PDTC143X series NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ Rev. 09 — 26 July 2005 Product data sheet 1. Product profile 1.1 General description NPN Resistor-Equipped Transistors (RET) family. Table 1: Product overview Type number Package PNP complement Philips JEITA JEDEC PDTC143XE SOT416 SC-75 - PDTA143XE PDTC143XEF SOT490 SC-89 - PDTA143XEF PDTC143XK SOT346 SC-59A TO-236 PDTA143XK PDTC143XM SOT883 SC-101 - PDTA143XM PDTC143XS [1] SOT54 SC-43A TO-92 PDTA143XS PDTC143XT SOT23 - TO-236AB PDTA143XT PDTC143XU SOT323 SC-70 - PDTA143XU [1] Also available in SOT54A and SOT54 variant packages (see Section 2). 1.2 Features ■ Built-in bias resistors ■ Simplifies circuit design ■ 100 mA output current capability ■ Reduces component count ■ Reduces pick and place costs 1.3 Applications ■ Digital applications ■ Controlling IC inputs ■ Cost-saving alternative for BC847 series in digital applications ■ Switching loads 1.4 Quick reference data Table 2: Quick reference data Symbol Parameter Conditions Min Typ Max Unit VCEO collector-emitter voltage open base - - 50 V IO output current - - 100 mA R1 bias resistor 1 (input) 3.3 4.7 6.1 kΩ R2/R1 bias resistor ratio 1.7 2.1 2.6 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 2. Pinning information Table 3: Pinning Pin Description Simplified outline Symbol SOT54 1 input (base) 2 output (collector) 3 2 R1 GND (emitter) 1 2 3 1 R2 001aab347 3 006aaa145 SOT54A 1 input (base) 2 output (collector) 3 2 R1 GND (emitter) 1 2 1 R2 3 001aab348 3 006aaa145 SOT54 variant 1 input (base) 2 output (collector) 3 2 R1 GND (emitter) 1 2 3 1 R2 001aab447 3 006aaa145 SOT23; SOT323; SOT346; SOT416; SOT490 1 input (base) 2 GND (emitter) 3 3 3 R1 output (collector) 1 R2 1 2 2 006aaa144 sym007 SOT883 1 input (base) 2 GND (emitter) 3 output (collector) 1 3 3 2 R1 1 Transparent top view R2 2 sym007 PDTC143X_SER_9 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 2 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 3. Ordering information Table 4: Ordering information Type number Package Name Description Version PDTC143XE SC-75 plastic surface mounted package; 3 leads SOT416 PDTC143XEF SC-89 plastic surface mounted package; 3 leads SOT490 PDTC143XK SC-59A plastic surface mounted package; 3 leads SOT346 PDTC143XM SC-101 leadless ultra small plastic package; 3 solder lands; body 1.0 × 0.6 × 0.5 mm SOT883 PDTC143XS [1] SC-43A plastic single-ended leaded (through hole) package; 3 leads SOT54 PDTC143XT - plastic surface mounted package; 3 leads SOT23 PDTC143XU SC-70 plastic surface mounted package; 3 leads SOT323 [1] Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9). 4. Marking Table 5: Marking codes Type number Marking code [1] PDTC143XE 34 PDTC143XEF 54 PDTC143XK 26 PDTC143XM E2 PDTC143XS TC143X PDTC143XT *32 PDTC143XU *53 [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China PDTC143X_SER_9 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 3 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - 50 V VCEO collector-emitter voltage open base - 50 V VEBO emitter-base voltage open collector - 7 V VI input voltage positive - +20 V negative - −7 V IO output current - 100 mA ICM peak collector current single pulse; tp ≤ 1 ms - 100 mA Ptot total power dissipation Tamb ≤ 25 °C SOT416 [1] - 150 mW SOT490 [1] [2] - 250 mW SOT346 [1] - 250 mW SOT883 [2] [3] - 250 mW SOT54 [1] - 500 mW SOT23 [1] - 250 mW SOT323 [1] - 200 mW Tstg storage temperature −65 +150 °C Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint. PDTC143X_SER_9 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 