INTEGRATED CIRCUITS 74F157*, 74F157A, 74F158*, 74F158A Data selectors/multiplexers * Discontinued part. Please see the Discontinued Product List in Section 1, page 21. Product specification IC15 Data Handbook 1996 Mar 12 Philips Semiconductors Product specification Data selectors/multiplexers 74F157A: 74F158A: 74F157A, 74F158A Quad 2-input data selector/multiplexer, non-inverting Quad 2-input data selector/multiplexer, inverting • Industrial temperature range (–10°C to +85°C) available for DESCRIPTION The 74F157A is a high speed Quad 2-Input Multiplexer which selects 4 bits of data from one of two sources under the control of a common Select input (S). The Enable input (E) is active when Low. When E is High, all of the outputs (Yn) are forced Low regardless of all other input conditions. 74F157A Moving data from two registers to a common output bus is a common use of the 74F157A. The state of the Select input determines the particular register from which the data comes. The device is the logic implementation of a 4-pole, 2-position switch where the position of the switch is determined by the logic levels supplied to the Select input. TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F157 4.6ns 15mA 74F157A 4.6ns 15mA 74F158 3.7ns 10mA 74F158A 3.7ns 10mA The 74F158A is similar, but has inverting outputs (Yn). ORDERING INFORMATION ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C INDUSTRIAL RANGE VCC = 5V ±10%, Tamb = –40°C to +85°C PKG. DWG. # 16-pin plastic DIP N74F157AN, N174F158AN I74F157AN SOT38-4 16-pin plastic SO N74F157AD, N74F158AD I74F157AD SOT109-1 INPUT AND OUTPUT LOADING AND FAN OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW Ina, Inb, Inc, Ind Data inputs 1.0/1.0 20µA/0.6mA S Select input 1.0/1.0 20µA/0.6mA E Enable input 1.0/1.0 20µA/0.6mA Ya–Yd Data outputs (74F157/74F157A) 50/33 1.0mA/20mA Ya–Yd Data outputs (74F158/74F158A) 50/33 1.0mA/20mA NOTE: One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state. PIN CONFIGURATIONS, 74F157A 74F158A S 1 16 VCC E I0a 2 15 E 14 I0d I1a 3 14 I0d S 1 16 VCC I0a 2 15 I1a 3 Ya 4 13 I1d Ya 4 13 I1d I0b 5 12 Yd I0b 5 12 Yd I1b 6 11 I0c I1b 6 11 I0c Yb 7 10 I1c Yb 7 10 I1c GND 8 9 Yc GND 8 9 Yc SF00216 SF00215 LOGIC SYMBOLS, 74F157A 2 3 5 I0a I1a I0b 74F158A 6 11 10 14 I1b I0c I1c I0d I1d 2 13 1 S 1 S 15 E 15 E VCC = Pin 16 GND = Pin 8 1996 Mar 12 Ya Yb Yc Yd 4 7 9 12 VCC = Pin 16 GND = Pin 8 SF00217 2 3 5 6 11 10 14 13 I0a I1a I0b I1b I0c I1c I0d I1d Ya Yb Yc Yd 4 7 9 12 SF00218 853-0346 16555 Philips Semiconductors Product specification Data selectors/multiplexers 74F157A, 74F158A IEEE/IEC SYMBOLS, 74F157A 1 15 2 G1 1 EN 15 MUX 1 3 74F158A G1 EN 2 4 1 5 MUX 1 3 4 1 5 7 7 6 6 11 11 9 10 9 10 14 14 12 12 13 13 SF00219 SF00220 LOGIC DIAGRAM, 74F157A I0a I1a 2 I0b 3 I1b 5 I0c 6 4 I1c 11 10 7 Ya 74F158A I0d I1d 14 9 Yb Yc 13 E S 15 I0a 1 I1a 2 12 I1b 5 I0c 6 4 Yd VCC = Pin 16 GND = Pin 8 I0b 3 I1c 11 10 7 Ya I0d I1d 14 9 Yb Yc 13 S 15 1 12 Yd VCC = Pin 16 GND = Pin 8 SF00225 E SF00226 FUNCTION TABLE, 74F157A 74F158A INPUTS OUTPUT INPUTS OUTPUT E S I0n I1n Yn E S I0n I1n Yn H X X X L H X X X H L H X L L L L L X H L H X H H L L H X L L L L X L L H X L H L L H X H L H X H L H = High voltage level L = Low voltage level X = Don’t care 1996 Mar 12 H = High voltage level L = Low voltage level X = Don’t care 3 Philips Semiconductors Product specification Data selectors/multiplexers 74F157A, 74F158A ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL RATING UNIT VCC Supply voltage PARAMETER –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to VCC V IOUT Current applied to output in Low output state 40 mA Tambb Operating temperature O erating free-air tem erature range Commercial Range 0 to +70 Industrial Range 74F157A only –40 to +85 °C Tstg Storage temperature range °C –65 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL LIMITS PARAMETER UNIT MIN NOM MAX 5.0 5.5 VCC Supply voltage 4.5 V VIH High-level input voltage 2.0 VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –1 mA IOL Low-level output current 20 mA Tamb Operating free air temperature range V Commercial Range 0 70 Industrial Range 74F157A