K1100BA, K1150BA, K1125BA, K1110BA Series 14 pin DIP, 5.0 Volt, Clock Oscillator 4-pin Package, Compatible with 14-pin DIL K1100BA Series K1100BA Series 5V Crystal Clock Oscillators �� 5V Crystal Clock Oscillators ��� �� �� � � � � � �� �� ��� ��� ��� �� � � � �� �� �� ��� ������������������ � � ��� �� � � � ��� ��� ����������� ��� � � �� � � � � � � � � �� ������������������ � ��� � 1.0MHz to 70MHz Frequency Range 4-pin Package, Compatible with 14-pin DIL HCMOS Circuit, TTL/CMOS Compatible 1.0MHz to Tight 70MHz Frequency Range Available Symmetry (45/55%) HCMOS Circuit, TTL/CMOS Compatible Tri-State Option Available Tight Symmetry (45/55%) ±100ppm StabilityAvailable Standard Tri-State Option Available Tighter Stabilities Available � ���� � ±100ppm Stability Standard ±10ppm Stability:- K1110BA Tighter Stabilities ±25ppmAvailable Stability:- K1125BA ����� ±10ppm Stability:K1110BA ±50ppm Stability:- K1150BA ±25ppm Stability:- K1125BA ±50ppm Stability:- K1150BA ����� E L E C T R I C A L S P E C I F I C AT I O N S MODEL MODEL Frequency Stability (ppm) Frequency Range (MHz) Overall Frequency Stability (ppm) 0°C to 70°C Overall -40°C to 85°C 0°C to 70°C Temperature Range (°C) -40°C to 85°C Operating Temperature Range (°C) Storage ±100 Inclusive of calibration, temperature,±50 voltage, load, shock,vibration, aging±100 ±150 ±100 ±50 ±150 ±100 ±25 Rating Over Temperature Only ±25 Rating Over ±10 Temperature Only N/A NA ±10 NA -40°C to +85°C +5.0 ±10% N/A 15 50 15 50 40/60% @ 1.4V; 45/55% Optional TR and TF (ns) ≤20MHz =8; > 20MHz = 6 40/60% @ 1.4V; 45/55% Optional 10 ≤20MHz =8; > 20MHz = 6 Fanout (TTL) TR and TF (ns) Output CMOS Fanout (TTL) Symmetry 10 TR and TF (ns) 40/60 @ 0.5VCC ≤20MHz =10; > 20MHz = 8 40/60 @ 0.5VCC <10 ≤20MHz =10; > 20MHz = 8 Start up Time (ms) TR and TF (ns) Start up Time (ms) K1110BA -55°C to +125°C -40°C to +85°C+5.0 ±10% -55°C to +125°C Symmetry Symmetry K1110BA 1.0 to 70 Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 20 - 70 MHz Output CMOS 1.0 to 70 K1125BA K1150BA K1100BA Supply Current (mA) 20 - 70 MHz <20MHz Output TTL Symmetry K1125BA E L E C T R I C A L S P E C I F I C AT I O N S Operating Supply Voltage (V) StorageSupply Current (mA) Supply Voltage (V) <20MHz Output TTL K1150BA K1100BA Frequency Range (MHz) <10 PART NUMBERING PA R T N U M B E R IGUIDE NG GUIDE - Specify Frequency K11XXBACXXX K11XXBACXXX-R - Specify Frequency PA R“-R” T N=URoHS M B ECompliant R I N G =G0oUCI D “Blank” toE70oC Operating Temperature K11XXBACXXX - Specify Frequency oC to 85oC Operating Temperature “M” = -40 “Blank” = Non-RoHS Compliant oC to 70oC Operating Temperature “Blank” = 0“Blank” Fixed Frequency “Blank” = 0°C to 70°Co=Operating Temperature “M” = -40oC to 85 C Operating Temperature “E” = Tri-State “M” = -40°C to 85°C Operating Temperature “Blank” = Fixed Frequency “Blank” = 40/60% Symmetry “Blank” = Fixed Frequency “E” = Tri-State “E” = Tri-State“S” = 45/55 Symmetry “Blank” = 40/60% Symmetry “C” = CMOS Output “Blank” = 40/60% Symmetry “S” = 45/55Model Symmetry Selection: See Table Above “S” = 45/55% Symmetry “C” = CMOS Output “C”Model = CMOS Output Selection: See Table Above 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 y Fax: 847.451.7585 Model Selection: SeeyTable Above MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 2553 N. Edgington Street, Franklin Park, IL 60131 yor Phone: 847.451.1000 y Fax: 847.451.7585 800-888-1499 www.champtech.com Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 1 800-888-1499 or www.champtech.com 1 Revision: 8-25-06 K1100BA Series K1100BA, K1150BA, K1125BA, K1110BA Series 14 pin DIP, 5.0 Volt, Clock Oscillator 5V Crystal Clock Oscillators PIN FUNCTION 1 N/C / Tri-State 2 Ground 3 Output 4 + VCC SHIPPING TUBE CROSS SECTION TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com 2 Revision: 8-25-06