DISCRETE SEMICONDUCTORS DATA SHEET PSMN035-150B; PSMN035-150P N-channel TrenchMOS(TM) transistor Product specification August 1999 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor FEATURES PSMN035-150B; PSMN035-150P SYMBOL QUICK REFERENCE DATA • ’Trench’ technology • Very low on-state resistance • Fast switching • Low thermal resistance d VDSS = 150 V ID = 50 A g RDS(ON) ≤ 35 mΩ s GENERAL DESCRIPTION SiliconMAX products use the latest Philips Trench technology to achieve the lowest possible on-state resistance in each package at each voltage rating. Applications:• d.c. to d.c. converters • switched mode power supplies The PSMN035-150P is supplied in the SOT78 (TO220AB) conventional leaded package. The PSMN035-150B is supplied in the SOT404 surface mounting package. PINNING SOT78 (TO220AB) PIN SOT404 (D2PAK) DESCRIPTION tab tab 1 gate 2 drain1 3 source tab 2 drain 1 1 23 3 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER VDSS VDGR VGS ID Drain-source voltage Drain-gate voltage Gate-source voltage Continuous drain current IDM PD Tj, Tstg Pulsed drain current Total power dissipation Operating junction and storage temperature CONDITIONS MIN. MAX. UNIT Tj = 25 ˚C to 175˚C Tj = 25 ˚C to 175˚C; RGS = 20 kΩ - 55 150 150 ± 20 50 36 200 250 175 V V V A A A W ˚C Tmb = 25 ˚C Tmb = 100 ˚C Tmb = 25 ˚C Tmb = 25 ˚C 1 It is not possible to make connection to pin:2 of the SOT404 package August 1999 2 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P AVALANCHE ENERGY LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER EAS Non-repetitive avalanche energy IAS Non-repetitive avalanche current CONDITIONS MIN. MAX. UNIT - 460 mJ - 50 A TYP. MAX. UNIT - 0.6 K/W 60 50 - K/W K/W Unclamped inductive load, IAS = 47 A; tp = 100 µs; Tj prior to avalanche = 25˚C; VDD ≤ 50 V; RGS = 50 Ω; VGS = 10 V; refer to fig;15 THERMAL RESISTANCES SYMBOL PARAMETER Rth j-mb Rth j-a Thermal resistance junction to mounting base Thermal resistance junction to ambient CONDITIONS SOT78 package, in free air SOT404 package, pcb mounted, minimum footprint ELECTRICAL CHARACTERISTICS Tj= 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS V(BR)DSS VGS = 0 V; ID = 0.25 mA; VGS(TO) Drain-source breakdown voltage Gate threshold voltage Tj = -55˚C VDS = VGS; ID = 1 mA Tj = 175˚C Tj = -55˚C RDS(ON) IGSS IDSS Drain-source on-state VGS = 10 V; ID = 25 A resistance Gate source leakage current VGS = ±10 V; VDS = 0 V Zero gate voltage drain VDS = 150 V; VGS = 0 V; current Tj = 175˚C Tj = 175˚C MIN. TYP. MAX. UNIT 150 133 2.0 1.0 - 3.0 30 2 0.05 - 4.0 6 35 98 100 10 500 V V V V V mΩ mΩ nA µA µA Qg(tot) Qgs Qgd Total gate charge Gate-source charge Gate-drain (Miller) charge ID = 50 A; VDD = 120 V; VGS = 10 V - 79 17 33 - nC nC nC td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 75 V; RD = 1.5 Ω; VGS = 10 V; RG = 5.6 Ω Resistive load - 25 138 79 93 - ns ns ns ns Ld Ld Internal drain inductance Internal drain inductance - 3.5 4.5 - nH nH Ls Internal source inductance Measured from tab to centre of die Measured from drain lead to centre of die (SOT78 package only) Measured from source lead to source bond pad - 7.5 - nH Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 4720 456 208 - pF pF pF August 1999 3 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS MIN. VSD Continuous source current (body diode) Pulsed source current (body diode) Diode forward voltage IF = 25 A; VGS = 0 V trr Qrr Reverse recovery time Reverse recovery charge