PHILIPS BUK7526-100B

BUK75/7626-100B
TrenchMOS™ standard level FET
Rev. 01 — 11 April 2003
Product data
1. Product profile
1.1 Description
N-channel enhancement mode field-effect power transistor in a plastic package using
Philips High-Performance Automotive (HPA) TrenchMOS™ technology.
Product availability:
BUK7526-100B in SOT78 (TO-220AB)
BUK7626-100B in SOT404 (D2-PAK).
1.2 Features
■ Very low on-state resistance
■ 175 °C rated
■ Q101 compliant
■ Standard level compatible.
1.3 Applications
■ Automotive systems
■ Motors, lamps and solenoids
■ 12 V, 24 V and 42 V loads
■ General purpose power switching.
1.4 Quick reference data
■ EDS(AL)S ≤ 144 mJ
■ ID ≤ 49 A
■ RDSon = 22 mΩ (typ)
■ Ptot ≤ 157 W.
2. Pinning information
Table 1:
Pinning - SOT78 and SOT404 simplified outlines and symbol
Pin
Description
1
gate (g)
2
drain (d)
3
source (s)
mb
mounting base,
connected to
drain (d)
Simplified outline
Symbol
mb
[1]
mb
d
g
MBB076
2
MBK106
1 2 3
SOT78 (TO-220AB)
[1]
1
SOT404
It is not possible to make connection to pin 2 of the SOT404 package.
3
MBK116
(D2-PAK)
s
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
3. Limiting values
Table 2:
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
VDS
drain-source voltage (DC)
VDGR
drain-gate voltage (DC)
VGS
gate-source voltage (DC)
ID
drain current (DC)
Conditions
RGS = 20 kΩ
Min
Max
Unit
-
100
V
-
100
V
-
±20
V
Tmb = 25 °C; VGS = 10 V;
Figure 2 and 3
-
49
A
Tmb = 100 °C; VGS = 10 V; Figure 2
-
34
A
IDM
peak drain current
Tmb = 25 °C; pulsed; tp ≤ 10 µs;
Figure 3
-
197
A
Ptot
total power dissipation
Tmb = 25 °C; Figure 1
-
157
W
Tstg
storage temperature
−55
+175
°C
Tj
junction temperature
−55
+175
°C
Source-drain diode
IDR
reverse drain current (DC)
Tmb = 25 °C
-
49
A
IDRM
peak reverse drain current
Tmb = 25 °C; pulsed; tp ≤ 10 µs
-
197
A
unclamped inductive load; ID = 49 A;
VDS ≤ 100 V; VGS = 10 V; RGS = 50 Ω;
starting Tmb = 25 °C
-
144
mJ
Avalanche ruggedness
EDS(AL)S non-repetitive drain-source avalanche
energy
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
2 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
03na19
120
03nm45
60
Pder
ID
(A)
(%)
80
40
40
20
0
0
0
50
100
150
200
Tmb (°C)
0
50
100
150
200
Tmb (°C)
VGS ≥ 10 V
P tot
P der = ----------------------- × 100%
P
°
tot ( 25 C )
Fig 1. Normalized total power dissipation as a
function of mounting base temperature.
Fig 2. Continuous drain current as a function of
mounting base temperature.
03nm43
103
ID
(A)
Limit RDSon = VDS/ID
102
tp = 10 µ s
100 µ s
10
DC
1 ms
10 ms
100 ms
1
1
102
10
VDS (V)
103
Tmb = 25 °C; IDM single pulse.
Fig 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage.
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
3 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
4. Thermal characteristics
Table 3:
Thermal characteristics
Symbol Parameter
Conditions
Min Typ Max Unit
Figure 4
-
-
0.95 K/W
SOT78 (TO-220AB)
vertical in still air
-
-
60
K/W
SOT404 (D2-PAK)
minimum footprint; mounted on a PCB
-
-
50
K/W
Rth(j-mb)
thermal resistance from junction to
mounting base
Rth(j-a)
thermal resistance from junction to ambient
4.1 Transient thermal impedance
03nm44
1
Zth(j-mb)
(K/W)
10-1
δ = 0.5
0.2
0.1
0.05
0.02
10-2
δ=
P
single shot
tp
T
t
tp
T
10-3
10-6
10-5
10-4
10-3
10-2
10-1
tp (s)
1
Fig 4. Transient thermal impedance from junction to mounting base as a function of pulse duration.
