Preliminary Product Brief MetroMapper™ 2.5G Multi-Service Framer for STS-48/ STM-16, STS-12/STM-4 The MetroMapper™ 2.5G is a multi-service framer capable of mapping datacom traffic into SONET/SDH transport payloads. On the line side, the MetroMapper™ 2.5G supports protected STS-48/STM-16 and STS-12/ STM-4 interfaces. On the client side, one OIF SPI-3 with up to 128 logical channels are provided. Data from the SPI-3 interface is encapsulated by either the GFP-F, LAPS (X.85/.86) or PPP mapping scheme. Low-order and high-order virtual concatenation (VCAT) with Link Capacity Adjustment Schemes (LCAS) for up to 128 virtual concatenated channels is supported. MetroMapper™ 2.5G provides Ethernet VLAN ID processing and enables MPLS label update processing. Applications ■ ■ ■ Access / edge aggregation MSPP Switches and Routers Features Framer ■ Multi-Rate SONET/SDH framer with STS/AU and VT/TU pointer processing capabilities ■ Processes a single STS-48/STM-16 or a quad STS-12/STM-4, STS-3/STM-1 ■ Payload Pointer interpretation and generation ■ Provides full performance monitoring for high- and low-order paths ■ Provides high-order and low-order virtual concatenation according to ITU-T G.707 ■ Supports up to 128 virtual concatenated groups (VCG) ■ Flexible concatenation of up to 48 high-order paths and up to 64 low-order paths into any virtual concatenation group ■ Supports up to 1344 VT1.5/TU-11 or 1008 VT2/TU-12 low-order paths ■ Provides following mapping schemes: – AU-4 / VC-4 / TUG-3 – AU-4 / VC-4 / TUG-3 / TUG-2 – AU-3 / VC-3 or STS-1 / STS-SPE ■ External buffer for up to 64 ms differential delay compensation ■ Different VCG group types are defined: – N × VC-12, N × VC-11, N × VT1.5 SPE, N × VT2 SPE (N ≤ 64) – N × VC-3, N × STS1 SPE (N ≤ 48) – N × VC-4, N × STS3c SPE (N ≤ 16) ■ Fully integrated support for the Link Capacity Adjustment Scheme (LCAS) protocol according to ITU-T G. 7042 Supports 1+1 line protection TOH/POH add/drop interface ■ Fully SONET/SDH compliant Encapsulation/Decapsulation ■ Provides GFP-F mapping according to T1X1.5/ ITU-T G. 7041 ■ PPP processing according to IETF RFC 1662 ■ LAPS processing according to ITU-T X.85 + X.86 ■ 128 logical channels, can be independently configured ■ PPP protocol support: MPLS Unicast & IP Version 4/6 ■ LAPS protocol support: Ethernet and IP Version 4/6 ■ GFP Client management frame insertion/detection SPI-3 Interface ■ 128 logical channels running in 32 bit mode ■ Packet mode with variable block length ■ Interleaved channel mode Ethernet ■ Enables Ethernet via VLAN tagging – VLAN update including tag, retag and change of VLAN IDs – performs 512-4096 entry (port, VLAN) lookup – supports VLAN double tagging Diagnostics ■ Various loop back modes for system debugging implemented Interfaces ■ Source synchronous STS-48/STM-16 or quad STS-12/STM-4 interfaces for working and protected links operating at 622 MHz LVDS or 78 MHz LVTTL ■ TOH/POH add/drop interface ■ OIF compliant SPI-3 interface ■ Memory Interface including two DDR-SRAM and optionally 1 ZBT SRAM interface for L2 update function ■ 66 MHz CPU interface ■ IEEE 1149.1 JTAG boundary scan interface Documentation ■ Data Sheet ■ Hardware Evaluation System ■ WINEASY Software for MS Windows with graphical user interface ■ ■ w w w. i n f i n eo n . c o m / wi r e l i n e Optical Networking N e v e r s t o p t h i n k i n g . Preliminary Product Brief Block Diagram Memory Interface VLAN Processing TOH / POH ADD Interface GFP-F PPP SPI-3 MPLS label Processing X.85/86 SPI-3 VLAN Processing Rx Layer 2 Processing Tx LO POH VCAT LCAS Tx HO POH VCAT LCAS Pointer Gen. Frame Gen. Tx POH Tx Tx TOH TOH Pointer Proc. Pointer Proc. PPP POH Termin. POH Termin. Rx Packet Proces. DeFramer Delay Calcul. Delay Calcul. Rx LO VCAT/ LCAS Rx HO VCAT/ LCAS Memory I/F 32-bit uP Interface STM16/ STS48 4x STM4/ STS12 W&P GFP-F X.85/86 MPLS label Processing Rx System Packet Data Assemb., Mapping, AU Pointer TxLine Line Tx STM16/ STS48 4x STM4/ STS12 622M / 155M Line Interface Single STM-16/ STS-48 Quad STM-4 / STS-12 Tx Packet Proces. Tx Layer 2 Processing Tx System Packet Data Assemb., Mapping, TU Pointer W&P Rx Rx TOH TOH Rx Rx Line Line TOH / POH DROP Interface Product Summary Type Sales Code Package 1020 FineLine BGA (33 × 33 mm) MetroMapper™ 2.5G PEB1761 Application Example Ethernet/MPLS Switching Ethernet MAC QoS ; L2 VPN Service Rate Adaptation VPLS MAC VPN / PWE-3 VLAN/MPLS Processing Services FE/GE Multi-MAC Bridge MetroMapper 2.5G Ethernet/MPLS Switch SPI-3 GFP Mapping VCAT / LCAS Working & Protect SDH/ SONET VCAT-LCAS Framer&Mapper Single STM-16 / STS-48 Quad STM-4 / STS-12 SPI-3 L2 / L3 Processing Traffic Management Switching FE/GE Aggregation MetroMapper 2.5G NP / TM Switch VCAT-LCAS Framer&Mapper SPI-3 Ethernet MAC Rate Adaptation VLAN/MPLS Processing FE /GE TDM Switch TDM Switch Single STM-16 / STS-48 Quad STM-4 / STS-12 MetroMapper 2.5G Multi-MAC Bridge TDM Switch VCAT-LCAS Framer&Mapper SPI-3 How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München © Infineon Technologies AG 2004. All Rights Reserved. Template: pb_tmplt.fm/4 Published by Infineon Technologies AG Single STM-16 / STS-48 Quad STM-4 / STS-12 Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B115-H8436-X-X-7600 Printed in Germany PS 0604.5 R&L