L U M IN IS PRISMA NOVA 22 Ceiling mount 1 Ceiling pendant with a clear acrylic prismatic diffuser or semi specular anodized aluminum reflector. An array of optional attachments and accessories are available to customize, and adapt each luminaire to particular design scheme and lighting concept. Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. - Pulse rated porcelain socket or 75W/600V thermoplastic compact fluorescent socket. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. 2 3 1- Heavy duty hang straight swivel, with 4 1/2” dia. (115) canopy and universal mounting plate. 2- 5/8” Dia.(16) X36” lg. (900) suspension stem. Precut factory stems are available on request (Specify option STM with desired length). (Options STM60 & STM80 for longer stems.) 3- Aluminum removable top disc cover for quick maintenance. 4- Extruded aluminum ballast housing module with a fine linear stria pattern. 5- Set of four 3/8” dia. (95) struts. 6- Aluminum lens support ring 7- PR2220: Clear acrylic prismatic diffuser. PR2221: Semi specular anodized aluminum reflector. Alternate reflector finish (Options RP8) 4 5 7 PR2221 Semi specular aluminum reflector. All other parts of luminaire are painted as per specified color. 6 PR2220 PR2220 . PR2221 Specification Photometry Options 36” (900) 90 PR2221 PR2220 23” (584) 60 30 Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. 24” (610) Certification Mounting. UL. Indoor use. (CE certification on request) Model# Max. weight: 17 lbs.(7.6). Installation: Mounts over a standard 4”(100) octagonal box with 3 1/2” (89) c/c mounting holes. Light source selection CF (Gx24q) Single lamp Two lamps F157 F170 F185 F1120 2G8-1 Base PR2220 PR2221 F232 F242 F257 F270 F285 F2120 MH (ED17) M150 M175 * * M175 Includes L21 full clear lens enclosure for enclosed rated lamps. Voltage Finish (Refer to color chart) 120 V Standard factory prewired Four lamps (If no voltage is specified) F432 For other voltages, please specify with F442 catalog number. F457 H.I.D. (ED17) F470 F485 120 V 6 to 8 lamps 277 V 347 V F632 Pulse start ballast: F642 Refer to page OP1 F657 COMP. FLUO. F842 Smart ballast 120/277 Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver Optional colors CS: Custom color RAL: RAL# color STC: STM60: STM80: STM: SW45: TA: TCB: TCW: SPB: SPW: W22: D22T: D22TM: L21: LB22: LB22M: BA22: BC22: RP8: DM1: DM2: DM3: DM4: DM5: DS1: DS2: EM42: 347 V (To specify) Refer to pages 16 .17 18 for details on listed options. M250 M400 ED28 (Mog. Base) ED37 (Mog. Base) (Lamps: By others) (Open rated lamps only. Except for 175MH) EM242: QRS: QS: Mounting Safety cable. 60”lg. (1525) Stem. 80”lg. (2030) Stem. Cut to size stem. 36” lg. stem with 45º hang straight swivel. 3/4” NPT stem adaptor. Black spiral power cord. White spiral power cord. 3/18 black straight power cord with aircraft cable. 3/18 white straight power cord with aircraft cable. Accessories Frosted prismatic diffuser. Clear prismatic conical lens. For 175w/MH. Clear flat bottom lens. Cross blades louver. For 175w/MH. Satin anodized band. Colored alum. band same as luminaire. Inside reflector semispecular. Outside reflector same as luminaire Electrical 1x26w / 1x32w / 1x42w 120V Dimming ballast. 2x26W 120V Dimming ballast. 2x32w / 2x42w 1X57 / 1X70W 120V Dimming ballast. 2x57W/70W 120V Dimming ballast. 4x57/ 70w 120V Dimming ballast. Dual switch 1 lamp. Dual switch 2 lamps. 1 lamp (26/32/42W) Integral Emergency battery back up. 2 lamp (26/32W) EM battery. Quartz restrike standby relay. Quartz lamp socket for external emergency power. Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 12 Web: www.luminis.com. Sept. 2006 Rev.Jan.2008 L U M IN I S OPTIONS Electrical controls Emergency battery back-up EM42 One lamp: EM242 HOT BLK WHT Two lamp: 26w: 450 Lmns.. 26w / 32w 32w: 575 Lmns. 750 Lmns. 42w: 750 Lmns. Time: 90 Mnts -120/277V / T 0º C EM Ballast wiring diagram for 120V factory connection. Note: *Unless otherwise specified, test switch and indicator light are installed with luminaires at all times. * Standard factory prewiring for Unswitched luminaire. AC ballast WHT If remote test switch is required, please add -S to option EM ballast Black/120V (Factory wired) Orange/277V (Cap unused lead.) COM Single pole test switch (Breaking the connection) Optional: luminaire wired for * EM42S Switched external wall switch control. * EM242S To be specified if required. Electronic dimming ballast Dimming specification For 57w & 70w: (Remote installation only) Consult factory Specifying option 120V 277V Note: Overall luminaire height will increase by 2” (50) to accommodate battery back-up Quartz lamp restrike Option: QRS Quartz restrike standby lamp kit. When power failure is restored, it will energize temporary Quartz lamp with progressive dimming until full H.I.D light output is produced. max.100w DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps. Pulse start ballast Quartz lamp emergency socket Option: QS Luminaires ballasts are wired for external switching control. Note: Add suffix PS to selected lamp wattage. Use of pulse start lamp and ballast combination requires a lens enclosure with the luminaire. Please check with compatible luminaire lens option. Quartz lamp socket for external 120V emergency power input. Separate 120V dedicated wiring is included. max.100 W DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps. Dual switching DS1 + - + Note: Some pulse start lamps may be available as protected lamp version to eliminate the lens enclosure. If required, please contact factory to verify availability and compatibility. DS2 + + + - DS1-26: DS2-26: DS1-42: DS2-42: DS1-70: DS2-70: DS1-120: DS2-120: DS2-642: DS2-842: DS2-657: + + + DS1: Luminaires with 2 lamps individually externally controlled. DS2: Luminaires with 4 lamps or more are externally controlled by set of 2 lamps.(for other lamp groupings, please consult factory) N0. of lamps DM1-120 DM1-277 1X26/32/42W DM2-120 DM2-277 2X26W 2DM2-120 2DM2-277 4X26W DM3-120 DM3-277 2X32/42W DM3-120 DM3-277 1X57/70W DM4-120 DM4-277 2X57/70W 2DM3-120 2DM3-277 4X32/42W 3DM3-120 3DM3-277 6X32/42W DM5-120 DM5-277 4X57/70W Standard dimming ballast MARK X 60HZ / EOL protection Dimming;5-100% Min. start. temp. 10ºC (50ºF) Burn lamps 100 hrs at full light output before dimming. DS2: Luminaire ballast housing length and stem size may be increased to accomodate required number of ballasts. Dual single lamp switching 26W Dual lamp switching by pair 2x26W Dual single lamp switching 32W or 42W Dual lamp switching by pair 2x32W or 2X42W Dual single lamp switching 57W or 70W Dual lamp switching by pair 2x57W or 2X70W Dual single lamp switching 85W or 120W Dual lamp switching by pair 2x85W or 2x120W Dual lamp switching by pair 2x32W or 2X42W Dual lamp switching by pair 2x32W or 2X42W Dual lamp switching by pair 2x57W or 2X70W Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 16 Web: www.luminis.com. Sept. 2006 Rev.Feb.2007 ng L U M IN I S Slope ceiling adaptor er to page 16 w/1x42w g ballast. w W g ballast. /42W) gency up. e . socket ower. AR115 AR117-AR119 AR121 only. 45º hang straight ball swivel for 5/8” dia. suspension stem. with adaptor plate for AR115 AR117 - AR119 - AR121 series SB45 Suspension power cord Stems can be cut on site and re-threaded externally (Tap size 1/4-18) 3/18 X 36”lg. power cord with adjustable aircraft cable. SPB Black power cable only with options EM42 / EM42S EM242 / EM242S QS / DS/ DS2 For other factory cut to size length add suffix -STM with desired length to catalog# max.120” 3/18 Spiral power cord Max. 277V Standard extended length: 3ft. Not applicable when using options EM42 / EM42S EM242 / EM242S QS / DS/ DS2 Ceiling surface mounting. Ceiling surface mount conversion kit. Mounts with a Standard 4” octagonal electrical box.