only –40 85 °C DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL TEST CONDITIONS1 PARAMETER LIMITS MIN TYP2 MAX UNIT VCC = MIN, VIL = MAX ±10%VCC 2.5 VIH = MIN, IOH = MAX ±5%VCC 2.7 VCC = MIN, VIL = MAX ±10%VCC 0.30 0.50 VIH = MIN, IOL = MAX ±5%VCC 0.30 0.50 –0.73 –1.2 V 100 µA VOH High-level out output ut voltage VOL output Low-level out ut voltage VIK Input clamp voltage VCC = MIN, II = IIK II Input current at maximum input voltage VCC = MAX, VI = 7.0V IIH High-level input current VCC = MAX, VI = 2.7V 20 µA IIL Low-level input current VCC = MAX, VI = 0.5V –0.6 mA IOS Short-circuit output current3 ICC Supply Su ly current (total)4 VCC = MAX 74F157A 74F158A VCC = MAX V 3.4 –60 V –150 mA 15.0 23.0 mA 14.0 19.0 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. 4. ICC is measured with 4.5V applied to all inputs and all outputs open. 1996 Mar 12 4 Philips Semiconductors Product specification Data selectors/multiplexers 74F157A, 74F158A AC ELECTRICAL CHARACTERISTICS FOR 74F157A AND 74F158A LIMITS SYMBOL VCC = +5.0V ± 10% Tamb = 0°C to +70°C CL = 50pF RL = 500Ω VCC = +5.0V Tamb = +25°C CL = 50pF RL = 500Ω TEST CONDITION PARAMETER VCC = +5.0V ± 10% Tamb = –40°C to +85°C CL = 50pF RL = 500Ω UNIT MIN TYP MAX MIN MAX MIN MAX Waveform 1 3.5 2.5 4.5 3.5 6.5 5.0 3.0 1.5 7.0 6.0 3.0 1.5 7.5 6.5 ns Waveform 3 6.0 4.0 7.5 5.0 9.0 6.5 5.5 4.0 10.5 7.0 5.5 4.0 11.0 7.5 ns tPLH tPHL Propagation delay I0n, I1n to Yn tPLH tPHL Propagation delay E to Yn tPLH tPHL Propagation delay S to Yn Waveform 1 5.5 4.5 7.5 6.0 10.0 7.5 5.0 4.0 11.0 8.5 5.0 4.0 11.5 9.0 ns tPLH tPHL Propagation delay I0n, I1n to Yn Waveform 2 3.0 1.5 4.0 2.5 6.0 4.0 2.5 1.0 7.0 4.5 — — ns tPLH tPHL Propagation delay E to Yn Waveform 4 4.5 5.0 5.5 6.0 7.0 7.5 4.0 5.0 7.5 8.0 — — ns tPLH tPHL Propagation delay S to Yn Waveform 2 4.5 4.0 6.5 5.5 8.5 7.5 4.0 3.5 9.5 8.0 — — ns 74F157A 74F158A AC WAVEFORMS For all waveforms, VM = 1.5V I0n, I1n, S I0n, I1n, S VM tPHL tPLH VM Yn VM VM VM tPLH VM tPHL VM Yn VM SF00221 Waveform 1. SF00222 Propagation Delay for Data and Select to Output E VM Propagation Delay for Data and Select to Output E VM tPLH Yn Waveform 2. tPHL VM 1996 Mar 12 VM tPHL VM Yn SF00223 Waveform 3. VM tPLH VM VM SF00224 Waveform 4. Propagation Delay for Enable to Output 5 Propagation Delay for Enable to Output Philips Semiconductors Product specification Data selectors/multiplexers 74F157A, 74F158A TEST CIRCUIT AND WAVEFORMS VCC VIN tw 90% NEGATIVE PULSE VM D.U.T. RT CL RL AMP (V) VM 10% VOUT PULSE GENERATOR 90% 10% tTHL (tf ) tTLH (tr ) tTLH (tr ) tTHL (tf ) 0V AMP (V) 90% 90% POSITIVE PULSE Test Circuit for Totem-Pole Outputs DEFINITIONS: RL = Load resistor; see AC ELECTRICAL CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC ELECTRICAL CHARACTERISTICS for value. RT = Termination resistance should be equal to ZOUT of pulse generators. VM VM 10% 10% tw 0V Input Pulse Definition INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns SF00006 1996 Mar 12 6 Philips Semiconductors Product specification 74F157*, 74F157A 74F158*, 74F158A Data selectors/multiplexers DIP16: plastic dual in-line package; 16 leads (300 mil) * Discontinued part. Please see the Discontinued Product List in Section 1, page 21. 1996 Mar 12 7 SOT38-4 Philips Semiconductors Product specification 74F157*, 74F157A 74F158*, 74F158A Data selectors/multiplexers SO16: plastic small outline package; 16 leads; body width 3.9 mm * Discontinued part. Please see the Discontinued Product List in Section 1, page 21. 1996 Mar 12 8 SOT109-1 Philips Semiconductors Product specification 74F157*, 74F157A 74F158*, 74F158A Data selectors/multiplexers NOTES * Discontinued part. Please see the Discontinued Product List in Section 1, page 21. 1996 Mar 12 9 Philips Semiconductors Product specification 74F157*, 74F157A, 74F158*, 74F158A Data selectors/multiplexers Data sheet status Data sheet status Product status Definition [1] Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 print code Document order number: * Discontinued part. Please see the Discontinued Product List in Section 1, page 21. yyyy mmm dd 10 Date of release: 10-98 9397-750-05083