V630ME15 PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • WLAN • Digital Radios • Earthstations £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2165 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -97 Harmonic Suppression (2nd) -10 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 2360 MHz dBc/Hz -8 dBc 10 Vdc MHz/V 48 6 11 dBm Input Capacitance 50 pF Pushing 5 MHz/V Pulling (14 dB Return Loss, Any Phase) 13 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 8.5 MINI-14H Min Typ 5 24 Vdc 29 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V630ME15 Rev B2 Tuning Curve, typ. 2550 FREQUENCY (MHz) 2500 2450 2400 2350 85 °C 25 °C -40 °C 2300 2250 2200 2150 2100 2050 2000 1950 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 14 13 12 11 10 9 0.030 MIN. CUTBACK FROM LIVE PADS 8 7 6 5 4 1990 2075 2139 2194 2244 2290 2335 2378 2422 2466 2510 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B