MEANWELL HLG-100-24

HLG-100
100W Single Output Switching Power Supply
series
Features :
Universal AC input / Full range
Built-in active PFC function
High efficiency up to 93.5%
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Class 2 power unit
Three in one dimming function (1~10Vdc or PWM signal or resistance)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.9)
F
HLG-100-20 A
110
M
M
IP65 IP67
SELV
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
HLG-100-20
HLG-100-24
HLG-100-30
HLG-100-36
HLG-100-42
HLG-100-48
HLG-100-54
DC VOLTAGE
20V
24V
36V
42V
48V
54V
RATED CURRENT
4.8A
4A
30V
3.2A
2.65A
2.28A
2A
1.77A
RATED POWER
96W
96W
96W
95.4W
95.76W
96W
95.58W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
VOLTAGE ADJ. RANGE Note.5 17 ~ 22V
22 ~ 27V
27 ~ 33V
33 ~ 40V
38 ~ 46V
43 ~ 53V
49 ~ 58V
1.4 ~ 2.28A
1.25 ~ 2A
1.1 ~ 1.77A
MODEL
OUTPUT
Can be adjusted by internal potentiometer or through output cable
1.65 ~ 2.65A
3 ~ 4.8A
2.5 ~ 4A
2 ~ 3.2A
CURRENT ADJ. RANGE
VOLTAGE TOLERANCE Note.3
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIME
Note.7 2500ms, 50ms at full load
16ms at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
INPUT
Note.4 90 ~ 264VAC
230VAC / 115VAC
230VAC /115VAC
127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.95/230VAC (Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)
93.5%
93.5%
93.5%
1.2A / 115VAC
0.55A / 230VAC
COLD START 75A/230VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER CURRENT
SHORT CIRCUIT
PROTECTION
230VAC / 115VAC ; B type 2500ms, 200ms at 95% load
OVER VOLTAGE
93.5%
93.5%
93.5%
<0.75mA / 240VAC
95 ~ 106%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
47 ~ 53V
34 ~ 38V
28 ~ 34V
41 ~ 46V
54 ~ 60V
23 ~ 27V
100
10 (RTH2)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-40 ~ +70
VIBRATION
SAFETY STANDARDS Note.6
(Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.03%/
(0 ~ 50 )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;
design refer to UL60950-1, TUV EN60950-1
SAFETY & WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
EMC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 60% load) ; EN61000-3-3
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
59 ~ 65V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURE
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
93.5%
I/P-FG:1.88KVAC
O/P-FG:0.5KVAC
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
192.2Khrs min. MIL-HDBK-217F (25 )
220*68*38.8mm (L*W*H)
1.12Kg; 12pcs/14.4Kg/0.74CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. Type A only.
6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. Refer to warranty statement.
HLG-100
100W Single Output Switching Power Supply
Mechanical Specification
Case No.994A
series
Unit:mm
Blank:(HLG-100)
220
196
12
9.4
9.6
300 20
34.2
T case
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
300 20
-V(Black)
+V(Red)
9.4
34
SJTW 18AWG 3C
98
SJTW 14AWG 2C
4.2 4PL
38.8
T case: Max. Case Temperature.
IP67 rated. Cable for I/O connection.
A Type:(HLG-100-_A)
220
196
12
9.4
9.6
Vo
ADJ.
300 20
34.2
T case
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
98
9.4
300 20
-V(Black)
+V(Red)
34
SJTW 18AWG 3C
Io
ADJ.
SJTW 14AWG 2C
4.2 4PL
38.8
T case: Max. Case Temperature.
IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
B Type:(HLG-100-_B)
220
196
12
9.6
9.4
300 20
SJTW 18AWG 2C
68
T case
98
SJTW 14AWG 2C
34
DIM+(Blue)
DIM-(White)
-V(Black)
+V(Red)
4.2 4PL
T case: Max. Case Temperature.
38.8
SJTW 18AWG 3C
9.4
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
34.2
300 20
File Name:HLG-100-SPEC 2012-03-01
HLG-100
100W Single Output Switching Power Supply
series
D Type(option):(HLG-100-_D)
220
196
12
9.4
9.6
300 20
34.2
T case
98
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
300 20
-V(Black)
+V(Red)
9.4
34
SJTW 18AWG 3C
SJTW 14AWG 2C
4.2 4PL
38.8
T case: Max. Case Temperature.
IP67 rated. Timer dimming function, contact MEAN WELL for details.
Block Diagram
Fosc : 100KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
DIM+
DIM(B Type)
O.L.P.
FG
O.L.P.
PFC
CONTROL
DETECTION
CIRCUIT
PWM
CONTROL
O.T.P.
O.V.P.
Derating Curve
Static Characteristics
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-40
-25
-10
0
15
30
50
AMBIENT TEMPERATURE ( )
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
264
INPUT VOLTAGE (V) 60Hz
File Name:HLG-100-SPEC 2012-03-01
HLG-100
100W Single Output Switching Power Supply
series
Power Factor Characteristic
Constant Current Mode
PF
1 .0 0
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9 0
0 .8 8
0 .8 6
0 .8 4
0 .8 2
0 .8 0
0 .7 8
230V ac
115V ac
50%
60%
70%
80%
90%
100%
(100W)
LOAD
EFFICIENCY vs LOAD (48V Model)
HLG-100 series possess superior working efficiency that up to 93.5% can be reached in field applications.
94
90
EFFICIENCY (%)
86
82
230Vac
78
115Vac
74
70
66
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
Vo(%)
100
(A) Constant
Voltage area
(B)
Constant
Current area
50
50
100
Io (%)
Typical LED power supply I-V curve
File Name:HLG-100-SPEC 2012-03-01
HLG-100
100W Single Output Switching Power Supply
series
DIMMING OPERATION
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
HLG-100
-V(Black)
+V(Red)
Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
Please DO NOT connect "DIM-" to "-V".
Reference resistance value for output current adjustment (Typical)
Resistance value
10K
Percentage of rated current
10%
20K
30K
20%
30%
40K
50K
40%
60K
70K
80K
90K
OPEN
100K
50%
60%
70%
80%
90%
100%
102%~108%
1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
102%~108%
10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
102%~108%
Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to
achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
Dimming connection diagram for turning the lighting fixture ON/OFF :
N
FG
L
Switch
Relay
Adjuster
0~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Green/
Yellow
Brown
Blue
AC/L
HLG-100
B Type
AC/N
DIM+
DIMV(-)
V(+)
Blue
White
Black
Red
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HLG-100-SPEC 2012-03-01
HLG-100
100W Single Output Switching Power Supply
series
WATERPROOF CONNECTION
Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-100 to operate in dry/wet/damp or outdoor environment.
AC
source
HLG-100
I/P
Size
O/P
Size
Pin Configuration (Female)
M12
Order No.
Suitable Current
4-PIN
5A/PIN
M12-04
10A max.
Pin Configuration (Female)
M15
5-PIN
5A/PIN
M12-05
10A max.
2-PIN
12A/PIN
M15-02
12A max.
Order No.
Suitable Current
LED Lamp
Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
20
25
66
26
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HLG-100
O/P Wires
CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
Junction Box(Option )
10
76
5
8.5
SJTW 18AWG 3C
-V(Black)
+V(Red)
32
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
61
8.5 6
196
358
SJTW 14AWG 2C
2- 5
3- PF 1/2"
3- PF 1/2"
150 20
35
38.8
150 20
Optional junction box available for A / Blank - type , please contact MEAW WELL for details.
86
File Name:HLG-100-SPEC 2012-03-01