(by others) Option: STC Option: Safety aircraft suspension cable, for applications with earthquake regulations. Cables extends 18” beyond canopy. (Secured to building structure) Conduit adaptor Luminous blue edge lens Option: 15” Dia. Kronos replacement LBL frosted lens with luminous blue clear edging. Frosted Cross guard ring Clear lens (Prisma Nova 12) L12: Clear lens (Prisma 12) L16: Clear lens (Prisma 16) L17: Clear lens (Prisma Nova 16) L21: Clear lens (Prisma Nova 24) L22: Clear lens (Prisma 24) Max. watts: C.F.L: 2x42w H.I.D: 100w CK16 Max. watts: C.F.L: 2x70w H.I.D: 100w 3/4” NPT Female Threaded adaptor (Electrical conduit and other support hardware by others) TA Frosted acrylic full lens enclosure. (Kronos KR series) L11: CK12 Option: Option: Clear or Frosted STM80 Option: TCW (White) TCB (Black) Safety suspension cable L18F: STM60 *STA36: 36” lg.X5/8” O.D. suspension stem. *STA60: 60” lg.X5/8” O.D. suspension stem. *STA80: 80” lg. X5/8” O.D. suspension stem. Spiral suspension power cord Option: SPW (White) SPB (Black) Note: cable size and type may change at factory discretion upon availability, to accomodate required wiring. Optional lens: Option * STA option for: Option: SB45 sion swivel. with 45º swivel. al Longer suspension stem Option: SW45 45º hang straight ball swivel for 5/8” dia. suspension stem. SW45 OPTIONS Mounting and accessories Option: CLA: Satin anodized. Clear 3/16” thick aluminum cross guard ring. Available with Kronos series only. Cross blade louver Optional damp location conversion kit: DA: 2” Deep aluminum satin anodized cross blade louver. Option: LB12: Satin anodized 12” LB16: Satin anodized 16” LB22: Satin anodized 21” Damp location converter glass cover Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 17 Web: www.luminis.com. Sept. 2006 Rev.Feb.2007 L U M IN I S Wire Guard Clear prismatic conical drop lens Option: D12: Clear lens (Prisma 12) D16: Clear lens (Prisma 16) D22: Clear lens (Prisma 22) D12T: Clear lens (Prisma Nova 12) D16T: Clear lens (Prisma Nova 16) D22T: Clear lens (Prisma Nova 22) Option: GL16 Prisma 16 series GL22 Prisma 22 series Galvanized wire guard with concentric rings Diffuser trim Option: Alternate inner diffuser Aluminum diffuser trim 12” x 3 1/2” high BA12 Satin anodized aluminum trim. BC12 Painted aluminum trim same color as luminaire. Alternate inner diffuser for PR1630 series. Option: CR12: 12” dia. inner vibrant red diffuser. Aluminum diffuser trim 16” x 5 1/2” high BA16 Satin anodized aluminum trim. BC16 Painted aluminum trim. CY12: 12” dia. vibrant yellow inner diffuser. Aluminum diffuser trim 21” x 61/2” high BA22 Satin anodized aluminum trim. BC22 Painted aluminum trim. Reflector finish OPTIONS Mounting and accessories Alternate Up light reflector finish (Aramis AR101 series) RD1: Option: Inside reflector: Semi-specular Outside reflector: Same color as luminaire RP2 RP6 RP8 RP9 RD1 White enamel indirect reflector. All other visible metal parts as per specified color. Prisma 12 & Prisma Nova 12 Prisma 16 & Prisma Nova 16 Prisma 22 & Prisma Nova 22 Kronos & Torx Non compatible options Frosted prismatic diffuser - (DS1/DS2) Dual switching with (DM) Dimming ballast - (DS1/DS2) Dual switching with (EM) Emergency battery - (DM) Dimming ballast (EM) Emergency battery - QS or QRS option with compact fluo. lamps. Option: W12 Frosted 12” dia. prismatic lens diffuser. W16 Frosted 16” dia. prismatic lens diffuser . W22 Frosted 21” dia. prismatic lens diffuser . Lamps & ballast compatibility Lamp Watts Lamp base 26W G24Xq3 120/277 39W T6 32W G24Xq3 120/277 39W PAR20 Open rated (Med.base) 42W G24Xq4 120/277 50W ED17 Open rated (Med.base) M110/M148 57W G24Xq5 120/277 70W PAR30L Open rated (Med.base) M198/M143 70W G24Xq6 120/277 70W ED17 Open rated (Med.base) M198/M143 85W 2G8-1 70W T6 Enclosed rated (G12 base) M139 100W ED17 Open rated (Med.base) M90/M140 150W ED17 Open rated (Med.base) M102/M142 175W ED17 Enclosed rated (Med.base) M57 250W ED28 Open rated (Mog.base) M58 400W ED37 Open rated (Mog.base) M59 Ballast Volts 120 120W 2G8-1 120 Note: Requires lens Enclosed rated lamps require a lens enclosure option protection with the luminaire. Enclosed rated lamps will not fit with open rated sockets. Lamp watts Lamp base & Type ANSI Code Enclosed rated (G12 base)M130 M130 Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 18 Web: www.luminis.com. Sept. 2006 Rev. July 2007