V630ME41-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • WiMAX • Earthstations • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2154 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -96 Harmonic Suppression (2nd) -17 Tuning Voltage 0.5 Max Units 2332 MHz dBc/Hz -15 dBc 4.5 Vdc MHz/V 69 Tuning Sensitivity (avg.) 5 dBm Input Capacitance 50 pF Pushing 4 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 70 °C Max Units Power Output -2 Load Impedance Operating Temperature Range 50 -25 Package Style Power Supply Requirements 1.5 MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 15 Vdc 18 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V630ME41-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 2410 2390 2370 2350 2330 2310 2290 2270 2250 2230 2210 2190 2170 2150 2130 2110 2090 2070 2050 2030 2010 70 °C 25 °C -25 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 -1 -2 2050 2107 2153 2193 2230 2264 2296 2327 2356 2383 FREQUENCY (MHz) 70 °C 25 °C -25 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B