Instant GUI 4.3” Touch Screen LCD Kit uEZGUI-1788-43WQS for the NXP LPC1788 Highlights Features Sharp 4.3” TFT WQVGA Touch Screen LCD 480 x 272 NXP LPC1788 CPU with 512KB internal Flash USB Device Mini-B for power and PC communications 8MB of SDRAM 8MB of NOR FLASH (opt to 16MB) 2GB microSD Memory Card NV Data Storage via 2kB Internal EEPROM Internal Real-Time Clock with Supercap Backup Speaker, 3-axis Accelerometer, Temperature Sensor Mini-JTAG Debug Connector Actual Size 4.6” x 2.84” x 0.54” External Expansion via two I/O Connectors for Serial Ports, UART, I2C, SPI, USB Host/Device RMII interface for Ethernet 10/100 Software uEZ® / FreeRTOS Rapid Development Platform MicroSD card maps as USB Flash Drive to the PC Rowley CrossWorks Compiler and Tool Suite Segger J-Link Lite JTAG for programming and debug Features The NXP LPC1788 Cortex M-3 based microcontroller runs the ® open source uEZ + FreeRTOS software platform. The LPC1788 has 512KB of internal Flash memory, 96KB of internal SRAM, a 10/100 Ethernet Media Access Controller (MAC), a USB full speed device/host/OTG controller, four UARTs, two CAN channels and a collection of serial communications interfaces. The uEZ GUI board also includes 8MB of external SDRAM and 8MB of external NOR Flash. Software Included ® μEZ (pronounced Muse) is an open source rapid development platform that supplies application developers with ® an extensive library of open source software, drivers, and processor support - all under a common framework. μEZ allows companies to focus on innovation and their value-added applications while minimizing development time and maximizing software reuse. ® The diagram below shows a typical embedded application stack. The μEZ components comprise three primary categories to simplify embedded application development: ® Operating System Abstraction Layer (μEZ OSAL) ® ® ® Sub-system drivers (ex: μEZ TCP/IP, μEZ USB, μEZ Driver) ® Hardware Abstraction Layer (μEZ HAL) The uEZGUI-1788-43WQS is designed to be used as an “off-the-shelf” Graphical User Interface (GUI) or Human Machine Interface (HMI) in a variety of end customer applications. The miniature, self-contained design is well suited to embed directly into your product or FDI offers prepackaged versions for stand-alone use (for example, the uEZGUI-1788-43WQS-BA is available for < $150.00 in volume). FDI also offers low cost customization services for customer specific hardware, software or packaging applications at volumes of 500 units or more. Ordering Information Part Number: uEZGUI-1788-43WQS NXP Part Number: OMxxxx Order Online at: www.teamfdi.com/uezgui Warranty: 30-day money back guarantee Phone 256-883-1240 Fax 256-883-1241 [email protected] www.teamfdi.com Kit Contents: ® - uEZ GUI 4.3” Board with LPC1788 - Sharp 4.3” WQVGA Touch Screen LCD - USB Device cable for Power and PC communications - Mini JTAG Debugger with cables Download Users Manual, documents, schematics, and software examples at: www.teamfdi.com/uEZGUI