PHILIPS PESD3V3V4UW

PESDxV4UF; PESDxV4UG;
PESDxV4UW
Very low capacitance unidirectional quadruple ESD
protection diode arrays
Rev. 03 — 28 January 2008
Product data sheet
1. Product profile
1.1 General description
Very low capacitance unidirectional quadruple ElectroStatic Discharge (ESD) protection
diode arrays in small Surface-Mounted Device (SMD) plastic packages designed to
protect up to four signal lines from the damage caused by ESD and other transients.
Table 1.
Product overview
Type number
Package
Package configuration
NXP
JEITA
JEDEC
PESD3V3V4UF
SOT886
-
MO-252
leadless ultra small
PESD5V0V4UF
SOT886
-
MO-252
leadless ultra small
PESD3V3V4UG
SOT353
SC-88A
-
very small
PESD5V0V4UG
SOT353
SC-88A
-
very small
PESD3V3V4UW
SOT665
-
-
ultra small and flat lead
PESD5V0V4UW
SOT665
-
-
ultra small and flat lead
1.2 Features
n
n
n
n
ESD protection of up to four lines
Very low diode capacitance
Max. peak pulse power: PPP = 16 W
Low clamping voltage: VCL = 11 V
n
n
n
n
Ultra low leakage current: IRM = 25 nA
ESD protection up to 12 kV
IEC 61000-4-2; level 4 (ESD)
IEC 61000-4-5 (surge); IPP = 1.5 A
1.3 Applications
n Computers and peripherals
n Audio and video equipment
n Cellular handsets and accessories
n Communication systems
n Portable electronics
n Subscriber Identity Module (SIM) card
protection
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
1.4 Quick reference data
Table 2.
Quick reference data
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
-
-
3.3
V
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
-
-
5.0
V
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
-
15
18
pF
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
-
12
15
pF
Per diode
VRWM
Cd
reverse standoff voltage
diode capacitance
f = 1 MHz; VR = 0 V
2. Pinning information
Table 3.
Pinning
Pin
Description
Simplified outline
Symbol
PESD3V3V4UF; PESD5V0V4UF
1
cathode (diode 1)
2
common anode
3
1
2
3
1
6
cathode (diode 2)
2
5
4
cathode (diode 3)
3
4
5
common anode
6
cathode (diode 4)
6
5
bottom view
006aaa156
4
PESD3V3V4UG; PESD5V0V4UG
1
cathode (diode 1)
2
common anode
3
cathode (diode 2)
4
cathode (diode 3)
5
cathode (diode 4)
5
4
1
5
2
3
1
2
4
3
006aaa157
PESD3V3V4UW; PESD5V0V4UW
1
cathode (diode 1)
2
common anode
3
cathode (diode 2)
2
4
cathode (diode 3)
3
5
cathode (diode 4)
5
1
1
PESDXV4UF_G_W_3
Product data sheet
4
2
3
5
4
006aaa157
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
2 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
3. Ordering information
Table 4.
Ordering information
Type number
PESD3V3V4UF
Package
Name
Description
Version
XSON6
plastic extremely thin small outline package;
no leads; 6 terminals; body 1 × 1.45 × 0.5 mm
SOT886
SC-88A
plastic surface-mounted package; 5 leads
SOT353
plastic surface-mounted package; 5 leads
SOT665
PESD5V0V4UF
PESD3V3V4UG
PESD5V0V4UG
PESD3V3V4UW PESD5V0V4UW
4. Marking
Table 5.
