Not for new design. Use PEH506 or ELH Series. ALC12 Series RoHS 85°C Compliant •Compact Size • 2000 hours at 85 °C (Ur, Ir applied) • Excellent surge voltage capability •Optimized designs available on request application Basic design Designed for applications where high reliability and compact sizes are important such as switch mode power supplies and frequency converters. The ALC12 (85°C) is a high CV snap-in version of the ALC10 range. Both series are designed for applications where high reliability and compact sizes are important such as switch mode power supplies and frequency converters. Specification Standards IEC 60384-4 Long Life Grade 40/85/56, Capacitance range 150 – 8200 µF Capacitance tolerance –20 to +20% Rated voltage UR 200 - 450 VDC Surge voltage US 1.15 x UR (for UR < 250 VDC) 1.10 x UR (for UR > 350 VDC) Surge voltage USS (Short duration) UR USS 200 250 350 400 415 450 500 350 400 500 520 530 550 600 Leakage current IL = 0.006 x CR x UR (µA) or 6mA whichever is the smaller. Note, CR is in µF. Test Condition: UR, 5mins., 20°C Operational life time +85°C, UR , IR Can Diameter 30, 35, 40, 45, 50 2000 hrs End of Life requirement: Test Condition: < 30s surge, 1000 cycles @ 85°C Test Condition: < 500ms surge, 100 cycles @ 20°C +85°C, UR Can Diameter 30, 35, 40, 45, 50 9000 hrs Shelf Life 2000 hrs at 0V +85°C, or 30000 hrs at 0V +40°C Temperature range –40 to +85°C (Operating) ∆C/C ESR IL < ±10% < 2 x initial ESR value < initial specified limit -55°C to +85°C (Storage) BHC and Evox Rifa Electrolytic Capacitors 101 Not for new design. Use PEH506 or ELH Series. ALc12 85°c Specification L Ø2.5 MIN STYLE A = 6.3 ± 1 STYLE D = 4.0 ± 1 STYLE F = 4.0 ± 1 + ve 3.3 ± 0.1 Ø2 ± 0.1 TYP - + ØD 10 ± 0.1 10 ± 0.1 2 ± 0.1 4.75 ± 0.1 STYLE G = 6.3 ± 1 STYLE H = 4.0 ± 1 STYLE C = 6.3 ± 1 STYLE E = 4.0 ± 1 4HOLES ø2±0.1 ON A ø22.5PCD 5HOLES ø2±0.1 ON A ø25.0PCD - ve - 30° 30° 30° + 30° 30° +ve + + ve 2.0max 2.0max 4HOLES ø2±0.1 ON A ø22.5PCD 30° 30° 30° +ve 3.75 + + ve 3.75 - ve 30° + 30° 5HOLES ø2±0.1 ON A ø25.0PCD STYLE K - ve _ STYLE J - ve Mounting These capacitors are designed to be mounted by their terminations alone, and may be used in any position. Dummy pins must be isolated on 4 and 5 pin styles. Terminal Style Description 2 pin 2 pin 3 pin 4 pin Pin length 6.3±1 4.0±1 4.0±1 6.3±1 CodeADFC DIA. mm -0+1 30 • • • 35 • • • 40 • • • 45 50 • • • • 4 pin 5 pin 5 pin 4.0±1 6.3±1 4.0±1 EGH 4 pin 5 pin 5.75 5.75 JK • • • • • • • • • • • • • CASE CODE (COMPONENT WEIGHT grams - nominal ) Length mm ±2���������������������������� 30�������������������������� 35 40 45 50 55 60 80 105 ������������ Dia. mm -0+1 30 35 40 45 50 CB (35) DB (42) EB (49) FB (62) KB (75) CC (40) DC (50) EC (57) FC (72) KC (88) Other sizes available upon request CD (45) DD (55) ED (65) FD (82) KD (100) CE (50) DE (65) EE (80) FE (92) KE (113) CF (55) DF (70) EF (82) FF (103) KF (126) DG (75) EG (95) FG (113) KG (138) DH (80) EH (98) FH (123) KH (151) DL (105) EL (131) FL (164) KL (201) EP (170) FP (215) KP (264) Not for new design. Use PEH506 or ELH Series. ALC12 85°c Article table alC12 (85°C) Cap (µF) Case Size (mm) ESR (mW) at 20°C 100Hz (max) Impedance (mW) at 20°C 10 KHz (max) Ripple current(A) at 85°C Type number 100 Hz 10 KHz 224 181 135 151 107 125 186 145 91 119 76 101 68 79 75 60 31 28 26 1.75 2.06 2.52 2.58 3.09 2.96 2.26 2.73 3.70 3.17 4.21 3.54 4.99 4.27 4.48 5.55 8.39 8.85 9.21 2.81 3.36 3.81 3.63 4.86 4.18 2.75 3.35 5.01 3.90 5.65 4.32 6.90 5.26 5.33 6.90 12.08 12.05 11.90 ALC12A561CB200 ALC12A681CC200 ALC12A102CD200 ALC12A102DC200 ALC12A122CF200 ALC12A122DD200 ALC12A122EB200 ALC12A152EC200 ALC12A182DF200 ALC12A182ED200 ALC12A222DH200 ALC12A222EE200 ALC12A272DL200 ALC12A272EG200 ALC12A332EH200 ALC12A392EL200 ALC12A562EP200 ALC12G682FP200 ALC12G822KP200 299 244 204 194 225 144 160 170 115 140 95 118 93 66 86 61 32 29 27 1.56 1.82 2.12 2.34 2.12 2.75 2.69 2.58 3.38 2.99 3.87 3.36 4.02 4.79 4.28 5.28 7.72 8.22 8.63 2.66 3.17 3.69 3.56 2.94 4.62 4.09 3.41 4.96 3.96 5.58 4.35 5.32 6.81 5.43 7.01 12.08 12.11 12.03 ALC12A391CB250 ALC12A471CC250 ALC12A561CD250 ALC12A681DC250 ALC12A681EB250 ALC12A821CF250 ALC12A821DD250 ALC12A102EC250 ALC12A122DF250 ALC12A122ED250 ALC12A152DH250 ALC12A152EE250 ALC12A182EG250 ALC12A222DL250 ALC12A222EH250 ALC12A272EL250 ALC12A392EP250 ALC12G472FP250 ALC12G562KP250 397 321 231 243 188 249 181 199 144 164 139 107 118 99 73 68 55 32 29 1.30 1.52 1.90 2.02 2.31 1.95 2.44 2.32 2.92 2.68 3.02 3.51 3.39 3.89 4.37 4.85 5.61 7.53 7.95 2.55 3.01 3.55 3.51 4.42 2.85 3.97 3.50 4.93 4.04 4.50 5.45 4.92 5.62 6.64 6.89 7.99 11.79 11.73 ALC12A221CB350 ALC12A271CC350 ALC12A391CD350 ALC12A391DC350 ALC12A471CF350 ALC12A471EB350 ALC12A561DD350 ALC12A561EC350 ALC12A681DF350 ALC12A681ED350 ALC12A821EE350 ALC12A102DH350 ALC12A102EF350 ALC12A122EH350 ALC12A152DL350 ALC12A182EL350 ALC12A222EP350 ALC12G332FP350 ALC12G392KP350 200 VDC (UR ) 560 680 1000 1000 1200 1200 1200 1500 1800 1800 2200 2200 2700 2700 3300 3900 5600 6800 8200 30x30 30x35 30x40 35x35 30x50 35x40 40x30 40x35 35x50 40x40 35x60 40x45 35x80 40x55 40x60 40x80 40x105 45x105 50x105 342 278 201 218 162 181 243 190 128 156 107 132 93 104 96 78 43 38 34 250 VDC (UR ) 390 470 560 680 680 820 820 1000 1200 1200 1500 1500 1800 2200 2200 2700 3900 4700 5600 30x30 30x35 30x40 35x35 40x30 30x50 35x40 40x35 35x50 40x40 35x60 40x45 40x55 35x80 40x60 40x80 40x105 45x105 50x105 456 375 314 285 316 219 236 232 167 192 136 160 128 94 115 85 48 42 38 350 VDC (UR ) 220 270 390 390 470 470 560 560 680 680 820 1000 1000 1200 1500 1800 2200 3300 3900 30x30 30x35 30x40 35x35 30x50 40x30 35x40 40x35 35x50 40x40 40x45 35x60 40x50 40x60 35x80 40x80 40x105 45x105 50x105 643 522 370 384 304 368 279 299 225 246 207 163 175 146 111 100 81 49 44 Termination Style A,C,D,E,F,G,H,J or K * BHC and Evox Rifa Electrolytic Capacitors 103 Not for new design. Use PEH506 or ELH Series. ALC12 85°c Article table ALC12 (85°C) Cap (µF) Case Size (mm) ESR (mW) at 20°C 100Hz (max) Impedance (mW) at 20°C 10 KHz (max) Ripple current(A) at 85°C Type number 100 Hz 10 KHz 509 414 339 299 326 238 252 240 178 200 149 168 143 102 119 80 53 39 35 1.21 1.42 1.66 1.91 1.79 2.16 2.18 2.21 2.75 2.54 3.14 2.87 3.22 3.90 3.71 4.64 6.11 7.11 