DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D252 BGY888 CATV amplifier module Product specification Supersedes data of 1997 Apr 10 1999 Mar 30 Philips Semiconductors Product specification CATV amplifier module BGY888 PINNING SOT115J FEATURES • Excellent linearity PIN • Extremely low noise DESCRIPTION 1 • High gain input 2, 3 • Excellent return loss properties. common 5 +VB 7, 8 APPLICATIONS common 9 output • Single module line extender in CATV systems operating over a frequency range of 40 to 860 MHz. handbook, halfpage 1 DESCRIPTION Hybrid high dynamic range amplifier module operating with a voltage supply of 24 V in a SOT115J package. The high gain module consists of two cascaded stages both in cascode configuration. 2 3 5 7 8 9 Side view MSA319 Fig.1 Simplified outline. QUICK REFERENCE DATA SYMBOL Gp Itot PARAMETER CONDITIONS power gain total current consumption (DC) MIN. MAX. UNIT f = 50 MHz 33.5 34.5 dB f = 860 MHz 34 − dB VB = 24 V − 340 mA LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL PARAMETER MIN. MAX. UNIT Vi RF input voltage − 55 dBmV Tmb operating mounting base temperature −20 +100 °C Tstg storage temperature −40 +100 °C 1999 Mar 30 2 Philips Semiconductors Product specification CATV amplifier module BGY888 CHARACTERISTICS Table 1 Bandwidth 40 to 860 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω SYMBOL Gp PARAMETER power gain CONDITIONS MIN. TYP. MAX. UNIT f = 50 MHz 33.5 34 34.5 dB f = 860 MHz 34 35 − dB SL slope cable equivalent f = 40 to 860 MHz 0.5 1.1 2.5 dB FL flatness of frequency response f = 40 to 860 MHz − ±0.2 ±0.5 dB S11 input return losses f = 40 to 80 MHz 20 25 − dB S22 output return losses f = 80 to 160 MHz 18.5 28 − dB f = 160 to 320 MHz 17 28 − dB f = 320 to 640 MHz 15.5 21 − dB f = 640 to 860 MHz 14 18.5 − dB f = 40 to 80 MHz 20 25.5 − dB f = 80 to 160 MHz 18.5 28.5 − dB f = 160 to 320 MHz 17 26.5 − dB f = 320 to 640 MHz 15.5 20.5 − dB f = 640 to 860 MHz 14 21 − dB S21 phase response f = 50 MHz 135 − 225 deg CTB composite triple beat 49 channels flat; Vo = 44 dBmV; measured at 859.25 MHz − −63.5 −60 dB Xmod cross modulation 49 channels flat; Vo = 44 dBmV; measured at 55.25 MHz − −63 −59 dB CSO composite second order distortion 49 channels flat; Vo = 44 dBmV; measured at 860.5 MHz − −64 −55 dB d2 second order distortion note 1 − −74 −65 dB Vo output voltage dim = −60 dB; note 2 58 60 − dBmV F noise figure f = 50 MHz − 4 4.5 dB f = 550 MHz − − 5 dB f = 600 MHz − − 5 dB f = 650 MHz − − 5.5 dB f = 750 MHz − − 6 dB f = 860 MHz − 5.5 7 dB note 3 − 325 340 mA Itot total current consumption (DC) Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 805.25 MHz; Vq = 44 dBmV; measured at fp + fq = 860.5 MHz. 2. Measured according to DIN45004B: fp = 851.25 MHz; Vp = Vo; fq = 858.25 MHz; Vq = Vo−6 dB; fr = 860.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 849.