INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT4518 Dual synchronous BCD counter Product specification File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification Dual synchronous BCD counter 74HC/HCT4518 all four bit positions (nQ0 to nQ3) and an active HIGH overriding asynchronous master reset input (nMR). FEATURES • Output capability: standard The counter advances on either the LOW-to-HIGH transition of nCP0 if nCP1 is HIGH or the HIGH-to-LOW transition of nCP1 if nCP0 is LOW. Either nCP0 or nCP1 may be used as the clock input to the counter and the other clock input may be used as a clock enable input. A HIGH on nMR resets the counter (nQ0 to nQ3 = LOW) independent of nCP0 and nCP1. • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT4518 are high-speed Si-gate CMOS devices and are pin compatible with the “4518” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. APPLICATIONS The 74HC/HCT4518 are dual 4-bit internally synchronous BCD counters with an active HIGH clock input (nCP0) and an active LOW clock input (nCP1), buffered outputs from • Multistage synchronous counting • Multistage asynchronous counting • Frequency dividers QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC CL = 15 pF; VCC = 5 V HCT tPHL/ tPLH propagation delay nCP0, nCP1 to nQn 20 24 ns tPHL propagation delay nMR to nQn 13 14 ns fmax maximum clock frequency 61 55 MHz CI input capacitance 3.5 3.5 pF CPD power dissipation capacitance per counter 29 27 pF notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in µW): PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where: fi = input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC2 × fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC − 1.5 V ORDERING INFORMATION See “74HC/HCT/HCU/HCMOS Logic Package Information”. December 1990 2 Philips Semiconductors Product specification Dual synchronous BCD counter 74HC/HCT4518 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 9 1CP0, 2CP0 clock inputs (LOW-to-HIGH, edge-triggered) 2, 10 1CP1, 2CP1 clock inputs (HIGH-to-LOW, edge-triggered) 3, 4, 5, 6 1Q0 to 1Q3 data outputs 7, 15 1MR, 2MR asynchronous master reset inputs (active HIGH) 8 GND ground (0 V) 11, 12, 13, 14 2Q0 to 2Q3 data outputs 16 VCC positive supply voltage Fig.1 Pin configuration. December 1990 Fig.2 Logic symbol. 3 Fig.3 IEC logic symbol. Philips Semiconductors Product specification Dual synchronous BCD counter 74HC/HCT4518 FUNCTION TABLE nCP0 nCP1 MR MODE ↑ H L counter advances L ↓ L counter advances ↓ X L no change X ↑ L no change ↑ L L no change H ↓ L no change X X H Q0 to Q3 = LOW Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care ↑ = LOW-to-HIGH clock transition ↓ = HIGH-to-LOW clock transition Fig.4 Functional diagram. Fig.5 Logic diagram (one counter). Fig.6 Timing diagram. December 1990 4 Philips Semiconductors Product specification Dual synchronous BCD counter 74HC/HCT4518 DC CHARACTERISTICS FOR 74HC For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (°C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 −40 to +85 min. typ. max. min. max. −40 to +125 min. UNIT VCC (V) WAVEFORMS max. tPHL/ tPLH propagation delay nCP0, nCP1 to nQn 66 24 19 210 42 36 265 53 45 315 63 59 ns 2.0 4.5 6.0 Fig.9 tPHL propagation delay nMR to nQn 44 16 13 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.8 tTHL/ tTLH output transition time 19 7 6 75 15 13 95 19 16 110 22 19 ns 2.0 4.5 6.0 Fig.9 tW clock pulse width HIGH or LOW tW 25 9 7 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.8 master reset pulse width 120 HIGH 24 20 39 14 11 150 30 26 180 36 31 ns 2.0 4.5 6.0 Fig.8 trem removal time nMR to nCP0, nCP1 0 0 0 −22 −8 −6 0 0 0 0 0 0 ns 2.0 4.5 6.0 Fig.8 tsu set-up time nCP1 to nCP0; nCP0 to nCP1 80 16 14 22 8 6 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.7 fmax maximum clock pulse frequency nCP0, nCP1 6.0 30 35 18 55 66 4.8 24 28 4.0 20 24 MHz 2.0 4.5 6.0 Fig.8 December 1990 80 16 14 5 Philips Semiconductors Product specification Dual synchronous BCD counter 74HC/HCT4518 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (∆ICC) for a unit load of 1 is given in the family specifications. To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT nCP0, nCP1 nMR 0.80 1.50 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (°C) TEST CONDITIONS 74HCT SYMBOL PARAMETER +25 −40 to +85 min. typ. max. min. max. −40 to +125 min. UNIT V CC (V) WAVEFORMS max. tPHL/ tPLH propagation delay nCP0, nCP1 to nQn 28 53 66 80 ns 4.5 Fig.9 tPHL propagation delay nMR to nQn 17 35 44 53 ns 4.5 Fig.8 tTHL/ tTLH output transition time 7 15 19 22 ns 4.5 Fig.9 tW clock pulse width HIGH or LOW 20 11 25 30 ns 4.5 Fig.8 tW master reset pulse width HIGH 20 11 25 30 ns 4.5 Fig.8 trem removal time nMR to nCP0, nCP1 0 −11 0 0 ns 4.5 Fig.8 tsu set-up time nCP1 to nCP0; nCP0 to nCP1 16 5 20 24 ns 4.5 Fig.7 fmax maximum clock pulse frequency nCP0, nCP1 25 50 20 17 MHz 4.5 Fig.8 December 1990 6 Philips Semiconductors Product specification Dual synchronous BCD counter 74HC/HCT4518 AC WAVEFORMS (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.7 Waveforms showing hold and set-up times for nCP0 to nCP1 and nCP1 to nCP0. Conditions: nCP1 = HIGH while nCP0 is triggered on a LOW-to-HIGH transition and nCP0 = LOW, while nCP1 is triggered on a HIGH-to-LOW transition. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.8 Waveforms showing the minimum pulse widths for nCP0, nCP1 and nMR inputs; the removal time for nMR and the propagation delay for nMR to nQn outputs and the maximum clock pulse frequency. Conditions: nCP1 = HIGH while nCP0 is triggered on a LOW-to-HIGH transition and nCP0 = LOW, while nCP1 is triggered on a HIGH-to-LOW transition. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.9 Waveforms showing the propagation delays for nCP0, nCP1 to nQn outputs and the output transition times. PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. December 1990 7