IS ISM August 1999 IF = 20 A; -dIF/dt = 100 A/µs; VGS = 0 V; VR = 30 V 4 TYP. MAX. UNIT - - 50 A - - 200 A - 0.85 1.2 V - 118 0.66 - ns µC Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P Normalised Power Derating, PD (%) Transient thermal impedance, Zth j-mb (K/W) 1 100 D = 0.5 90 80 0.2 0.1 70 0.1 60 0.05 50 0.02 40 P D 0.01 D = tp/T tp 30 single pulse 20 T 10 0.001 1E-06 0 0 25 50 75 100 125 150 Mounting Base temperature, Tmb (C) 175 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 Pulse width, tp (s) Fig.1. Normalised power dissipation. PD% = 100⋅PD/PD 25 ˚C = f(Tmb) Fig.4. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T Drain Current, ID (A) 50 Normalised Current Derating, ID (%) 100 90 VGS = 10V Tj = 25 C 45 8V 6V 40 80 35 70 60 30 50 25 40 20 5.2 V 30 15 5V 10 4.8 V 5.4 V 20 10 5 0 4.6 V 4.4 V 0 25 50 75 100 125 Mounting Base temperature, Tmb (C) 150 0 175 0 Fig.2. Normalised continuous drain current. ID% = 100⋅ID/ID 25 ˚C = f(Tmb) tp = 10 us 100 us 10 D.C. 1 ms 10 ms 100 ms 1 1 10 100 Drain-Source Voltage, VDS (V) 1000 4.8 V 4.4 V 4.6V 1.6 1.8 2 Tj = 25 C 5V 5.2V 5.4V 6V 8V 0 Fig.3. Safe operating area. Tmb = 25 ˚C ID & IDM = f(VDS); IDM single pulse; parameter tp August 1999 0.6 0.8 1 1.2 1.4 Drain-Source Voltage, VDS (V) Drain-Source On Resistance, RDS(on) (Ohms) 0.15 0.14 0.13 0.12 0.11 0.1 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 RDS(on) = VDS/ ID 100 0.4 Fig.5. Typical output characteristics, Tj = 25 ˚C. ID = f(VDS); parameter VGS Peak Pulsed Drain Current, IDM (A) 1000 0.2 5 10 15 20 Drain Current, ID (A) VGS = 10V 25 30 Fig.6. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(VGS) 5 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P Drain current, ID (A) 4.5 50 VDS > ID X RDS(ON) 45 4 40 3.5 35 3 30 maximum typical 2.5 175 C 25 Threshold Voltage, VGS(TO) (V) minimum 2 Tj = 25 C 20 1.5 15 10 1 5 0.5 0 0 0 1 2 3 4 5 6 7 8 9 10 -60 -40 -20 Gate-source voltage, VGS (V) 40 60 80 100 120 140 160 180 Fig.10. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS Transconductance, gfs (S) 1.0E-01 VDS > ID X RDS(ON) 50 20 Junction Temperature, Tj (C) Fig.7. Typical transfer characteristics. ID = f(VGS); parameter Tj 55 0 Drain current, ID (A) Tj = 25 C 45 1.0E-02 40 175 C 35 minimum 1.0E-03 30 typical 25 1.0E-04 20 maximum 15 1.0E-05 10 5 1.0E-06 0 0 5 10 15 20 25 30 35 Drain current, ID (A) 40 45 0 50 Fig.8. Typical transconductance, Tj = 25 ˚C. gfs = f(ID) 0.5 1 1.5 2 2.5 3 3.5 Gate-source voltage, VGS (V) 4 4.5 5 Fig.11. Sub-threshold drain current. ID = f(VGS); Tj = 25 ˚C Normalised On-state Resistance 2.9 2.7 2.5 2.3 2.1 1.9 1.7 1.5 1.3 1.1 0.9 0.7 0.5 10000 Capacitances, Ciss, Coss, Crss (pF) Ciss 1000 Coss Crss 100 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 Junction temperature, Tj (C) 0.1 100 Fig.12. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz Fig.9. Normalised drain-source on-state resistance. RDS(ON)/RDS(ON)25 ˚C = f(Tj) August 1999 1 10 Drain-Source Voltage, VDS (V) 6 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P Maximum Avalanche Current, IAS (A) 100 Gate-source voltage, VGS (V) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ID = 50A Tj = 25 C VDD = 30 V 25 C 10 VDD = 120 V Tj prior to avalanche = 150 C 0 10 20 30 40 50 60 70 Gate charge, QG (nC) 80 90 1 0.001 100 0.01 0.1 1 10 Avalanche time, tAV (ms) Fig.13. Typical turn-on gate-charge characteristics VGS = f(QG) Fig.15. Maximum permissible non-repetitive avalanche current (IAS) versus avalanche time (tAV); unclamped inductive load Source-Drain Diode Current, IF (A) 50 VGS = 0 V 45 40 35 175 C 30 Tj = 25 C 25 20 15 10 5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 Source-Drain Voltage, VSDS (V) Fig.14. