BYV410X-600 Enhanced ultrafast dual rectifier diode Rev. 01 — 29 June 2009 Product data sheet 1. Product profile 1.1 General description Enhanced ultrafast dual rectifier diode in a SOT186A (TO-220AB) plastic package. 1.2 Features and benefits High thermal cycling performance Isolated package Soft recovery characteristic minimizes power consuming oscillations Low thermal resistance Very low on-state losses 1.3 Applications Dual mode (DCM and CCM) PFC Power Factor Correction (PFC) for Interleaved Topology 1.4 Quick reference data Table 1. Quick reference Symbol Parameter IO(AV) average output current Conditions Min Typ Max Unit square-wave pulse; δ = 0.5; Th ≤ 42 °C; both diodes conducting; see Figure 1; see Figure 2 - - 20 A Dynamic characteristics trr reverse recovery time IF = 1 A; VR = 30 V; dIF/dt = 100 A/µs; Tj = 25 °C; see Figure 5 - 20 35 ns Qr recovered charge IF = 1 A; VR = 30 V; dIF/dt = 100 A/µs - 15 28 nC IF = 10 A; Tj = 25 °C; see Figure 4 - 1.4 2.1 V IF = 10 A; Tj = 150 °C - 1.3 1.9 V Static characteristics VF forward voltage BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 2. Pinning information Table 2. Pinning information Pin Symbol Description Simplified outline 1 A1 anode 1 2 K cathode 3 A2 anode 2 mb n.c. mounting base; isolated Graphic symbol mb A1 A2 K sym125 1 2 3 SOT186A (TO-220F) 3. Ordering information Table 3. Ordering information Type number Package Name Description Version BYV410X-600 TO-220F plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3-lead TO-220 "full pack" SOT186A 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VRRM Conditions Min Max Unit repetitive peak reverse voltage - 600 V VRWM crest working reverse voltage - 600 V VR reverse voltage DC - 600 V IO(AV) average output current square-wave pulse; δ = 0.5; Th ≤ 42 °C; both diodes conducting; see Figure 1; see Figure 2 - 20 A IFRM repetitive peak forward current square-wave pulse; δ = 0.5; tp = 25 µs; Th ≤ 60 °C; per diode - 20 A IFSM non-repetitive peak forward current tp = 8.3 ms; sine-wave pulse; Tj(init) = 25 °C; per diode - 132 A tp = 10 ms; sine-wave pulse; Tj(init) 25 °C; per diode - 120 A Tstg storage temperature -40 150 °C Tj junction temperature - 150 °C BYV410X-600_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 2 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 003aad262 24 Ptot (W) Ptot (W) δ=1 a = 180° 0.5 18 003aad263 24 18 120 90 0.2 60 0.1 30 12 12 6 6 0 0 0 Fig 1. 5 7 IF(AV) (A) 15 Forward power dissipation as a function of average forward current; square waveform; maximum values 0 Fig 2. IF(AV) (A) 10 Forward power dissipation as a function of average forward current; sinusoidal waveform; maximum values BYV410X-600_1 Product data sheet 5 © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 3 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 5. Thermal characteristics Table 5. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Rth(j-h) thermal resistance from junction to heatsink with heatsink compound; per diode; see Figure 3 - - 5 K/W with heatsink compound; both diodes conducting - - 3 K/W - 55 - K/W Rth(j-a) thermal resistance from junction to ambient free air 001aaf033 10 Zth(j-h) (K/W) 1 10−1 δ= P tp T 10−2 t tp 10−3 10−6 Fig 3. T 10−5 10−4 10−3 10−2 10−1 1 10 tp (s) Transient thermal impedance from junction to heatsink per diode as a function of pulse width 6. Isolation characteristics Table 6. Isolation characteristics Symbol Parameter Conditions Min Typ Max Unit Visol(RMS) RMS isolation voltage 50 Hz < f < 60 Hz; sinusoidal waveform; relative humidity < 65 %; clean and dust free; from all terminals to external heatsink - - 2500 V Cisol isolation capacitance from cathode to external heatsink; f = 1 MHz - 10 - pF BYV410X-600_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 4 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 7. Characteristics Table 7. Characteristics Symbol Parameter