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1999 Mar 30 3 Philips Semiconductors Product specification CATV amplifier module Table 2 BGY888 Bandwidth 40 to 860 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω SYMBOL Gp PARAMETER power gain CONDITIONS MIN. TYP. MAX. UNIT f = 50 MHz 33.5 34 34.5 dB f = 860 MHz 34 35 − dB f = 40 to 860 MHz 0.5 1.1 2.5 dB SL slope cable equivalent FL flatness of frequency response f = 40 to 860 MHz − ±0.2 ±0.5 dB S11 input return losses f = 40 to 80 MHz 20 25 − dB f = 80 to 160 MHz 18.5 28 − dB f = 160 to 320 MHz 17 28 − dB f = 320 to 640 MHz 15.5 21 − dB f = 640 to 860 MHz 14 18.5 − dB f = 40 to 80 MHz 20 25.5 − dB S22 output return losses f = 80 to 160 MHz 18.5 28.5 − dB f = 160 to 320 MHz 17 26.5 − dB f = 320 to 640 MHz 15.5 20.5 − dB f = 640 to 860 MHz 14 21 − dB S21 phase response f = 50 MHz 135 − 225 deg CTB composite triple beat 129 channels flat; Vo = 44 dBmV; measured at 859.25 MHz − −47.5 −46 dB Xmod cross modulation 129 channels flat; Vo = 44 dBmV; measured at 55.25 MHz − −53.5 −50 dB CSO composite second order distortion 129 channels flat; Vo = 44 dBmV; measured at 860.5 MHz − −56 −48 dB d2 second order distortion note 1 − −74 −65 dB Vo output voltage dim = −60 dB; note 2 58 60 − dBmV F noise figure see Table 1 − − − dB Itot total current consumption (DC) note 3 − 325 340 mA Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 805.25 MHz; Vq = 44 dBmV; measured at fp + fq = 860.5 MHz. 2. Measured according to DIN45004B: fp = 851.25 MHz; Vp = Vo; fq = 858.25 MHz; Vq = Vo −6 dB; fr = 860.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 849.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1999 Mar 30 4 Philips Semiconductors Product specification CATV amplifier module Table 3 BGY888 Bandwidth 40 to 750 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω SYMBOL Gp PARAMETER power gain CONDITIONS MIN. TYP. MAX. UNIT f = 50 MHz 33.5 34 34.5 dB f = 750 MHz 34 − − dB f = 40 to 750 MHz 0.2 − 2.2 dB SL slope cable equivalent FL flatness of frequency response f = 40 to 750 MHz − − ±0.45 dB S11 input return losses f = 40 to 80 MHz 20 25 − dB f = 80 to 160 MHz 18.5 28 − dB f = 160 to 320 MHz 17 28 − dB f = 320 to 640 MHz 15.5 21 − dB f = 640 to 750 MHz 14 18.5 − dB f = 40 to 80 MHz 20 25.5 − dB S22 output return losses f = 80 to 160 MHz 18.5 28.5 − dB f = 160 to 320 MHz 17 26.5 − dB f = 320 to 640 MHz 15.5 20.5 − dB f = 640 to 750 MHz 14 21 − dB S21 phase response f = 50 MHz 135 − 225 deg CTB composite triple beat 110 channels flat; Vo = 44 dBmV; measured at 745.25 MHz − −52.5 −50 dB Xmod cross modulation 110 channels flat; Vo = 44 dBmV; measured at 55.25 MHz − −55.5 −51 dB CSO composite second order distortion 110 channels flat; Vo = 44 dBmV; measured at 746.5 MHz − −61.5 −53 dB d2 second order distortion note 1 − − −65 dB Vo output voltage dim = −60 dB; note 2 59 − − dBmV F noise figure see Table 1 − − − dB Itot total current consumption (DC) note 3 − 325 340 mA Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 691.25 MHz; Vq = 44 dBmV; measured at fp + fq = 746.5 MHz. 2. Measured according to DIN45004B: fp = 740.25 MHz; Vp = Vo; fq = 747.25 MHz; Vq = Vo−6 dB; fr = 749.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 738.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1999 Mar 30 5 Philips Semiconductors Product specification CATV amplifier module Table 4 BGY888 Bandwidth 40 to 600 MHz; VB = 24 V; Tcase = 30 °C; ZS = ZL = 75 Ω SYMBOL Gp PARAMETER power gain CONDITIONS MIN. TYP. MAX. UNIT f = 50 MHz 33.5 34 34.5 dB f = 600 MHz 34 − − dB f = 40 to 600 MHz 0 − 2 dB SL slope cable equivalent FL flatness of frequency response f = 40 to 600 MHz − − ±0.35 dB S11 input return losses f = 40 to 80 MHz 20 25 − dB f = 80 to 160 MHz 18.5 28 − dB f = 160 