PDF Drawing

TECHNISCHE SKIZZE / Technical sketch
BAUTEILE / FERTIGUNGSHINWEISE
Piece parts / Manufacturing notices
Kabelaufdruck (Bsp.)
- Kabelaufdruck mittels Tintenstrahldrucker entspr. Techn. Skizze
Cable imprint (e.g.)
ERNI Art.-Nr.
Part No.
15 0,59
label holder
Production date
e.g.: KW42 2006
Good chemical and oil resistance (parts with PVC-cable are not restistant).
When using agressive media, material resistance based on application
must be checked.
15 0,59
Kennzeichnungsträger
Cable imprint with ink-jet printer see technical sketch
- Gute Chemikalien- und Ölbeständigkeit (Ölbeständigkeit gilt nicht für den
Einsatz mit PVC-Kabel). Beim Einsatz aggressiver Medien ist die
Materialbeständigkeit applikationsbezogen zu überprüfen.
ERNI XXXXXX PUR 5x0.34 422006
75 ±25 2,95 ±1,00
41 1,62
See table A
STROMLAUFPLAN / Schematic diagram
38 1,51
Litze braun (+)
flexible conductor brown (+)
Litze weiss (Ö)
flexible conductor white (Ö)
Litze schwarz (S)
flexible conductor black (N/O)
Litze blau (-)
flexible conductor blue(-)
Litze gnge
flexible c. green/yellow
1
1
1
5
2
Ansicht: Steckgesicht; Kontaktbelegung /
4
4
View: mating face; pin assignment
2
5
3
2
3
4
3
1
2
4
3
5
5
SPECIFICATIONS Circular Connector
Stand ard ap p l i c .
Pin assignment:
Coding:
Connection:
LED:
Packaging:
Mate ri al s & F i n i sh
Contact material:
a) male
b) female
Contact finish, mating zone:
a) male
b) female
Screw material:
Screw plating:
Val ue
M12 male, straight, black M12 female, straight, black
5 pin
A-coding
Screw locking
M12x1mm (0,6 Nm)
1 piece per bag
Standard description CuZn39Pb3F50
Standard description CuNi2Si HV160U
Thickness of plating
Thickness of plating
Standard description
Standard description
0,5 µm Au over 2 µm Ni
0,8 µm Au (partial)
Zinc pressure die casting
Ni 4-6 µm
Cab l e (ad d i ti o n al i n fo se e tab l e )
Jacket color
black
Conductor cross-section
Bending radius min.
5 x 0,34 mm
10 x jacket diameter
2
El e c tri c al D ata
Rated (nominal) voltage; max.
Rated current; per contact, max.
Rated impulse voltage
Stand ard ap p l i c .
IEC 61-076-2-101
IEC 61-076-2-101
IEC 61-076-2-101
A p p ro v al s
Protection class
(mated and locked) IEC 60529
Pollution degree
Insulation category
IEC 60664-1
RoHS compliant
Val ue
125 V AC/DC
4A
1,5 kV
IP67
3
I
Yes
Artikel-Nr.
Leitungslänge (A)
223944
300 +30 mm [11.81 +1,2 in]
600 +60 mm [23.62 +2,4 in]
1.000 +100 mm [39.37 +4 in]
1.500 +100 mm [59.05 +4 in]
2.000 +100 mm [78,74 +4 in]
Cable length (A)
Part No.
Copyright by ERNI GmbH
Proprietary notice pursuant to ISO 16016 to be observed.
T e c h ni cal Sp e c i fi c ati o n s
Housing:
KupferKabelmantel
gewicht
Außendurchmesser
Copper
weight
20 g
Jacket
material
Jacket diameter
PUR
(UL/CSA)
5,0 mm 5%
[0.196 in 5%]
Tolerances
Information:
Aderisolation
Zul. Temp.-Bereich
für Kabel
TPM
-25... +80 °C
Wire isolation
Permissable temp.
for cable
1:1
Scale
All Dimensions
in mm [in]
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
Designation
Subject to modification without
prior notice.
Drawing will not be updated.
CCCS M12, 5pin / M12, 5pin
A-coding
223945
www.ERNI.com
-
20.08.2008
Index
Date
Class
CCCS
I
A3