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj August 1999 7 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P MECHANICAL DATA Plastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-220 E SOT78 A A1 P q D1 D L1 L2(1) Q b1 L 1 2 3 c b e e 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) (1) UNIT A A1 b b1 c D D1 E e L L1 L2 max. P q Q mm 4.5 4.1 1.39 1.27 0.9 0.7 1.3 1.0 0.7 0.4 15.8 15.2 6.4 5.9 10.3 9.7 2.54 15.0 13.5 3.30 2.79 3.0 3.8 3.6 3.0 2.7 2.6 2.2 Note 1. Terminals in this zone are not tinned. OUTLINE VERSION SOT78 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 97-06-11 TO-220 Fig.16. SOT78 (TO220AB); pin 2 connected to mounting base (Net mass:2g) Notes 1. This product is supplied in anti-static packaging. The gate-source input must be protected against static discharge during transport or handling. 2. Refer to mounting instructions for SOT78 (TO220AB) package. 3. Epoxy meets UL94 V0 at 1/8". August 1999 8 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P MECHANICAL DATA Plastic single-ended surface mounted package (Philips version of D2-PAK); 3 leads (one lead cropped) SOT404 A A1 E mounting base D1 D HD 2 Lp 1 3 c b e e Q 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b c D max. D1 E e Lp HD Q mm 4.50 4.10 1.40 1.27 0.85 0.60 0.64 0.46 11 1.60 1.20 10.30 9.70 2.54 2.90 2.10 15.40 14.80 2.60 2.20 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 98-12-14 99-06-25 SOT404 Fig.17. SOT404 surface mounting package. Centre pin connected to mounting base. Notes 1. This product is supplied in anti-static packaging. The gate-source input must be protected against static discharge during transport or handling. 2. Refer to SMD Footprint Design and Soldering Guidelines, Data Handbook SC18. 3. Epoxy meets UL94 V0 at 1/8". August 1999 9 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P MOUNTING INSTRUCTIONS Dimensions in mm 11.5 9.0 17.5 2.0 3.8 5.08 Fig.18. SOT404 : soldering pattern for surface mounting. DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. August 1999 10 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOS(TM) transistor PSMN035-150B; PSMN035-150P NOTES August 1999 11 Rev 1.000 Philips Semiconductors – a worldwide company Argentina: see South America Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstraße 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI), Tel. +39 039 203 6838, Fax +39 039 203 6800 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW, Tel. +48 22 5710 000, Fax. +48 22 5710 001 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 58088 Newville 2114, Tel. +27 11 471 5401, Fax. +27 11 471 5398 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SÃO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260, Tel. +66 2 745 4090, Fax. +66 2 398 0793 Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye, ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 3341 299, Fax.+381 11 3342 553 For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Internet: http://www.semiconductors.philips.com SCA 69 © Philips Electronics N.V. 2000 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 603502/300/03/pp12 Date of release: August 1999 Document order number: 9397 750 06973