to 320 MHz 17 28 − dB f = 320 to 600 MHz 16 21 − dB f = 40 to 80 MHz 20 25.5 − dB f = 80 to 160 MHz 18.5 28.5 − dB f = 160 to 320 MHz 17 26.5 − dB f = 320 to 600 MHz 16 20.5 − dB S22 output return losses S21 phase response f = 50MHz 135 − 225 deg CTB composite triple beat 85 channels flat; Vo = 44 dBmV; measured at 595.25 MHz − −56.5 −55 dB Xmod cross modulation 85 channels flat; Vo = 44 dBmV; measured at 55.25 MHz − −58 −54 dB CSO composite second order distortion 85 channels flat; Vo = 44 dBmV; measured at 596.5 MHz − −69.5 −56 dB d2 second order distortion note 1 − − −68 dB Vo output voltage dim = −60 dB; note 2 61 − − dBmV F noise figure (DC) see Table 1 − − − dB Itot total current consumption note 3 − 325 340 mA Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 541.25 MHz; Vq = 44 dBmV; measured at fp + fq = 596.5 MHz. 2. Measured according to DIN45004B: fp = 590.25 MHz; Vp = Vo; fq = 597.25 MHz; Vq = Vo −6 dB; fr = 599.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 588.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1999 Mar 30 6 Philips Semiconductors Product specification CATV amplifier module BGY888 PACKAGE OUTLINE Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J D E Z p A2 1 2 3 5 7 8 9 A L F S W c e b w M e1 d U2 q2 Q B y M B q1 y M B y M B p U1 q 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c d D E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. p Q max. 8.8 4.15 3.85 2.4 REFERENCES IEC JEDEC EIAJ q1 q2 38.1 25.4 10.2 S U1 U2 max. 4.2 44.75 8 EUROPEAN PROJECTION W w 6-32 0.25 UNC y Z max. 0.1 3.8 ISSUE DATE 99-02-06 SOT115J 1999 Mar 30 q 7 Philips Semiconductors Product specification CATV amplifier module BGY888 DEFINITIONS Data Sheet Status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1999 Mar 30 8 Philips Semiconductors Product specification CATV amplifier module BGY888 NOTES 1999 Mar 30 9 Philips Semiconductors Product specification CATV amplifier module BGY888 NOTES 1999 Mar 30 10 Philips Semiconductors Product specification CATV amplifier module BGY888 NOTES 1999 Mar 30 11 Philips Semiconductors – a worldwide company Argentina: see South America Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. +61 2 9805 4455, Fax. +61 2 9805 4466 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstraße 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3, 20124 MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5077 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA, Tel. +48 22 612 2831, Fax. +48 22 612 2327 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000, Tel. +27 11 470 5911, Fax. +27 11 470 5494 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SÃO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260, Tel. +66 2 745 4090, Fax. +66 2 398 0793 Turkey: Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL, Tel. +90 212 279 2770, Fax. +90 212 282 6707 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 181 730 5000, Fax. +44 181 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 62 5344, Fax.+381 11 63 5777 For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Internet: http://www.semiconductors.philips.com © Philips Electronics N.V. 1999 SCA63 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 125008/00/04/pp12 Date of release: 1999 Mar 30 Document order number: 9397 750 05456