Marking codes
Type number
Marking code[1]
PESD3V3V4UF
A7
PESD5V0V4UF
A8
PESD3V3V4UG
V1*
PESD5V0V4UG
V2*
PESD3V3V4UW
W1
PESD5V0V4UW
W2
[1]
* = -: made in Hong Kong
* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China
5. Limiting values
Table 6.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
PPP
peak pulse power
tp = 8/20 µs
IPP
peak pulse current
tp = 8/20 µs
Min
Max
Unit
[1][2][3]
-
16
W
[1][2][3]
-
1.5
A
Per diode
Per device
Tj
junction temperature
-
150
°C
Tamb
ambient temperature
−65
+150
°C
Tstg
storage temperature
−65
+150
°C
[1]
Non-repetitive current pulse 8/20 µs exponential decay waveform according to IEC 61000-4-5.
[2]
For PESDxV4UF measured from pin 1, 3, 4 or 6 to pin 2 or 5.
[3]
For PESDxV4UG and PESDxV4UW measured from pin 1, 3, 4 or 5 to pin 2.
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
3 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
Table 7.
ESD maximum ratings
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
electrostatic discharge voltage
IEC 61000-4-2
(contact discharge)
Min
Max
Unit
-
12
kV
-
10
kV
Per diode
VESD
[1][2][3]
MIL-STD-883 (human
body model)
[1]
Device stressed with ten non-repetitive ESD pulses.
[2]
For PESDxV4UF measured from pin 1, 3, 4 or 6 to pin 2 or 5.
[3]
For PESDxV4UG and PESDxV4UW measured from pin 1, 3, 4 or 5 to pin 2.
Table 8.
ESD standards compliance
Standard
Conditions
Per diode
IEC 61000-4-2; level 4 (ESD)
> 8 kV (contact)
MIL-STD-883; class 3 (human body model)
> 4 kV
001aaa631
001aaa630
120
IPP
100 %
90 %
100 % IPP; 8 µs
IPP
(%)
80
e−t
50 % IPP; 20 µs
40
10 %
t
tr = 0.7 ns to 1 ns
0
0
10
20
30
30 ns
40
t (µs)
Fig 1. 8/20 µs pulse waveform according to
IEC 61000-4-5
60 ns
Fig 2. ESD pulse waveform according to
IEC 61000-4-2
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
4 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
6. Characteristics
Table 9.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
-
-
3.3
V
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
-
-
5.0
V
Per diode
VRWM
IRM
VBR
Cd
reverse standoff voltage
reverse leakage current
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
VRWM = 3.3 V
-
40
300
nA
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
VRWM = 5.0 V
-
3
25
nA
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
5.3
5.6
5.9
V
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
6.4
6.8
7.2
V
breakdown voltage
diode capacitance
IR = 1 mA
f = 1 MHz
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
VR = 0 V
-
15
18
pF
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
VR = 3.3 V
-
9
12
pF
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
VR = 0 V
-
12
15
pF
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
VR = 5 V
-
6
9
pF
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
5 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
Table 9.
Characteristics …continued
Tamb = 25 °C unless otherwise specified.
Symbol Parameter
VCL
Conditions
clamping voltage
rdif
Min
Typ
Max
Unit
[1][2][3]
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
IPP = 1 A
-
-
9
V
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
IPP = 2 A
-
-
11
V
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
IPP = 1 A
-
-
11
V
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
IPP = 1.7 A
-
-
13
V
differential resistance
IR = 1 mA
PESD3V3V4UF
PESD3V3V4UG
PESD3V3V4UW
-
-
200
Ω
PESD5V0V4UF
PESD5V0V4UG
PESD5V0V4UW
-
-
100
Ω
[1]
Non-repetitive current pulse 8/20 µs exponential decay waveform according to IEC 61000-4-5.
[2]
For PESDxV4UF measured from pin 1, 3, 4 or 6 to pin 2 or 5.
[3]
For PESDxV4UG and PESDxV4UW measured from pin 1, 3, 4 or 5 to pin 2.