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
4 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
5. Characteristics
Table 4:
Characteristics
Tj = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Static characteristics
V(BR)DSS
VGS(th)
IDSS
drain-source breakdown
voltage
ID = 0.25 mA; VGS = 0 V
Tj = 25 °C
100
-
-
V
Tj = −55 °C
89
-
-
V
gate-source threshold voltage ID = 1 mA; VDS = VGS;
Figure 9
drain-source leakage current
Tj = 25 °C
2
3
4
V
Tj = 175 °C
1
-
-
V
Tj = −55 °C
-
-
4.4
V
Tj = 25 °C
-
0.02
1
µA
Tj = 175 °C
-
-
500
µA
-
2
100
nA
Tj = 25 °C
-
22
26
mΩ
Tj = 175 °C
-
-
65
mΩ
-
38
-
nC
-
9
-
nC
-
13
-
nC
VGS = 0 V; VDS = 25 V;
f = 1 MHz; Figure 12
-
2168
2891
pF
-
238
286
pF
-
102
140
pF
VDD = 30 V; RL = 1.2 Ω;
VGS = 10 V; RG = 10 Ω
-
21
-
ns
-
40
-
ns
-
47
-
ns
VDS = 100 V; VGS = 0 V
IGSS
gate-source leakage current
VGS = ±20 V; VDS = 0 V
RDSon
drain-source on-state
resistance
VGS = 10 V; ID = 25 A;
Figure 7 and 8
Dynamic characteristics
Qg(tot)
total gate charge
Qgs
gate-source charge
Qgd
gate-drain (Miller) charge
Ciss
input capacitance
Coss
output capacitance
Crss
reverse transfer capacitance
td(on)
turn-on delay time
tr
rise time
td(off)
turn-off delay time
tf
fall time
Ld
internal drain inductance
Ls
internal source inductance
VGS = 10 V; VDD = 80 V;
ID = 25 A; Figure 14
-
19
-
ns
from drain lead 6 mm from
package to centre of die
-
4.5
-
nH
from contact screw on
mounting base to centre of
die SOT78
-
3.5
-
nH
from upper edge of drain
mounting base to centre of
die SOT404
-
2.5
-
nH
from source lead 6 mm from
package to source bond pad
-
7.5
-
nH
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
5 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
Table 4:
Characteristics…continued
Tj = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
-
0.85
1.2
V
Source-drain diode
VSD
source-drain (diode forward)
voltage
IS = 25 A; VGS = 0 V;
Figure 15
trr
reverse recovery time
Qr
recovered charge
IS = 20 A; dIS/dt = −100 A/µs
VGS = −10 V; VDS = 30 V
94
-
ns
115
-
nC
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
-
Rev. 01 — 11 April 2003
6 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
03nm40
150
Label is VGS (V)
8
10
ID
(A)
03nm39
50
RDSon
(mΩ)
20
43
7.5
100
36
7
6.5
29
6
50
5.5
22
5
4.5
0
15
0
2
4
6
8
10
VDS (V)
Tj = 25 °C; tp = 300 µs
10
15
VGS (V)
20
Tj = 25 °C; ID = 25 A
Fig 5. Output characteristics: drain current as a
function of drain-source voltage; typical values.
03nm41
60
RDSon
(mΩ)
Fig 6. Drain-source on-state resistance as a function
of gate-source voltage; typical values.
03ng41
2.5
Label is VGS (V)
50
5
a
5.5
2
6
6.5
40
7
1.5
8
1
30
20
20
9
10
0.5
0
10
0
25
50
75
ID (A)
100
-60
60
120
180
Tj (°C)
Tj = 25 °C
R DSon
a = ---------------------------R DSon ( 25 °C )
Fig 7. Drain-source on-state resistance as a function
of drain current; typical values.
Fig 8. Normalized drain-source on-state resistance
factor as a function of junction temperature.
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
0
Rev. 01 — 11 April 2003
7 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
03aa32
5
03aa35
10-1
ID
(A)
VGS(th)
(V)
4
max
10-2
3
typ
10-3
2
min
10-4
1
10-5
0
10-6
-60
0
60
120
Tj (°C)
180
min
0
typ
2
max
4
VGS (V)
6
Tj = 25 °C; VDS = VGS
ID = 1 mA; VDS = VGS
Fig 9. Gate-source threshold voltage as a function of
junction temperature.
03nm37
35
Fig 10. Sub-threshold drain current as a function of
gate-source voltage.
03nm42
3000
Ciss
gfs
(S)
C
(pF)
28
2000
21
Coss
14
1000
Crss
7
0
0
25
50
75
ID (A)
100
0
10-2
1
102
10
VDS (V)
Tj = 25 °C; VDS = 25 V
VGS = 0 V; f = 1 MHz
Fig 11. Forward transconductance as a function of
drain current; typical values.
