Fiber Optics SMCTM S, M, L, XL Connector SMCTM Adapter V23834-L6-Ex 1) Features S, M, L, XL Connector • Ultra-flat connector housing • Spring loaded ferrule in the direction of the optical axis • Reliable two-sided ESCON® -like latching mechanism • Uniform pressure of connector endface to mated device • Integrated mechanical keying to orient relative position between mated parts • Prealignment (lateral guidance) of the connector housing when mating in an adapter or a receptacle • Pins for optical alignment precision • Endface polish guarantees fiber physical contact • SMC adapter and module receptacle available S Connector • Extreme short connector housing • SMC S without strain relief for ribbons, no boot M Connector • SMC M without strain relief for ribbons or ribbons with jacket, no boot L, XL Connector • SMC L without strain relief function, with boot • SMC XL with strain relief for ribbon cable termination Adapter • Singlemode and multimode applications • 1-to-1 / 1-to-12 coding • Optional metal EMI shield with small cutout/retaining clip • Snap-in and/or screw mounting • Both adapter halfs riveted • Design allows adapter stackability S M L, XL Adapter 1) For ordering information see next page SMC™ is a trademark of Infineon Technologies; PAROLI® is a registered trademark of Infineon Technologies ESCON® is a registered trademark of IBM Data Sheet 1 2001-10-01 V23834-L6-Ex Description Description Ordering Information Part Number Connector Kit (without ferrule) V23834-L6-E5/E6 SMC S (f)/(m)1) V23834-L6-E3/E4 SMC M (f)/(m)1) V23834-L6-E1/E2 SMC XL (f)/(m)1) Jumper Type V23867-C6073-+yyy1) SMC S (f) - SMC S (f) (with blank ribbon)1) V23867-C6074-+yyy1) SMC M (f) - SMC M (f) (with blank ribbon)1) V23867-Cxx34-+yyy1) SMC XL (f) - SMC XL (f) (with cable)1) Adapter Type V23867-Z9999-W900 Simplex, black, 1 to 1, with plate V23867-Z9999-W904 Simplex, black, 1 to 1, without plate Other configurations on request 1) (f): female; (m): male; xx: cable code; +yyy: length code. Connectors The connector type SMC is an optical multifiber connector which is characterized by a standardized MT ferrule interface (fiber pitch is 250 µm) for up to 12 fibers. It was developed by Siemens/Infineon and specially designed for the PAROLI® module port. The connector is now part of a whole SMC product family to be applied for a variety of state-of-the-art and future optical network technologies. The MT ferrule characteristics meet the requirements of the standards IEC 60874-16 and IEC 61754-5. Work is in progress to define a fiber optical connector intermateability standard for the SMC (FOCIS-14, Ref. no. SP-4834, to be TIA/EIA-604-14). Adapter The SMC adapter is part of the SMC optical connector family. It serves to connect mechanically two SMC connector plugs with up to 12 fibers applied for a variety of stateof-the-art and future optical network technologies. Data Sheet 2 2001-10-01 V23834-L6-Ex Technical Data Technical Data Absolute Maximum Ratings Parameter Symbol Limit Values min. max. Operating Temperature –20 70 Storage/Shipping Temperature –40 70 Unit °C Connectors Parameter Limit Values min. typ. max. IL/per fiber, MM 1) ≤ 0.2 0.75 CL/per fiber, SM 2) ≤ 0.3 0.75 RL/per fiber, SM 3) Unit dB 50 Durability/Matings 1000 times Repeatability ≤ 0.2 ∆dB Cable Retention Force XL 100 N Insertion Force S, M, L XL 13 18 18 30 Withdrawal Force 4 7 Flammability Class UL94 V-1 Connector Dimensions see Figure 1, Figure 2, Figure 3 mm Ferrule Dimensions 8.0 x 6.4 x 2.45 Ferrule Endface flat or angled polished (SM) Housing Color 1) 2) 3) black or beige Insertion Loss, multimode. Connection Loss, singlemode, preliminary. Return Loss, singlemode, preliminary. Data Sheet 3 2001-10-01 V23834-L6-Ex Materials Adapter Parameter Limit Values Attenuation (connector to connector) Unit typ. max. ≤ 0.15 0.75 dB 1000 times Durability/Matings Repeatability ≤ 0.2 dB Latch Retention Force (coupling strength) 80 N EMI effective cutout 7.5 x 3.5 Flammability Class 18 mm UL94 V-0 Physical Dimensions see Figure 4 Housing Color black or beige mm Materials Part Material Connectors Housing PBT Ferrule Mineral filled thermoset epoxy Spring Stainless steel Pin Pin Holder Strain relief clamp 1) Copper Boot 2) TPR, black Dust Cap Adapter Housing PPS Mounting plate Stainless steel Rivet DIN 7340 B3x0.25x4-Ms/nickel-plated (for M2.5 screw mounting) 1) 2) XL Connector only. L, XL Connector only. Data Sheet 4 2001-10-01 V23834-L6-Ex Application Note Application Note S Connector Reliable multiple-link and high-bandwidth on-board applications. M, L Connector Reliable multiple-link and high-bandwidth on-board and in-rack applications. XL Connector Reliable multiple-link and high-bandwidth in-rack, rack-to-rack and patch applications. Small interface for direct attach harness, fan-out routing and trunk cable connections. Platform of backplane connector and fabric computer clustering. S, M, L, XL Connector, Adapter Connector-adapter-connector and jumper configurations are compliant to commercial performance standards Bellcore GR-1435-CORE, IEC 60874-1 and EIA/TIA-455 FOTP requirements. Multimode applications qualified, singlemode applications are newly engineered. Data Sheet 5 2001-10-01 V23834-L6-Ex Package Outlines Package Outlines Dimensions in mm Figure 1 S Connector, Male Version Dimensions in mm Figure 2 Data Sheet M Connector, Female Version 6 2001-10-01 V23834-L6-Ex Package Outlines Dimensions in mm Figure 3 L, XL Connector, Female Version Dimensions in mm Figure 4 Data Sheet Adapter 7 2001-10-01 V23834-L6-Ex Revision History: 2001-10-01 DS0 Previous Version: Page Subjects (major changes since last revision) Document’s layout has been changed: 2002-Aug. For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://www.infineon.com. Edition 2001-10-01 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany © Infineon Technologies AG 2002. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life-support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.