Series 612 / 614 Pin grid array sockets Carrier types 84 Pin grid array sockets, carrier types PGA carrier sockets are high density connecting devices having a disposable plastic body equipped with carrier pins. Machined precision contacts with soft contact clips assuring low insertion/withdrawal forces are plugged-on. Over 200 standard pinouts are available; inquiries for custom varieties are welcome Insertion characteristics: 6 finger low force or 3 finger low force for part number termination 012 Platings 13 91 93 97 99 Sleeve 0.25 µm Au 5.0 µm Sn Pb 5.0 µm Sn Pb 5.0 µm Sn Pb 5.0 µm Sn Pb Clip 0.75 µm Au 0.25 µm Au 0.75 µm Au Goldflash 5.0 µm Sn Pb Pin Ordering information Replace xxx-xx-xxx with the number of poles, body size and layout numbers as indicated on pages 88 to 92. For example, a 12×12 pin configuration with window and 108 standard soldering contacts as shown on page 88 becomes: 612-93-108-12-051-001. 612-13-xxx-xx-xxx-101 B 612-91-xxx-xx-xxx-101 612-93-xxx-xx-xxx-101 612-97-xxx-xx-xxx-101 612-99-xxx-xx-xxx-101 614-13-xxx-xx-xxx-101 B 614-91-xxx-xx-xxx-101 614-93-xxx-xx-xxx-101 614-97-xxx-xx-xxx-101 614-99-xxx-xx-xxx-101 PGA carrier sockets with disposable plastic body and carrier pins. Standard contacts are pluggedon Solder terminations ∅ 0.53 mm, length 3.2 mm PGA carrier sockets with disposable plastic body and carrier pins. Low profile contacts are pluggedon Solder terminations ∅ 1.37 mm, total length of contact 4.2 mm Requires ∅ 1.4 mm holes in PCB 614-13-xxx-xx-xxx-112 B 614-91-xxx-xx-xxx-112 614-93-xxx-xx-xxx-112 614-97-xxx-xx-xxx-112 614-99-xxx-xx-xxx-112 PGA carrier sockets with disposable plastic body and carrier pins. Low profile ultra thin contacts are plugged-on Solder terminations ∅ 0.98 mm, total length of contact 3.5 mm Requires ∅ 1 mm holes in PCB B Products not available from stock. Please consult PRECI-DIP.