Previous Datasheet Index Next Data Sheet Bulletin I2080/A SD200N/R SERIES Stud Version STANDARD RECOVERY DIODES Features 200A Wide current range High voltage ratings up to 2400V High surge current capabilities Stud cathode and stud anode version Standard JEDEC types Typical Applications Converters Power supplies Machine tool controls High power drives Medium traction applications Major Ratings and Characteristics Parameters SD200N/R Units 200 A 110 °C 314 A @ 50Hz 4700 A @ 60Hz 4920 A @ 50Hz 110 KA2s @ 60Hz 101 KA2s V RRM range 400 to 2400 V TJ - 40 to 180 °C IF(AV) @ TC IF(RMS) IFSM I 2t To Order case style DO-205AC (DO-30) Previous Datasheet Index Next Data Sheet SD200N/R Series ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code SD200N/R VRRM , maximum repetitive peak reverse voltage V VRSM , maximum nonrepetitive peak rev. voltage V 04 400 500 08 800 900 12 1200 1300 16 1600 1700 20 2000 2100 24 2400 2500 IRRM max. @ TJ = TJ max. mA 15 Forward Conduction Parameter I F(AV) I F(AV) SD200N/R Units Max. average forward current 200 A @ Case temperature 110 °C Max. average forward current 220 A @ Case temperature 100 °C 314 A I F(RMS) Max. RMS forward current I FSM Max. peak, one-cycle forward, 4700 non-repetitive surge current 4920 Maximum I2t for fusing reapplied t = 10ms 100% VRRM 4140 t = 8.3ms reapplied Sinusoidal half wave, 110 t = 10ms No voltage Initial TJ = TJ max. t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied A KA2s 71 I √t Maximum I √t for fusing V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage r f1 1100 KA √s 2 t = 0.1 to 10ms, no voltage reapplied (16.7% x π x I F(AV) < I < π x IF(AV) ), TJ = TJ max. 0.90 V 1.00 (I > π x IF(AV) ),TJ = TJ max. 0.79 (16.7% x π x IF(AV) < I < π x IF(AV) ), TJ = TJ max. Low level value of forward slope resistance DC @ 95°C case temperature t = 8.3ms 78 2 180° conduction, half sine wave No voltage 101 2 180° conduction, half sine wave t = 10ms 3950 I2t Conditions mΩ r f2 High level value of forward slope resistance V FM Max. forward voltage drop (I > π x IF(AV)),TJ = TJ max. 0.64 1.40 V To Order Ipk= 630A, TJ = TJ max, tp = 10ms sinusoidal wave Previous Datasheet Index Next Data Sheet SD200N/R Series Thermal and Mechanical Specifications Parameter SD200N/R TJ Max. junction operating temperature range -40 to 180 Tstg Max. storage temperature range -55 to 200 RthJC Max. thermal resistance, junction to case 0.23 RthCS Max. thermal resistance, case to heatsink 0.08 T Max. allowed mounting torque ±10% wt Approximate weight Case style Units Conditions °C DC operation K/W 14 Nm 120 g Mounting surface, smooth, flat and greased Not lubricated threads DO-205AC(DO-30) See Outline Table ∆RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Units 180° 0.041 0.030 120° 0.049 0.051 90° 0.063 0.068 60° 0.093 0.096 30° 0.156 0.157 Conditions TJ = TJ max. K/W Ordering Information Table Device Code SD 20 0 N 24 P B C 1 2 3 4 5 6 7 8 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - N = Stud Normal Polarity (Cathode to Stud) R = Stud Reverse Polarity (Anode to Stud) 5 - Voltage code: Code x 100 = VRRM (See Voltage Ratings table) 6 - P = Stud base DO-205AC (DO-30) 1/2" 20UNF-2A M = Stud base DO-205AC (DO-30) M12 X 1.75 7 - B = Flag top terminal (for Cathode/ Anode Leads) S = Isolated lead with silicone sleeve (Red = Reverse Polarity; Blue = Normal Polarity) None = Non isolated lead 8 - C = Ceramic Housing (over 1600V) V = Glass-metal seal (only up to 1600V) To Order Previous Datasheet Index Next Data Sheet SD200N/R Series