NXP LCD drivers PCA8537 and PCF8537 for 352 segments

853
7
PC
F
PC
A8
537
NXP LCD drivers
PCA8537 and PCF8537
for 352 segments
Low-power, single-chip LCD controller/
drivers for automotive and industrial
These fully featured LCD drivers are specifically designed for high-contrast vertical alignment (VA)
LCDs with multiplex rates up to 1:8.
Key features
`` Up to 352 elements for driving up to
- 44 seven-segment numeric characters
- 22 fourteen-segment alphanumeric characters
`` AEC-Q100 compliance (PCA8537)
`` Selectable backplane driver configuration: static, 2, 4, 6, or 8
backplane multiplexing
`` Software-programmable internal charge pump for on-chip
LCD voltage generation with internal capacitors
`` 400 kHz I2C (AH versions) or 5 MHz SPI (BH versions)
interface
`` Programmable temperature compensation of VLCD in four
regions
`` Selectable display bias configurations
`` Wide range of digital power supply: 1.8 to 5.5 V
`` Wide LCD supply range: from 2.5 V for low-threshold LCDs
up to 9.0 V for high-threshold nematic and VA LCDs
`` Display memory bank switching in static, duplex, and
quadruplex drive modes
`` 352-bit RAM for display storage
`` Programmable frame frequency from 60 to 300 Hz in steps
of 10 Hz (factory calibrated)
`` Integrated temperature sensor with temperature readout
`` On-chip calibration of internal oscillator frequency and VLCD
`` Manufactured in silicon gate CMOS process
Applications
`` Industrial
- White goods
- Handheld electronics
- Battery operated equipment
- Machine control systems
- Measuring equipment
- Information boards
- Panels
- Consumer
- Industrial
- Medical and health care
- General purpose display modules
`` Automotive
- Instrument cluster
- Car radio
- Climate control units
The NXP PCF8537 and PCA8537 generate the drive signals
for any static or multiplexed LCD with up to eight backplanes,
46 segments, and 352 elements. The PCA8537 is AEC-Q100
compliant for automotive applications.
Both devices feature an internal charge pump with internal
capacitors for on-chip generation of the LCD driving voltage.
To ensure an optimal and stable contrast over the full
temperature range, they offer programmable temperature
compensation of the LCD supply voltage. A two-line I2C bus
(in AH versions) or a three-line SPI bus (in BH versions) make
the drivers easy to connect to a standard microcontroller. Ordering information
Type number
Interface type
Application
PCF8537AH
I 2C
Industrial
PCF8537BH
SPI
Industrial
PCA8537AH
I 2C
Automotive
PCA8537BH
SPI
Automotive
Package
Name
Description
12NC
Version
9352 978 97518
TQFP64
Plastic thin quad flat `
package; 64 leads;
body 10 x 10 x 1.0 mm
SOT357-1
9352 978 98518
9352 978 95518
9352 978 96518
The 352 PCx8537 segments (alphanumeric, numeric, and icons)
20 x 14-segment displays
= 280 segments
8 x 7-segment displays + dots
= 64 segments
+
-
Minimum order
quantity
ABS
8 icons
352 segments
www.nxp.com
© 2012 NXP Semiconductors N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The
Date of release: June 2012
information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and
Document order number: 9397 750 17304
may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof
Printed in the Netherlands
does not convey nor imply any license under patent- or other industrial or intellectual property rights.
1500