OPTOWAY TRM

Optoway
TRM-5001G
1
***********************************************************************************************************************************************************************
TRM-5001G / TRM-5001TG / TRM-5001AG / TRM-5001ATG
5V / 1310 nm / 622 Mbps RoHS Compliant Optical Multi-Mode Transceiver
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
l
l
l
l
l
l
l
l
The TRM-5001G series multi-mode transceivers are low
power, high performance module for bi-directional serial
optical data communications such as ATM 622 Mb/s, Fast
Ethernet and Fibre Channel. This module is designed for
multi-mode fiber and operates at a nominal wavelength of
1310 nm. The transmitter section uses a multiple quantum
well laser and is a class 1 laser compliant according to
International Safety Standard IEC 60825. The receiver
section uses an integrated InGaAs detector preamplifier (IDP)
mounted in an optical header and a limiting post-amplifier IC.
A PECL logic interface simplifies interface to external
circuitry.
Duplex SC Multimode Transceiver: TRM-5001G
Duplex ST Multimode Transceiver: TRM-5001TG
1310 nm Transmitter
0 to 1000 m Transmission
Industry Standard 1 x 9 Footprint
Single +5 V Power Supply
PECL Signal Detection Output
RoHS Compliant
0 to 70 oC Operating : TRM-5001G
-20 to 85 oC Operating : TRM-5001AG
Wave Solderable and Aqueous Washable
Class 1 Laser International Safety Standard IEC
60825 Compliant
LASER SAFETY
APPLICATIONS
l
l
l
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ATM 622 Mbps Links
SONET/SDH Equipment Interconnect
Fast Ethernet 100 Mb/s Links
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
Distance
(m)
Wavelength
(nm)
Voltage
(V)
Package
Temp.
(oC)
TRM-5001G
TRM-5001AG
622
622
0 to 1000
0 to 1000
1310
1310
5
5
1X9 SC/ST
1X9 SC/ST
0 to 70
-20 to 85
TX
Power
(dBm)
-12 to -19
-12 to -19
RX
Sens.
(dBm)
-26
-26
RoHS
Compliant
Y
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
Power Supply Voltage
Input Voltage
--Vcc
---
Output Current
Iout
Min
-40
0
-20
Units
o
C
o
C
0
GND
Max
85
70
85
250
6
Vcc
0
30
mA
Min
4.75
0
-20
100
Typ
5
Max
5.25
70
85
o
C
V
V
Notes
TRM-5001G
TRM-5001AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Vcc
Topr
622
Units
V
o
C / TRM-5001G
o
C / TRM-5001AG
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
2
Optoway
TRM-5001G
***********************************************************************************************************************************************************************
Transmitter Specifications (0 oC < Topr < 70 oC, 4.75V < Vcc < 5.25V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Total Jitter
Electrical
Power Supply Current
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
Po
-19
---12
dBm
1
1260
1310
1360
nm
λ
----10
nm
RMS (σ)
∆λ
ER
8.2
----dB
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
tr
1.2
ns
10% to 90% Values
tf
1.2
ns
10% to 90% Values
RIN
-116
dB/Hz
TJ
0.55
ns
2
Icc
IIL
IIH
VIH - VIL
V IL - VCC
V IH - VCC
140
-350
350
300
-2.0
-1.1
-1.58
-0.74
mA
µA
µA
mV
V
V
3
4
4
Notes: 1. Output power is power coupled into a 62.5/125 µm multi-mode fiber.
2. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
3. Maximum current is specified at Vcc = Maximum @ maximum temperature.
4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Power Supply Current
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
--Pin
Pa
Pd
---8
---40
1.0
1100
-28
-----------
-26
---26
--4.0
1600
dBm
dBm
dBm
dBm
dB
nm
1
100
-1.58
-0.74
-1.58
-0.74
mA
V
V
V
V
Icc
VOL - V CC
VOH - V CC
VOL - V CC
VOH - V CC
-2.0
-1.1
-2.0
-1.1
Transition: low to high
Transition: high to low
2
3
3
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 2 23-1 PRBS.
2. The current excludes the output load current.
3. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
3
Optoway
TRM-5001G
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND)
Receiver Data Out 2 (RD+)
Receiver Data Out Bar 3 (RD−)
Signal Detect 4 (SD)
Receiver Power Supply 5 (Rx Vcc)
Transmitter Power Supply 6 (Tx Vcc)
Transmitter Data In Bar 7 (TD−)
Transmitter Data In 8 (TD+)
Transmitter Signal Ground 9 (Tx GND)
PIN
1
2
3
4
5
6
7
8
9
Symbol
Rx GND
RD+
RD−
SD
Rx Vcc
Tx Vcc
TD−
TD+
Tx GND
N/C
TOP VIEW
N/C
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
See recommended circuit schematic
Active high on this indicates a received optical signal
+5V dc power for the receiver section
+5V dc power for the transmitter section
See recommended circuit schematic
See recommended circuit schematic
Directly connect this plan to the transmitter ground plane
RECOMMENDED CIRCUIT SCHEMATIC
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The
power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx
Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
4
Optoway
TRM-5001G
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) SC Duplex
TX OPTICAL
RX OPTICAL
TRM-5001G / TRM-5001AG
2) SC Duplex with metal shielding
TX OPTICAL
RX OPTICAL
TRM-5001-EMG / TRM-5001A-EMG
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
5
Optoway
TRM-5001G
***********************************************************************************************************************************************************************
3) Duplex ST
12.7
TX OPTICAL
RX OPTICAL
2.54*8
20.32
10
O1.3
20.32
0.75
13.9
5.97
15.88
13.7
25.4
34.5MAX
TRM-5001TG / TRM-5001ATG
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0