7.60 2.38 2.82 3.28 3.35 2.86 4.17 3.85 3.38 4.72 3.92 5.34 4.37 4.80 6.52 5.46 6.71 11.06 11.40 11.38 ALC12A181CB400 ALC12A221CC400 ALC12A271CD400 ALC12A331DC400 ALC12A331EB400 ALC12A391CF400 ALC12A391DD400 ALC12A471EC400 ALC12A561DF400 ALC12A561ED400 ALC12A681DH400 ALC12A681EE400 ALC12A821EF400 ALC12A102DL400 ALC12A102EH400 ALC12A152EL400 ALC12A182EP400 ALC12G272FP400 ALC12G332KP400 548 382 312 324 252 266 313 255 190 211 178 136 150 123 120 107 63 55 47 1.15 1.45 1.70 1.82 2.08 2.10 1.79 2.13 2.64 2.45 2.76 3.23 3.10 3.69 3.62 4.21 5.77 6.27 6.81 2.34 2.83 3.30 3.30 4.10 3.79 2.74 3.35 4.66 3.88 4.34 5.22 4.76 6.26 5.44 6.69 10.51 10.87 11.12 ALC12A151CB450 ALC12A221CC450 ALC12A271CD450 ALC12A271DC450 ALC12A331CF450 ALC12A331DD450 ALC12A331EB450 ALC12A391EC450 ALC12A471DF450 ALC12A471ED450 ALC12A561EE450 ALC12A681DH450 ALC12A681EF450 ALC12A821DL450 ALC12A821EH450 ALC12A102EL450 ALC12A152EP450 ALC12G182FP450 ALC12G222KP450 400 VDC (UR ) 180 220 270 330 330 390 390 470 560 560 680 680 820 1000 1000 1500 1800 2700 3300 30x30 30x35 30x40 35x35 40x30 30x50 35x40 40x35 35x50 40x40 35x60 40x45 40x50 35x80 40x60 40x80 40x105 45x105 50x105 794 648 529 457 485 370 385 352 270 295 226 245 207 155 172 115 82 59 51 450 VDC (UR ) 150 220 270 270 330 330 330 390 470 470 560 680 680 820 820 1000 1500 1800 2200 30x30 30x35 30x40 35x35 30x50 35x40 40x30 40x35 35x50 40x40 40x45 35x60 40x50 35x80 40x60 40x80 40x105 45x105 50x105 861 596 486 500 395 410 460 379 292 314 265 206 220 182 180 156 96 82 70 Termination Style A,C,D,E,F,G,H,J or K * Not for new design. Use PEH506 or ELH Series. operational data Reliability Operational Lifetime Please see separate BHC application notes TD003 for calculating operational life expectancy under customer specific conditions. The failure rate is derived from our periodic test results. The failure rate (λR) is therefore only given at test temperature for life tests. An estimation is also given at 40°C. The expected failure rate for this capacitor range is based on our periodic test results for capacitors with structural similarity. Failure rate is frequently quoted in FIT (Failures In Time) where 1 FIT = 1 x 10 -9 failures per hour. Ta Failure rate per hour 85°C 40°C 250 FIT 12 FIT ALC12 85°c Failure rate per hour for catastrophic plus parametric failures. Mechanical data Mounting position The capacitor can be mounted upright or inclined to a horizontal position. Insulating resistance > 100 Mohms at 100V d.c., across insulating sleeve. Vibration 10Hz to 500Hz at 0.75mm or 10g for 3x2hrs duration. 10Hz to 55Hz at 0.35mm or 5g for 3x0.5hrs duration (45/50mm diameter cans). Voltage Proof > 2500V d.c., across insulating sleeve. is in the form of a grooved section on the surface of the can which is a weakened area and is designed to relieve build up of internal pressure due to over stress or catastrophic failure. Safety vent A safety vent for over pressure is featured on either the base (opposing end to the terminals) or on the the side of the can. This Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. BHC and Evox Rifa Electrolytic Capacitors 105