K1400A Series 5V Crystal Clock Oscillators ! ! ! ! ! ! True Sinewave Output Clock Oscillator Discrete Frequencies to 140MHz Low Harmonic Signal Source Standard Metal DIL Package ax. mM 8m , 0 2 0A HZ E K14000.000 MTE COD 1 TI DA C ±100ppm Standard ±50ppm Stability Available - K1450A -40oC to 85oC Operating Temperature ax. mM 2m , 3 1 m 2m 6,2 x. Ma PIN 1 E L E C T R I C A L S P E C I F I C AT I O N S MODEL K1400A Frequency Range (MHz) Discrete Frequencies to 140MHz Frequency Stability (ppm) Overall Inclusive of calibration, temperature, voltage, load, shock,vibration, aging OBSOLETE 0°C to 70°C ±50, ±100 Temperature Range (°C) Operating -40°C to +85°C Storage -55°C to +125°C Supply Voltage (V) +5.0 ±5% Supply Current (mA) <25 Load 50Ω Output Signal Sinewave Output Level ±3dBm Output Harmonics <-20dBC 2nd and Above PA R T N U M B E R I N G G U I D E K14XXAX - Specify Frequency “Blank” = 0oC to 70oC Operating Temperature “M” = -40oC to 85oC Operating Temperature “00” = ±100 Stability “50” = ±50ppm Stability (Available only 0oC to 70o) 2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: 847.451.1000 " Fax: 847.451.7585 800-888-1499 or www.champtech.com 1 K1400A Series 5V Crystal Clock Oscillators PIN FUNCTION 1 N/C 2 Ground 3 Output 4 + VCC SHIPPING TUBE CROSS SECTION OBSOLETE MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum 2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: 847.451.1000 " Fax: 847.451.7585 800-888-1499 or www.champtech.com 2