PDTB123Y series PNP 500 mA, 50 V resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ Rev. 01 — 27 April 2005 Product data sheet 1. Product profile 1.1 General description 500 mA PNP Resistor-Equipped Transistors (RET) family. Table 1: Product overview Type number Package NPN complement Philips JEITA JEDEC PDTB123YK SOT346 SC-59A TO-236 PDTD123YK PDTB123YS [1] SOT54 SC-43A TO-92 PDTD123YS PDTB123YT SOT23 - TO-236AB PDTD123YT [1] Also available in SOT54A and SOT54 variant packages (see Section 2). 1.2 Features ■ Built-in bias resistors ■ Simplifies circuit design ■ 500 mA output current capability ■ Reduces component count ■ Reduces pick and place costs ■ ±10 % resistor ratio tolerance 1.3 Applications ■ Digital application in automotive and industrial segments ■ Controlling IC inputs ■ Cost-saving alternative for BC807 series in digital applications ■ Switching loads 1.4 Quick reference data Table 2: Quick reference data Symbol Parameter Conditions VCEO collector-emitter voltage open base IO output current (DC) R1 bias resistor 1 (input) R2/R1 bias resistor ratio Min Typ Max Unit - - −50 V - - −500 mA 1.54 2.2 2.86 kΩ 4.1 4.55 5 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 2. Pinning information Table 3: Pinning Pin Description Simplified outline Symbol SOT54 1 input (base) 2 output (collector) 3 GND (emitter) 2 R1 1 2 3 1 R2 001aab347 3 006aaa148 SOT54A 1 input (base) 2 output (collector) 3 GND (emitter) 2 R1 1 2 1 R2 3 001aab348 3 006aaa148 SOT54 variant 1 input (base) 2 output (collector) 3 GND (emitter) 2 R1 1 2 3 1 R2 001aab447 3 006aaa148 SOT23, SOT346 1 input (base) 2 GND (emitter) 3 3 3 R1 output (collector) 1 R2 1 2 006aaa144 9397 750 14905 Product data sheet 2 sym003 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 2 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 3. Ordering information Table 4: Ordering information Type number Package Name Description Version PDTB123YK SC-59A plastic surface mounted package; 3 leads SOT346 PDTB123YS [1] SC-43A plastic single-ended leaded (through hole) package; 3 leads SOT54 PDTB123YT - plastic surface mounted package; 3 leads SOT23 [1] Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9). 4. Marking Table 5: Marking codes Type number Marking code [1] PDTB123YK E8 PDTB123YS B123YS PDTB123YT *7Y [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - −50 V VCEO collector-emitter voltage open base - −50 V VEBO emitter-base voltage open collector - −5 V VI input voltage positive - +5 V negative - −12 V - −500 mA IO output current (DC) Ptot total power dissipation Tamb ≤ 25 °C SOT346 [1] - 250 mW SOT54 [1] - 500 mW SOT23 [1] - 250 mW Tstg storage temperature −65 +150 °C Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. 9397 750 14905 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 3 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 6. Thermal characteristics Table 7: Symbol Rth(j-a) [1] Thermal characteristics Parameter Conditions Min Typ Max Unit SOT346 - - 500 K/W SOT54 - - 250 K/W SOT23 - - 500 K/W thermal resistance from junction to ambient in free air [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. 