006aaa261
102
001aaa633
1.2
PPP
PPP(25°C)
PPP
(W)
0.8
10
0.4
1
1
10
102
103
104
0
0
tp (µs)
50
100
150
200
Tj (°C)
Tamb = 25 °C
Fig 3. Peak pulse power as a function of exponential
pulse duration; typical values
Fig 4. Relative variation of peak pulse power as a
function of junction temperature; typical values
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
6 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
006aaa262
16
006aaa263
10
Cd
(pF)
IRM
14
IRM(25 °C)
12
1
(1)
10
(2)
8
10−1
−100
6
0
1
2
3
4
5
−50
0
50
100
150
Tj (°C)
VR (V)
f = 1 MHz; Tamb = 25 °C
(1) PESD3V3V4UF; PESD3V3V4UG; PESD3V3V4UW
(2) PESD5V0V4UF; PESD5V0V4UG; PESD5V0V4UW
Fig 5. Diode capacitance as a function of reverse
voltage; typical values
Fig 6. Relative variation of reverse leakage current as
a function of junction temperature; typical
values
I
−VCL −VBR −VRWM
V
−IRM
−IR
−
+
P-N
−IPP
006aaa407
Fig 7. V-I characteristics for a unidirectional ESD protection diode
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
7 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
ESD TESTER
RZ
450 Ω
CZ
IEC 61000-4-2 network
CZ = 150 pF; RZ = 330 Ω
RG 223/U
50 Ω coax
4 GHz DIGITAL
OSCILLOSCOPE
10×
ATTENUATOR
50 Ω
DUT
Device
Under
Test
vertical scale = 200 V/div
horizontal scale = 50 ns/div
vertical scale = 5 V/div
horizontal scale = 50 ns/div
PESD3V3V4UF/G/W
GND
PESD5V0V4UF/G/W
GND
GND
unclamped +1 kV ESD voltage waveform
(IEC 61000-4-2 network)
clamped +1 kV ESD voltage waveform
(IEC 61000-4-2 network)
GND
GND
vertical scale = 200 V/div
horizontal scale = 50 ns/div
unclamped −1 kV ESD voltage waveform
(IEC 61000-4-2 network)
vertical scale = 5 V/div
horizontal scale = 50 ns/div
clamped −1 kV ESD voltage waveform
(IEC 61000-4-2 network)
006aab125
Fig 8. ESD clamping test setup and waveforms
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
8 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
7. Application information
The devices are designed for the protection of up to four unidirectional data or signal lines
from the damage caused by ESD and surge pulses. The devices may be used on lines
where the signal polarities are both, positive and negative with respect to ground. The
devices provide a surge capability of 16 W per line for an 8/20 µs waveform each.
data- or transmission lines
DUT
1
DUT
5
5
n.c. 2
2
3
1
4
unidirectional protection of 4 lines
3
4
bidirectional protection of 3 lines
006aab126
Fig 9. Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.
2. The path length between the device and the protected line should be minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
9 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
8. Package outline
0.50
max
1.05
0.95
2.2
1.8
0.04
max
0.6
3
4
2
5
1
6
0.40
0.32
0.35
0.27
5
0.45
0.15
4
0.25
0.17
0.5
1.5
1.4
1.1
0.8
2.2 1.35
2.0 1.15
0.5
1
2
3
0.3
0.2
0.65
0.25
0.10
1.3
Dimensions in mm
04-07-22
Dimensions in mm
Fig 10. Package outline PESDxV4UF (SOT886)
04-11-16
Fig 11. Package outline PESDxV4UG (SOT353)
1.7
1.5
0.6
0.5
5
4
0.3
0.1
1.7
1.5
1.3
1.1
1
2
3
0.27
0.17
0.5
0.18
0.08
1
Dimensions in mm
04-11-08
Fig 12. Package outline PESDxV4UW (SOT665)
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
10 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
9. Packing information
Table 10. Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
PESD3V3V4UF
PESD5V0V4UF
PESD3V3V4UG
PESD5V0V4UG
Package
SOT886
SOT886
SOT353
SOT353
PESD3V3V4UW SOT665
PESD5V0V4UW SOT665
Description
Packing quantity
3000
4000
5000
8000
10000
4 mm pitch, 8 mm tape and reel; T1
[2]
-
-
-115
-
-
4 mm pitch, 8 mm tape and reel; T4
[3]
-
-
-132
-
-
4 mm pitch, 8 mm tape and reel; T1
[2]
-
-
-115
-
-
4 mm pitch, 8 mm tape and reel; T4
[3]
-
-
-132
-
-
4 mm pitch, 8 mm tape and reel; T1
[2]
-115
-
-
-
-135
4 mm pitch, 8 mm tape and reel; T2
[4]
-125
-
-
-
-165
4 mm pitch, 8 mm tape and reel; T1
[2]
-115
-
-
-
-135
4 mm pitch, 8 mm tape and reel; T2
[4]
-125
-
-
-
-165
2 mm pitch, 8 mm tape and reel
-
-
-
-315
-
4 mm pitch, 8 mm tape and reel
-
-115
-
-
-
2 mm pitch, 8 mm tape and reel
-
-
-
-315
-
4 mm pitch, 8 mm tape and reel
-
-115
-
-
-
[1]
For further information and the availability of packing methods, see Section 13.