Fig 12. Input, output and reverse transfer capacitances
as a function of drain-source voltage; typical
values.
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
10-1
Rev. 01 — 11 April 2003
8 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
03nm38
100
03nm36
10
VGS
(V)
ID
(A)
8
VDD = 14 V
75
VDD = 80 V
6
50
4
25
Tj = 175 °C
Tj = 25 °C
2
0
0
0
2
4
6
VGS (V)
8
0
10
20
30
40
QG (nC)
Tj = 25 °C; ID = 25 A
VDS = 25 V
Fig 13. Transfer characteristics: drain current as a
function of gate-source voltage; typical values.
Fig 14. Gate-source voltage as a function of gate
charge; typical values.
03nm35
100
IS
(A)
75
50
25
Tj = 175 °C
Tj = 25 °C
0
0.0
0.5
1.0
VSD (V)
1.5
VGS = 0 V
Fig 15. Source (diode forward) current as a function of source-drain (diode forward) voltage; typical values.
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
9 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
6. Package outline
Plastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-220AB
E
SOT78
A
A1
p
q
mounting
base
D1
D
L2
L1(1)
Q
b1
L
1
2
3
b
c
e
e
0
5
10 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
b
b1
c
D
D1
E
e
L
L1(1)
L2
max.
p
q
Q
mm
4.5
4.1
1.39
1.27
0.9
0.7
1.3
1.0
0.7
0.4
15.8
15.2
6.4
5.9
10.3
9.7
2.54
15.0
13.5
3.30
2.79
3.0
3.8
3.6
3.0
2.7
2.6
2.2
Note
1. Terminals in this zone are not tinned.
OUTLINE
VERSION
REFERENCES
IEC
SOT78
JEDEC
EIAJ
3-lead TO-220AB
SC-46
EUROPEAN
PROJECTION
ISSUE DATE
00-09-07
01-02-16
Fig 16. SOT78 (TO-220AB).
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
10 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
Plastic single-ended surface mounted package (Philips version of D2-PAK); 3 leads
(one lead cropped)
SOT404
A
A1
E
mounting
base
D1
D
HD
2
Lp
1
3
c
b
e
e
Q
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
b
c
D
max.
D1
E
e
Lp
HD
Q
mm
4.50
4.10
1.40
1.27
0.85
0.60
0.64
0.46
11
1.60
1.20
10.30
9.70
2.54
2.90
2.10
15.80
14.80
2.60
2.20
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
EIAJ
EUROPEAN
PROJECTION
ISSUE DATE
99-06-25
01-02-12
SOT404
Fig 17. SOT404 (D2-PAK).
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
11 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
7. Soldering
10.85
10.60
10.50
handbook, full pagewidth
1.50
7.50
7.40
1.70
2.25 2.15
8.15
8.275
8.35
1.50
4.60
0.30
4.85
5.40
7.95
8.075
3.00
0.20
1.20
1.30
1.55
solder lands
solder resist
5.08
MSD057
occupied area
solder paste
Dimensions in mm.
Fig 18. Reflow soldering footprint for SOT404.
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
12 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
8. Revision history
Table 5:
Revision history
Rev Date
01
20030411
CPCN
Description
-
Product data (9397 750 11238)
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Product data
Rev. 01 — 11 April 2003
13 of 15
BUK75/7626-100B
Philips Semiconductors
TrenchMOS™ standard level FET
9. Data sheet status
Level
Data sheet status[1]
Product status[2][3]
Definition
I
Objective data
Development
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II
Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III
Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1]
Please consult the most recently issued data sheet before initiating or completing a design.
[2]
The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3]
For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
10. Definitions
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
licence or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
12. Trademarks
TrenchMOS — is a trademark of Koninklijke Philips Electronics N.V.
11. Disclaimers
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
Contact information
For additional information, please visit http://www.semiconductors.philips.com.
For sales office addresses, send e-mail to: [email protected].
Product data
Fax: +31 40 27 24825
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
9397 750 11238
Rev. 01 — 11 April 2003
14 of 15
Philips Semiconductors
BUK75/7626-100B
TrenchMOS™ standard level FET
Contents
1
1.1
1.2
1.3
1.4
2
3
4
4.1
5
6
7
8
9
10
11
12
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 1
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics. . . . . . . . . . . . . . . . . . . 4
Transient thermal impedance . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 14
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
© Koninklijke Philips Electronics N.V. 2003.
Printed in The Netherlands
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner.
The information presented in this document does not form part of any quotation or
contract, is believed to be accurate and reliable and may be changed without notice. No
liability will be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other industrial or
intellectual property rights.
Date of release: 11 April 2003
Document order number: 9397 750 11238