4 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 6. Thermal characteristics Table 7: Thermal characteristics Symbol Parameter Conditions Rth(j-a) thermal resistance from junction to ambient in free air Min Typ Max Unit SOT416 [1] - - 833 K/W SOT490 [1] [2] - - 500 K/W SOT346 [1] - - 500 K/W SOT883 [2] [3] - - 500 K/W SOT54 [1] - - 250 K/W SOT23 [1] - - 500 K/W SOT323 [1] - - 625 K/W [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint. 7. Characteristics Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit ICBO collector-base cut-off current VCB = 50 V; IE = 0 A - - 100 nA ICEO collector-emitter cut-off current VCE = 30 V; IB = 0 A - - 1 µA VCE = 30 V; IB = 0 A; Tj = 150 °C - - 50 µA µA IEBO emitter-base cut-off current VEB = 5 V; IC = 0 A - - 600 hFE DC current gain VCE = 5 V; IC = 10 mA 50 - - VCEsat collector-emitter saturation voltage IC = 10 mA; IB = 0.5 mA - - 100 mV VI(off) off-state input voltage VCE = 5 V; IC = 100 µA - - 0.3 V VI(on) on-state input voltage VCE = 300 mV; IC = 20 mA 2.5 - - V R1 bias resistor 1 (input) 3.3 4.7 6.1 kΩ R2/R1 bias resistor ratio 1.7 2.1 2.6 Cc collector capacitance - - 2.5 VCB = 10 V; IE = ie = 0 A; f = 1 MHz PDTC143X_SER_9 Product data sheet pF © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 5 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 006aaa178 103 hFE (2) 006aaa179 103 (1) VCEsat (mV) (3) 102 102 (2) (1) (3) 10 1 10−1 1 102 10 10 1 I C (mA) VCE = 5 V IC/IB = 20 (1) Tamb = 100 °C (1) Tamb = 100 °C (2) Tamb = 25 °C (2) Tamb = 25 °C (3) Tamb = −40 °C (3) Tamb = −40 °C Fig 1. DC current gain as a function of collector current; typical values 006aaa180 102 102 10 I C (mA) Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values 006aaa181 10 VI(on) (V) VI(off) (V) 10 (1) (2) 1 (1) (2) (3) 1 10−1 10−1 1 (3) 102 10 10−1 10−2 IC (mA) 1 10 I C (mA) VCE = 0.3 V VCE = 5 V (1) Tamb = −40 °C (1) Tamb = −40 °C (2) Tamb = 25 °C (2) Tamb = 25 °C (3) Tamb = 100 °C (3) Tamb = 100 °C Fig 3. On-state input voltage as a function of collector current; typical values Fig 4. Off-state input voltage as a function of collector current; typical values PDTC143X_SER_9 Product data sheet 10−1 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 6 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 8. Package outline 3 3 0.45 0.15 0.6 0.2 3.0 1.7 2.5 1.3 1.75 0.9 1.45 0.7 1 2 1 0.30 0.15 2 0.25 0.10 Dimensions in mm 04-11-04 Fig 5. Package outline SOT416 (SC-75) 0.62 0.55 0.55 0.47 0.50 0.35 1.9 1 0.26 0.10 Dimensions in mm 04-11-11 Fig 6. Package outline SOT346 (SC-59A/TO-236) 0.50 0.46 0.45 0.38 4.2 3.6 3 0.30 0.22 2 0.48 0.40 1.02 0.95 0.65 0.30 0.22 1.3 1.0 3.1 2.7 0.95 0.60 1.8 1.4 1 2 4.8 4.4 1 0.20 0.12 2.54 3 5.2 5.0 0.35 Dimensions in mm 03-04-03 Fig 7. Package outline SOT883 (SC-101) 14.5 12.7 Dimensions in mm 04-11-16 Fig 8. Package outline SOT54 (SC-43A/TO-92) 0.45 0.38 0.45 0.38 4.2 3.6 1.27 4.2 3.6 1.27 0.48 0.40 3 max 1 2.5 max 0.48 0.40 1 2 4.8 4.4 5.08 2.54 2 4.8 4.4 2.54 3 1.27 3 5.2 5.0 5.2 5.0 14.5 12.7 Dimensions in mm Fig 9. Package outline SOT54A 04-06-28 Dimensions in mm 05-01-10 Fig 10. Package outline SOT54 variant PDTC143X_SER_9 Product data sheet 14.5 12.7 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 7 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 3.0 2.8 1.1 0.9 2.2 1.8 1.1 0.8 0.45 0.15 3 3 0.45 0.15 2.5 1.4 2.1 1.2 2.2 1.35 2.0 1.15 1 1 2 1.9 0.48 0.38 2 0.4 0.3 0.15 0.09 Dimensions in mm 0.25 0.10 1.3 04-11-04 Dimensions in mm Fig 11. Package outline SOT23 (TO-236AB) 04-11-04 Fig 12. Package outline SOT323 (SC-70) 1.7 1.5 0.8 0.6 3 0.5 0.3 1.7 0.95 1.5 0.75 1 2 0.33 0.23 0.2 0.1 1 Dimensions in mm 98-10-23 Fig 13. Package outline SOT490 (SC-89) PDTC143X_SER_9 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 8 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 9. