10 µA 1.3 1.7 2.2 V µA Characteristics Drain source clamp voltage VDS(AZ) Tj = - 40 ...+ 150°C, ID = 10 mA Off state drain current IDSS VDS = 32 V, Tj = -40...+150 °C, VIN = 0 V Input threshold voltage VIN(th) ID = 1,4 mA Input current - normal operation, ID<ID(lim): VIN = 10 V IIN(1) - 30 55 Input current - current limitation mode, ID =ID(lim): VIN = 10 V IIN(2) 60 150 350 Input current - after thermal shutdown, ID=0 A: VIN = 10 V IIN(3) 1000 2500 4000 Input holding current after thermal shutdown 1) IIN(H) Tj = 25 °C 500 - - Tj = 150 °C 300 - - R DS(on) On-state resistance VIN = 5 V, ID = 7 A, Tj = 25 °C VIN = 5 V, ID = 7 A, Tj = 150 °C mΩ - 50 60 - 90 120 VIN = 10 V, I D = 7 A, T j = 25 °C - 40 50 VIN = 10 V, I D = 7 A, T j = 150 °C - 75 100 7 - - R DS(on) On-state resistance ID(ISO) Nominal load current (ISO 10483) A VIN = 10 V, VDS = 0.5 V, TC = 85 °C Datasheet 3 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Electrical Characteristics Parameter Symbol at T j=25°C, unless otherwise specified Values Unit min. typ. max. - 65 - 21 28 40 ton -- 40 100 toff -- 70 170 -dVDS/dton -- 1 3 dVDS/dtoff -- 1 3 150 165 - Characteristics ID(SCp) Initial peak short circuit current limit A VIN = 10 V, VDS = 12 V ID(lim) Current limit 1) VIN = 10 V, VDS = 12 V, tm = 350 µs, Tj = -40...+150 °C Dynamic Characteristics VIN to 90% ID : RL = 2,2 Ω, VIN = 0 to 10 V, Vbb = 12 V Turn-off time VIN to 10% ID : Turn-on time µs RL = 2,2 Ω, VIN = 10 to 0 V, Vbb = 12 V Slew rate on 70 to 50% Vbb : V/µs RL = 2,2 Ω, VIN = 0 to 10 V, Vbb = 12 V Slew rate off 50 to 70% Vbb: RL = 2,2 Ω, VIN = 10 to 0 V, Vbb = 12 V Protection Functions 2) Thermal overload trip temperature Tjt Unclamped single pulse inductive energy EAS °C mJ ID = 7 A, Tj = 25 °C, Vbb = 32 V 2000 - - ID = 7 A, Tj = 150 °C, Vbb = 32 V 450 - - - 1.08 - Inverse Diode VSD Inverse diode forward voltage V IF = 5*7A, tm = 300 µS, VIN = 0 V 1Device switched on into existing short circuit (see diagram Determination of I D(lim)). If the device is in on condition and a short circuit occurs, these values might be exceeded for max. 50 µs. 2Integrated protection functions are designed to prevent IC destruction under fault conditions described in the data sheet. Fault conditions are considered as "outside" normal operating range. Protection functions are not designed for continuous repetitive operation. Datasheet 4 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Block Diagramm Terms Inductive and overvoltage output clamp RL V Z D 2 I IN 1 D IN ID VDS Vbb S HITFET S 3 HITFET VIN Short circuit behaviour Input circuit (ESD protection) V IN I D(SCp) IN I D(Lim) ID ESD-ZD I Source t0 ESD zener diodes are not designed for DC current > 2 mA @ VIN >10V. t0: tm t1 t2 Turn on into a short circuit tm: Measurementpoint for ID(lim) t1: Activation of the fast temperature sensor and regulation of the drain current to a level where the junction temperature remains constant. t2: Thermal shutdown caused by the second temperature sensor, achieved by an integrating measurement. Datasheet 5 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Maximum allowable power dissipation On-state resistance Ptot = f(Tc ) RON = f(Tj ); ID=7A; VIN =10V BTS 133 100 100 mΩ W 80 RDS(on) 80 Ptot 70 60 70 60 max. 50 50 40 40 30 30 20 20 10 10 0 0 20 40 60 80 100 120 °C 0 -50 160 typ. -25 0 25 50 75 100 °C 150 Tj 150 On-state resistance Typ. input threshold voltage R ON = f(Tj ); ID= 7A; VIN=5V VIN(th) = f(Tj); ID =1,4mA; VDS =12V 2.0 120 mΩ V 100 VIN(th) RDS(on) 1.6 90 80 70 1.4 1.2 max. 60 1.0 50 typ. 0.8 40 0.6 30 0.4 20 0.2 10 0 -50 -25 0 25 50 75 100 °C 0.0 -50 150 Tj Datasheet -25 0 25 50 75 100 °C 150 Tj 6 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Typ. transfer characteristics Typ. output characteristic ID = f(VIN); VDS =12V; Tj =25°C ID = f(VDS); Tj =25°C Parameter: V IN 25 24 10V 6V 5V A A 4V ID ID 16 15 12 10 8 Vin=3V 5 4 0 0 1 2 3 4 5 V 6 0 0 8 VIN 1 2 3 V 5 VDS Transient thermal impedance Z thJC = f (t p) parameter : D = t p/T 10 1 K/W 10 0 ZthJC D=0.5 0.2 10 0.1 -1 0.05 0.02 0.01 10 -2 10 -3 0.005 0 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 s 10 2 tP Datasheet 7 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Application examples: Status signal of thermal shutdown by monitoring input current R St IN µC V IN D HITFET V bb S ∆V V IN thermal shutdown ∆V = RST *IIN(3) Datasheet 8 Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Package Outlines 1 Package Outlines 4.4 10 ±0.2 B 2.4 9.25 ±0.2 A 8.5 1) 0.05 1.3 ±0.3 4.7 ±0.5 0.1 0...0.15 1.05 2.7 ±0.3 7.55 1) 1 ±0.3 (15) 0...0.3 1.27 ±0.1 0.5 ±0.1 8˚ MAX. 0.75 ±0.1 2.54 5.08 0.1 B 0.25 M A B 1) Typical Metal surface min. X = 7.25, Y = 6.9 All metal surfaces tin plated, except area of cut. PG-TO220-3-5-PO V03 Figure 1 PG-TO220-3-5 (Plastic Dual Small Outline Package) (RoHS-Compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pbfree finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). Please specify the package needed (e.g. green package) when placing an order You can find all of our packages, sorts of packing and others in our Infineon Internet Page “Products”: http://www.infineon.com/products. Datasheet 9 Dimensions in mm Rev. 1.3, 2008-12-10 Smart Low Side Power Switch HITFET BTS 133 Revision History 2 Revision History Version Rev. 1.3 Date Changes 2008-12-10 released automotive green and robust version Package drawing updated Rev. 1.2 2008-08-11 Package information updated, removed through hole versions Rev. 1.1 2008-02-22 Package parameter (humidity and climatic) removed in Maximum ratings AEC icon and RoHS icon added Green product and AEC qualified added to the feature list added Protection footnote on Page 4 and changed front page general description Package information updated to green Green explanation added Rev. 1.0 2000-05-19 released production version Datasheet 10 Rev. 1.3, 2008-12-10 Edition 2008-12-10 Published by Infineon Technologies AG 81726 Munich, Germany © Infineon Technologies AG 2008. All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.