PMEG3002TV 0.2 A very low VF MEGA Schottky barrier dual rectifier in SOT666 package Rev. 01 — 21 October 2005 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier dual rectifier with an integrated guard ring for stress protection, encapsulated in a SOT666 ultra small and flat lead Surface Mounted Device (SMD) plastic package. Table 1: Product overview Type number PMEG3002TV Package Configuration Philips JEITA SOT666 - dual isolated 1.2 Features ■ ■ ■ ■ Forward current: ≤ 0.2 A Reverse voltage: ≤ 30 V Very low forward voltage Ultra small and flat lead SMD plastic package 1.3 Applications ■ ■ ■ ■ ■ Low voltage rectification High efficiency DC-to-DC conversion Switch mode power supply Inverse polarity protection Low power consumption applications 1.4 Quick reference data Table 2: Symbol Quick reference data Parameter Conditions IF forward current Tamb ≤ 25 °C [1] VR reverse voltage IF = 200 mA [2] Min Typ Max Unit - - 0.2 A - - 30 V - 420 480 mV Per diode VF forward voltage [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Pulse test: tp ≤ 300 µs; δ ≤ 0.02. PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 2. Pinning information Table 3: Pinning Pin Description 1 anode (diode 1) 2 not connected 3 cathode (diode 2) 4 anode (diode 2) 5 not connected 6 Simplified outline cathode (diode 1) 6 5 4 1 2 3 Symbol 6 5 4 1 2 3 006aaa440 3. Ordering information Table 4: Ordering information Type number PMEG3002TV Package Name Description Version - plastic surface mounted package; 6 leads SOT666 4. Marking Table 5: Marking codes Type number Marking code PMEG3002TV 2M PMEG3002TV_1 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 2 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit - 30 V - 0.2 A Per diode VR reverse voltage IF forward current Tamb ≤ 25 °C IFRM repetitive peak forward current tp ≤ 1 ms; δ ≤ 0.25 [1] - 1 A - 2.5 A IFSM non-repetitive peak forward current square wave; tp = 8 ms [1] Ptot total power dissipation Tamb ≤ 25 °C [1] - 200 mW [2] - 300 mW [1] - 300 mW [2] - 400 mW Per device total power dissipation Ptot Tamb ≤ 25 °C Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C Tstg storage temperature −65 +150 °C [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. 6. Thermal characteristics Table 7: Thermal characteristics Symbol Parameter Conditions thermal resistance from junction to ambient in free air Min Typ Max Unit [1] [2] - - 416 K/W [1] [3] - - 318 K/W [4] - - 195 K/W Per device Rth(j-a) Rth(j-sp) thermal resistance from junction to solder point [1] For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating are available on request. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. [4] Soldering point of cathode tab. PMEG3002TV_1 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 3 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 7. Characteristics Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit IF = 0.1 mA - 130 190 mV IF = 1 mA - 190 250 mV IF = 10 mA - 255 300 mV IF = 100 mA - 355 400 mV IF = 200 mA - 420 480 mV VR = 10 V - 3 10 µA VR = 30 V - 10 30 µA Per diode VF IR Cd [1] [1] forward voltage reverse current diode capacitance VR = 10 V; Tamb = 100 °C - 400 - µA VR = 1 V; f = 1 MHz - 20 25 pF Pulse test: tp ≤ 300 µs; δ ≤ 0.02. PMEG3002TV_1 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 4 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 006aaa660 103 IR (µA) IF (mA) 102 006aaa661 104 (1) 103 (2) 102 (3) (1) 10 (2) 10 (4) 1 10−1 (3) (4) (5) 10−2 1 (5) 10−3 10−1 10−4 0 0.2 0.4 0.6 0 5 10 VF (V) (1) Tamb = 125 °C (1) Tamb = 125 °C (2) Tamb = 100 °C (2) Tamb = 100 °C (3) Tamb = 85 °C (3) Tamb = 85 °C (4) Tamb = 25 °C (4) Tamb = 25 °C (5) Tamb = −40 °C (5) Tamb = −40 °C Fig 1. Forward current as a function of forward voltage; typical values 15 20 25 30 VR (V) Fig 2. Reverse current as a function of reverse voltage; typical values 001aaa353 40 Cd (pF) 30 20 10 0 0 10 20 30 VR (V) Tamb = 25 °C; f = 1 MHz Fig 3. Diode capacitance as a function of reverse voltage; typical values PMEG3002TV_1 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 5 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 8. Package outline 1.7 1.5 6 0.6 0.5 5 4 0.3 0.1 1.7 1.5 1.3 1.1 pin 1 index 1 2 3 0.18 0.08 0.27 0.17 0.5 1 Dimensions in mm 04-11-08 Fig 4. Package outline SOT666 9. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package PMEG3002TV SOT666 [1] Description 4000 8000 2 mm pitch, 8 mm tape and reel - -315 4 mm pitch, 8 mm tape and reel -115 - For further information and the availability of packing methods, see Section 16. PMEG3002TV_1 Product data sheet Packing quantity © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 6 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 10. Soldering 2.75 2.45 2.10 1.60 0.15 (4x) solder lands 0.40 (6x) 0.075 solder resist 0.55 2.00 1.70 1.00 (2x) 0.30 (2x) placement area 0.375 (4x) occupied area 1.20 2.20 2.50 mgx367 Reflow soldering is the only recommended soldering method. Dimensions in mm Fig 5. Reflow soldering footprint SOT666 PMEG3002TV_1 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 7 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 11. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PMEG3002TV_1 20051021 Product data sheet - - - PMEG3002TV_1 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 8 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 12. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 13. Definitions customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 15. Trademarks 14. Disclaimers Notice — All referenced brands, product names, service names and trademarks are the property of their respective owners. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 16. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] PMEG3002TV_1 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 — 21 October 2005 9 of 10 PMEG3002TV Philips Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 17. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 3 4 6 6 7 8 9 9 9 9 9 © Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 21 October 2005 Document number: PMEG3002TV_1 Published in The Netherlands