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package PDTC143XE Description 3000 4000 5000 10000 SOT416 4 mm pitch, 8 mm tape and reel -115 - - -135 PDTC143XEF SOT490 4 mm pitch, 8 mm tape and reel - -115 - - PDTC143XK SOT346 4 mm pitch, 8 mm tape and reel -115 - - -135 PDTC143XM SOT883 2 mm pitch, 8 mm tape and reel - - - -315 PDTC143XS SOT54 bulk, straight leads - - -412 - SOT54A tape and reel, wide pitch - - - -116 tape ammopack, wide pitch - - - -126 SOT54 variant bulk, delta pinning - - -112 - PDTC143XT SOT23 4 mm pitch, 8 mm tape and reel -215 - - -235 PDTC143XU SOT323 4 mm pitch, 8 mm tape and reel -115 - - -135 [1] For further information and the availability of packing methods, see Section 15. PDTC143X_SER_9 Product data sheet Packing quantity © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 9 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 10. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PDTC143X_SER_9 20050726 Product data sheet - PDTC143X_SERIES_8 Modifications: - • The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. • • • • • • • • • Section 1.2 “Features”: amended Section 1.3 “Applications”: amended Table 6 “Limiting values”: typing error for value of VEBO emitter-base voltage corrected Table 8 “Characteristics”: Vi(on) redefined to VI(on) on-state input voltage Table 8 “Characteristics”: Vi(off) redefined to VI(off) off-state input voltage Figure 1, 2, 3, 4, 9 and 10: added Figure 5, 6, 7, 8, 11, 12 and 13: superseded by minimized package outlines Section 9 “Packing information”: added Section 14 “Trademarks”: added PDTC143X_SERIES_8 20040806 Product specification - 9397 750 13676 PDTC143X_SERIES_7 PDTC143X_SERIES_7 20040323 Product specification - 9397 750 12962 PDTC143X_SERIES_6 PDTC143X_SERIES_6 20040112 Product specification - 9397 750 12444 PDTC143X_SERIES_5 PDTC143X_SERIES_5 20031112 Product specification - 9397 750 12196 PDTC143X_SERIES_4 PDTC143X_SERIES_4 20030910 Product specification - 9397 750 11736 PDTC143X_SERIES_3 PDTC143X_SERIES_3 20030410 Product specification - 9397 750 11022 PDTC143XE_2 PDTC143XK_1 PDTC143XT_1 PDTC143XE_2 19990521 Product specification - 9397 750 05865 PDTC143XE_1 PDTC143XE_1 19980529 Product specification - 9397 750 03914 - PDTC143XK_1 20020115 Product specification - 9397 750 09147 - PDTC143XT_1 19990420 Product specification - 9397 750 04931 - PDTC143X_SER_9 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 10 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 11. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 14. Trademarks 13. Disclaimers Notice — All referenced brands, product names, service names and trademarks are the property of their respective owners. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 15. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] PDTC143X_SER_9 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 09 — 26 July 2005 11 of 12 PDTC143X series Philips Semiconductors NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ 16. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 3 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packing information. . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 © Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 26 July 2005 Document number: PDTC143X_SER_9 Published in The Netherlands