[2]
T1: normal taping
[3]
T4: 90° rotated reverse taping
[4]
T2: reverse taping
10. Soldering
1.250
0.675
0.370
(6×)
0.500
1.700
solder lands
0.500
solder paste
0.270
(6×)
occupied area
Dimensions in mm
0.325
(6×)
0.425
(6×)
sot886_fr
Reflow soldering is the only recommended soldering method.
Fig 13. Reflow soldering footprint PESDxV4UF (SOT886)
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
11 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
2.65
0.60
(1×)
0.40 0.90 2.10
2.35
0.50
(4×)
solder lands
0.50
(4×)
solder paste
1.20
solder resist
2.40
occupied area
Dimensions in mm
sot353_fr
Fig 14. Reflow soldering footprint PESDxV4UG (SOT353/SC-88A)
2.25
2.65
0.30 1.00 4.00
4.50 2.70 0.70
solder lands
1.15
3.75
solder resist
transport direction during soldering
occupied area
Dimensions in mm
Fig 15. Wave soldering footprint PESDxV4UG (SOT353/SC-88A)
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
12 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
2.45
2.10
1.60
0.15
(2x)
0.70
(2×)
0.40
(5×)
0.45
(2×)
2.00 1.70 1.00
0.30
0.55
0.375
(2×)
1.25
1.375
1.20
2.20
solder lands
placement area
solder resist
occupied area
0.075
Dimensions in mm
Reflow soldering is the only recommended soldering method.
Fig 16. Reflow soldering footprint PESDxV4UW (SOT665)
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
13 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
11. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PESDXV4UF_G_W_3
20080128
Product data sheet
-
PESDXV4UG_SER_2
PESDXV4UW_SER_1
Modifications:
•
The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
•
•
•
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Type numbers PESD3V3V4UF and PESD5V0V4UF added
Table 1 “Product overview”: added
Figure 7: added
Section 9 “Packing information”: added
Section 10 “Soldering”: added
Section 12 “Legal information”: updated
PESDXV4UG_SER_2
20050407
Product data sheet
-
PESDXV4UG_SER_1
PESDXV4UW_SER_1
20050422
Product data sheet
-
-
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
14 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
12.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
13. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
PESDXV4UF_G_W_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 28 January 2008
15 of 16
PESDxV4UF/G/W
NXP Semiconductors
Very low capacitance quadruple ESD protection diode arrays
14. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data. . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 3
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Application information. . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Packing information. . . . . . . . . . . . . . . . . . . . . 11
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 14
Legal information. . . . . . . . . . . . . . . . . . . . . . . 15
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 15
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Contact information. . . . . . . . . . . . . . . . . . . . . 15
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2008.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 28 January 2008
Document identifier: PESDXV4UF_G_W_3