Outline Table CERAMIC HOUSING 16.5 (0.65) 2.6 (0.10) MAX 35 (1.38) MAX. 6.5 (0.26) MIN. MAX. C.S. 16mm 2 170 (6.69) (0.015 s.i.) SW 27 12.5 (0.49) MAX. Conforms to JEDEC DO-205AC (DO-30) All dimensions in millimeters (inches) 1/2"-20UNF-2A* * FOR METRIC DEVICE: M12 X 1.75 GLASS-METAL SEAL 16.5 (0.65) 2.6 (0.10) MAX 35 (1.38) MAX. 6.5 (0.26) MIN. MAX. DIA. 8.5 (0.33) NOM. 170 (6.69) 2 C.S. 16mm (0.015 s.i.) SW 27 12.5 (0.49) MAX. 24 (0.94) MAX. DIA. 23.5 (0.93) MAX. 21 (0.82) MAX. 55 (2.16) MIN. 157 (6.18) 29 (1.14) MAX. DIA. 22.5 (0.88) MAX. 21 (0.82) MAX. 55 (2.16) MIN. 157 (6.18) DIA. 8.5 (0.33) NOM. 1/2"-20UNF-2A* * FOR METRIC DEVICE: M12 X 1.75 To Order Previous Datasheet Index Next Data Sheet SD200N/R Series Outline Table CERAMIC HOUSING 16.5 (0.65) 5.6 (0.22) 40.5 (1.59) MAX. MAX. 12.5 (0.49) 29 (1.14) MAX. DIA. 22.5 (0.88) MAX. 21 (0.82) MAX. 1/2"-20UNF-2A* 2.4 (0.09) *FOR METRIC DEVICE. M12 X 1.75 DO-205AC (DO-30) Flag All dimensions in millimeters (inches) GLASS-METAL SEAL 16.5 (0.65) 5.6 (0.22) 9.5 (0.37) DIA. 5.54 (0.22) 36.5 (1.44) 12.5 (0.49) MAX. 24 (0.94) MAX. DIA. 23.5 (0.93) MAX. 21 (0.82) MAX. 41 (1.61) MAX. 1/2"-20UNF-2A* To Order 2.4 (0.09) *FOR METRIC DEVICE. M12 X 1.75 27 (1.06) 27 (1.06) 45 (1.77) 9.5 (0.37) DIA. 5.54 (0.22) Previous Datasheet Index Next Data Sheet Maximum Allowable Case Temperature (°C) 180 SD200N/R Series R (DC) = 0.23 K/ W 170 thJC 160 150 Conduction Angle 140 130 120 110 60° 90° 120° 180° 30° 100 0 40 80 120 160 200 240 180 SD200N/ RSeries RthJC (DC) = 0.23 K/ W 170 160 150 140 Conduction Period 130 120 110 90° 60° 100 30° 0 180° 50 100 150 200 250 R 180° 120° 90° 60° 30° = 8 0.0 W K/ 0. 4 A th S 0. 3K /W /W 2K 0.1 /W 2K 0. K/ W a elt -D 200 0. 8 150 R 0.6 K/ W RMSLimit K/ W Conduction Angle 100 SD200N/ R Series TJ = 180°C 50 1.4 K/ W 1.8 K/ W 0 0 50 100 150 200 20 40 250 Average Forward Current (A) 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Fig. 3 - Forward Power Loss Characteristics 400 Rt W K/ ta el -D RMS Limit Conduction Period SD200N/ R Series TJ = 180°C 100 50 R 0. 3K /W 0.4 K/ W 200 150 K/ W 08 0. 0. 2 = 250 W K/ 12 0. 300 A hS DC 180° 120° 90° 60° 30° 350 0. 6 K/ W 0.8 K/ W 1.4 K / W 1.8 K/ W 0 0 50 100 150 200 300 350 Fig. 2 - Current Ratings Characteristics 300 250 DC Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 120° 90 Average Forward Current (A) Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) SD200N/R Series 250 300 Average Forward Current (A) 350 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics To Order Previous Datasheet Index Next Data Sheet Peak Half Sine Wave Forward Current (A) 4500 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. 4000 Initial TJ = 180°C @60 Hz 0.0083 s @50 Hz 0.0100 s 3500 3000 2500 2000 1500 SD200N/R Series 1000 1 10 100 5000 4500 4000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ= 180°C No Voltage Reapp lied Rated VRRMReapplied 3500 3000 2500 2000 SD200N/ R Series 1500 1000 0.01 Number Of Equal Amplitude Half Cycle Current Pulses (N) 0.1 Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 10000 SD200N/ R Series 1000 TJ = 25°C TJ = 180°C 100 0.5 1 1.5 2 2.5 3 3.5 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 1 Steady State Value: R thJC = 0.23 K/ W (DC Operation) 0.1 SD200N/ R Series 0.01 0.001 0.01 1 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Transient Thermal Impedanc e Z thJC (K/W) Peak Half Sine Wave Forward Current (A) SD200N/R Series 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance Z thJC Characteristic To Order