7. Characteristics Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter Conditions Typ Max Unit ICBO collector-base cut-off VCB = −40 V; IE = 0 A current VCB = −50 V; IE = 0 A - - −100 nA - - −100 nA ICEO collector-emitter cut-off current VCE = −50 V; IB = 0 A - - −0.5 µA IEBO emitter-base cut-off current VEB = −5 V; IC = 0 A - - −0.65 mA hFE DC current gain VCE = −5 V; IC = −50 mA 70 - - VCEsat collector-emitter saturation voltage IC = −50 mA; IB = −2.5 mA - - −0.3 mV VI(off) off-state input voltage VCE = −5 V; IC = −100 µA −0.4 −0.6 −1.0 V VI(on) on-state input voltage VCE = −0.3 V; IC = −20 mA −0.5 −1.0 −1.4 V R1 bias resistor 1 (input) 1.54 2.2 2.86 kΩ R2/R1 bias resistor ratio 4.1 4.55 5 Cc collector capacitance VCB = −10 V; IE = ie = 0 A; f = 100 MHz - 11 - 9397 750 14905 Product data sheet Min pF © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 4 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 006aaa357 103 006aaa358 −10−1 (1) hFE (2) VCEsat (V) (3) 102 (1) (2) 10 1 −10−1 (3) −1 −10 −102 −103 −10−2 −1 −102 −10 IC (mA) IC (mA) VCE = −5 V IC/IB = 20 (1) Tamb = 100 °C (1) Tamb = 100 °C (2) Tamb = 25 °C (2) Tamb = 25 °C (3) Tamb = −40 °C (3) Tamb = −40 °C Fig 1. DC current gain as a function of collector current; typical values 006aaa359 −10 Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values 006aaa360 −10 VI(off) (V) VI(on) (V) (1) (1) (2) −10−1 −10−1 (2) (3) −1 −1 −1 −10 −102 −103 (3) −10−1 −10−1 IC (mA) −10 IC (mA) VCE = −0.3 V VCE = −5 V (1) Tamb = −40 °C (1) Tamb = −40 °C (2) Tamb = 25 °C (2) Tamb = 25 °C (3) Tamb = 100 °C (3) Tamb = 100 °C Fig 3. On-state input voltage as a function of collector current; typical values Fig 4. Off-state input voltage as a function of collector current; typical values 9397 750 14905 Product data sheet −1 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 5 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 8. Package outline 1.3 1.0 3.1 2.7 3 0.45 0.38 4.2 3.6 0.6 0.2 0.48 0.40 3.0 1.7 2.5 1.3 1 2 4.8 4.4 1 2.54 3 1.27 2 0.50 0.35 1.9 0.26 0.10 Dimensions in mm 5.2 5.0 Dimensions in mm 04-11-11 Fig 5. Package outline SOT346 (SC-59A/TO-236) 04-11-16 Fig 6. Package outline SOT54 (SC-43A/TO-92) 0.45 0.38 0.45 0.38 4.2 3.6 14.5 12.7 4.2 3.6 1.27 0.48 0.40 3 max 1 2.5 max 0.48 0.40 1 2 4.8 4.4 5.08 2 4.8 4.4 2.54 2.54 3 1.27 3 5.2 5.0 5.2 5.0 14.5 12.7 Dimensions in mm 04-06-28 14.5 12.7 Dimensions in mm Fig 7. Package outline SOT54A 05-01-10 Fig 8. Package outline SOT54 variant 3.0 2.8 1.1 0.9 3 0.45 0.15 2.5 1.4 2.1 1.2 1 2 1.9 0.48 0.38 Dimensions in mm 0.15 0.09 04-11-04 Fig 9. Package outline SOT23 (TO-236AB) 9397 750 14905 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 6 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 9. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package Description Packing quantity 3000 10000 PDTB123YK SOT346 4 mm pitch, 8 mm tape and reel -115 - -135 PDTB123YS SOT54 bulk, straight leads - -412 - SOT54A tape and reel, wide pitch - - -116 tape ammopack, wide pitch - - -126 SOT54 variant bulk, delta pinning - -112 - SOT23 4 mm pitch, 8 mm tape and reel -215 - -235 PDTB123YT [1] For further information and the availability of packing methods, see Section 14. 9397 750 14905 Product data sheet 5000 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 7 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 10. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PDTB123Y_SER_1 20050427 Product data sheet - 9397 750 14905 - 9397 750 14905 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 8 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 11. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions 13. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 14905 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 27 April 2005 9 of 10 PDTB123Y series Philips Semiconductors PNP 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = 10 kΩ 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 3 3 3 4 4 6 7 8 9 9 9 9 © Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 27 April 2005 Document number: 9397 750 14905 Published in The Netherlands