Conditions Min Typ Max Unit IF = 10 A; Tj = 25 °C; see Figure 4 - 1.4 2.1 V IF = 10 A; Tj = 150 °C - 1.3 1.9 V VR = 600 V; Tj = 100 °C - 0.7 1.5 mA VR = 600 V; Tj = 25 °C - 10 50 µA Static characteristics forward voltage VF reverse current IR Dynamic characteristics Qr recovered charge IF = 1 A; VR = 30 V; dIF/dt = 100 A/µs - 15 28 nC trr reverse recovery time IF = 1 A; VR = 30 V; dIF/dt = 100 A/µs; Tj = 25 °C; see Figure 5 - 20 35 ns IRM peak reverse recovery current IF = 1 A; VR = 30 V; dIF/dt = 100 A/µs; see Figure 5 - 1.4 1.9 A VFR forward recovery voltage IF = 1 A; dIF/dt = 100 A/µs; see Figure 6 - 3.2 - V 003aad261 12 dlF IF dt IF (A) trr 8 time (1) (2) 25 % (3) 4 Qr 100 % IRM IR 003aac562 0 0 Fig 4. 1 2 VF (V) 3 Fig 5. Reverse recovery definitions; ramp recovery Forward current as a function of forward voltage BYV410X-600_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 5 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode IF time VF VFRM VF time 001aab912 Fig 6. Forward recovery definitions BYV410X-600_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 6 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 8. Package outline Plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3-lead TO-220 'full pack' SOT186A E A A1 P q D1 mounting base T D j L2 L1 K Q b1 L b2 1 2 3 b c w M e e1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) (1) UNIT A A1 b b1 b2 c D D1 E e e1 j K mm 4.6 4.0 2.9 2.5 0.9 0.7 1.1 0.9 1.4 1.0 0.7 0.4 15.8 15.2 6.5 6.3 10.3 9.7 2.54 5.08 2.7 1.7 0.6 0.4 L L1 14.4 3.30 13.5 2.79 L2 max. P Q q 3 3.2 3.0 2.6 2.3 3.0 2.6 T (2) 2.5 w 0.4 Notes 1. Terminal dimensions within this zone are uncontrolled. 2. Both recesses are ∅ 2.5 × 0.8 max. depth OUTLINE VERSION SOT186A Fig 7. REFERENCES IEC JEDEC JEITA 3-lead TO-220F EUROPEAN PROJECTION ISSUE DATE 02-04-09 06-02-14 Package outline SOT186A (TO-220F) BYV410X-600_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 7 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 9. Revision history Table 8. Revision history Document ID Release date Data sheet status Change notice Supersedes BYV410X-600_1 20090629 Product data sheet - - BYV410X-600_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 8 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 10. Legal information 10.1 Data sheet status Document status [1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 10.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 10.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 10.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 11. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] BYV410X-600_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 29 June 2009 9 of 10 BYV410X-600 NXP Semiconductors Enhanced ultrafast dual rectifier diode 12. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 10.1 10.2 10.3 10.4 11 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1 General description . . . . . . . . . . . . . . . . . . . . . .1 Features and benefits . . . . . . . . . . . . . . . . . . . . .1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Quick reference data . . . . . . . . . . . . . . . . . . . . .1 Pinning information . . . . . . . . . . . . . . . . . . . . . . .2 Ordering information . . . . . . . . . . . . . . . . . . . . . .2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .2 Thermal characteristics . . . . . . . . . . . . . . . . . . .4 Isolation characteristics . . . . . . . . . . . . . . . . . . .4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . .7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . .8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . .9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . .9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Contact information. . . . . . . . . . . . . . . . . . . . . . .9 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 29 June 2009 Document identifier: BYV410X-600_1