PMEG2015EH; PMEG2015EJ 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers Rev. 02 — 7 April 2005 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for stress protection encapsulated in small and flat SMD plastic packages. Table 1: Product overview Type number Package Configuration Philips JEITA PMEG2015EH SOD123F - single diode PMEG2015EJ SOD323F SC-90 single diode 1.2 Features ■ ■ ■ ■ Forward current: ≤ 1.5 A Reverse voltage: ≤ 20 V Very low forward voltage Small and flat lead SMD plastic packages 1.3 Applications ■ ■ ■ ■ ■ Low voltage rectification High efficiency DC-to-DC conversion Switch mode power supply Inverse polarity protection Low and medium power general applications 1.4 Quick reference data Table 2: Quick reference data Symbol Parameter Conditions Min Typ Max Unit IF forward current Tsp ≤ 55 °C - - 1.5 A VR reverse voltage - - 20 V - 560 660 mV VF [1] forward voltage Pulse test: tp ≤ 300 µs; δ ≤ 0.02. IF = 1.5 A [1] PMEG2015EH; PMEG2015EJ Philips Semiconductors 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers 2. Pinning information Table 3: Pinning Pin Description 1 cathode 2 anode Simplified outline Symbol [1] 1 1 2 2 sym001 001aab540 [1] The marking bar indicates the cathode. 3. Ordering information Table 4: Ordering information Type number Package Name Description Version PMEG2015EH - plastic surface mounted package; 2 leads SOD123F PMEG2015EJ SC-90 plastic surface mounted package; 2 leads SOD323F 4. Marking Table 5: Marking codes Type number Marking code PMEG2015EH AD PMEG2015EJ EL 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions VR reverse voltage IF forward current Tsp ≤ 55 °C IFRM repetitive peak forward current tp ≤ 1 ms; δ ≤ 0.25 IFSM non-repetitive peak forward current square wave; tp = 8 ms Ptot total power dissipation Tamb ≤ 25 °C PMEG2015EH PMEG2015EJ Max Unit 20 V - 1.5 A - 5.5 A [1] - 9 A [1] - 375 mW [2] - 830 mW [1] - 360 mW [2] - 830 mW Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C 9397 750 14916 Product data sheet Min - © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 7 April 2005 2 of 9 PMEG2015EH; PMEG2015EJ Philips Semiconductors 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers Table 6: Limiting values …continued In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Tstg Conditions storage temperature Min Max Unit −65 +150 °C [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. 6. Thermal characteristics Table 7: Thermal characteristics Symbol Parameter Conditions Rth(j-a) thermal resistance from junction to ambient in free air Min Typ Max Unit [1] [2] - - 330 K/W [2] [3] - - 150 K/W [1] [2] - - 350 K/W [2] [3] - - 150 K/W PMEG2015EH - - 60 K/W PMEG2015EJ - - 55 K/W PMEG2015EH PMEG2015EJ Rth(j-sp) thermal resistance from junction to solder point [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] For Schottky barrier diodes thermal run-away has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating are available on request. [3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. 7. Characteristics Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol VF IR Cd [1] Parameter Conditions forward voltage reverse current diode capacitance Min Typ Max Unit IF = 10 mA [1] - 240 270 mV IF = 100 mA [1] - 300 350 mV IF = 500 mA [1] - 400 460 mV IF = 1 A [1] - 480 550 mV IF = 1.5 A [1] - 560 660 mV VR = 5 V - 5 10 µA VR = 8 V - 7 20 µA VR = 10 V - 8 30 µA VR = 15 V - 10 50 µA VR = 20 V - 15 70 µA VR = 1 V; f = 1 MHz - 40 50 pF Pulse test: tp ≤ 300 µs; δ ≤ 0.02. 9397 750 14916 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 7 April 2005 3 of 9 PMEG2015EH; PMEG2015EJ Philips Semiconductors 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers 006aaa402 104 IF (mA) 103 IR (µA) 102 006aaa403 105 (1) 104 (2) 103 (3) 102 (1) (2) (3) (4) (5) 10 (4) 10 1 1 10−1 10−1 (5) 10−2 10−2 10−3 0 0.1 0.2 0.3 0.4 0.5 0.6 VF (V) 0 5 10 15 20 VR (V) (1) Tamb = 150 °C (1) Tamb = 150 °C (2) Tamb = 125 °C (2) Tamb = 125 °C (3) Tamb = 85 °C (3) Tamb = 85 °C (4) Tamb = 25 °C (4) Tamb = 25 °C (5) Tamb = −40 °C (5) Tamb = −40 °C Fig 1. Forward current as a function of forward voltage; typical values Fig 2. Reverse current as a function of reverse voltage; typical values 006aaa404 80 Cd (pF) 60 40 20 0 0 5 10 15 20 VR (V) Tamb = 25 °C; f = 1 MHz Fig 3. Diode capacitance as a function of reverse voltage; typical values 9397 750 14916 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 7 April 2005 4 of 9 PMEG2015EH; PMEG2015EJ Philips Semiconductors 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers 8. Package outline 1.7 1.5 1.2 1.0 1.35 1.15 1 0.80 0.65 0.5 0.3 1 0.55 0.35 3.6 3.4 2.7 2.3 2.7 2.5 1.8 1.6 2 2 0.70 0.55 0.40 0.25 0.25 0.10 Dimensions in mm 04-11-29 Fig 4. Package outline SOD123F 0.25 0.10 Dimensions in mm 04-09-13 Fig 5. Package outline SOD323F (SC-90) 9. Packing information Table 9: Packing methods The -xxx numbers are the last three digits of the 12NC ordering code. [1] Type number Package Description PMEG2015EH SOD123F 4 mm pitch, 8 mm tape and reel PMEG2015EJ SOD323F [1] Packing quantity 3000 10000 -115 -135 For further information and the availability of packing methods, see Section 15. 10. Soldering 4.4 4 2.9 1.6 solder lands solder resist 2.1 1.6 1.1 1.2 solder paste occupied area 1.1 (2×) Reflow soldering is the only recommended soldering method. Dimensions in mm Fig 6. Reflow soldering footprint SOD123F 9397 750 14916 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 7 April 2005 5 of 9 PMEG2015EH; PMEG2015EJ Philips Semiconductors 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers 3.05 2.80 2.10 1.60 solder lands solder resist 1.65 0.95 0.50 0.60 occupied area solder paste 0.50 (2×) 001aab169 Reflow soldering is the only recommended soldering method. Dimensions in mm Fig 7. Reflow soldering footprint SOD323F (SC-90) 9397 750 14916 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 7 April 2005 6 of 9 Philips Semiconductors PMEG2015EH; PMEG2015EJ 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers 11. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PMEG2015EH_EJ_2 20050407 Product data sheet - 9397 750 14916 PMEG2015EJ_1 9397 750 14594 - Modifications: PMEG2015EJ_1 • • Type PMEG2015EH added Table 6 Ptot values for PMEG2015EJ amended 20050302 Product data sheet - 9397 750 14916 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 7 April 2005 7 of 9 PMEG2015EH; PMEG2015EJ Philips Semiconductors 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers 12. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 13. Definitions 14. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 15. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 14916 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 7 April 2005 8 of 9 Philips Semiconductors PMEG2015EH; PMEG2015EJ 20 V, 1.5 A very low VF MEGA Schottky barrier rectifiers 16. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 2 3 3 5 5 5 7 8 8 8 8 © Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 7 April 2005 Document number: 9397 750 14916 Published in The Netherlands