MSO Series 5V 9x14mm Surface Mount Crystal Clock Oscillators TTL/CMOS Compatible Anti-Static Tube or Tape & Reel Packaging 1.5 to 40 MHz Frequency Range 40/60% Symmetry Standard 45/55% Symmetry Available ±100ppm Stability Standard ±50ppm Stability Available Enable Disable Standard Not Recommended for New Designs. Refer to CMO5 Series as an Alternative. E L E C T R I C A L S P E C I F I C AT I O N S MODEL MSO5 MSO Frequency Range (MHz) 1.5 to 40 Frequency Stability (ppm) Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±100 ±50 -40°C to +85°C ±100 N/A OBSOLETE Temperature Range (°C) Operating -40°C to +85°C Storage -55°C to +125°C Supply Voltage (V) +5.0 ±10% Voltage Stability (ppm) ±3 Input Current (mA) 1.5MHz to 20MHz <17 > 20MHz <26 Symmetry (%) TTL/CMOS 40/60 TR and TF (ns) <5 Load 10TTL/CMOS Compatible “0” Level (VOL) “1” Level (VOH) Start up Time (ms) 0.5V max. @ IOL = 16mA VCC-0.4V min. @ IOH = -1mA <5 PA R T N U M B E R I N G G U I D E MSOXXXE - Specify Frequency “Blank” =0oC to 70oC Operating Temperature “M” = -40oC to 85oC Operating Temperature “Blank” = 40/60% Symmetry “S” = 45/55% Symmetry “Blank” = ±100ppm Stability “5” = ±50ppm Stability 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 800-888-1499 or www.champtech.com 1 MSO Series 5V 9x14mm Surface Mount Crystal Clock Oscillators PIN TAPE & REEL SPECIFICATIONS Tape & Reel Shipping Tape Size: 24mm Material: Black PVC, Conductive .012 thick Shipping Reel Size: 13 diameter Material: Plastic FUNCTION 1 Enable/Disable 2 Ground 3 Output 4 + VCC SHIPPING TUBE CROSS SECTION 13 Reel Tape Length 16.5 yds Max. No. of Pockets:750 Leader Length: 16 min. Trailer Length: 14 min. Q.C. Sample Quantity: 10 pcs. Product/Reel: 500 Cover Tape Thickness: .002 Cover Peel Strength: 75g Note: Minimum Order is 500 OBSOLETE OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 800-888-1499 or www.champtech.com 2