BAUTEILE / FERTIGUNGSHINWEISE TECHNISCHE SKIZZE / Technical sketch Piece parts / Manufacturing notices - Kabelaufdruck mittels Tintenstrahldrucker entspr. Techn. Skizze Cable imprint with ink-jet printer see technical sketch - Gute Chemikalien- und Ölbeständigkeit (Ölbeständigkeit gilt nicht für den Einsatz mit PVC-Kabel). Beim Einsatz aggressiver Medien ist die Materialbeständigkeit applikationsbezogen zu überprüfen. Kabelaufdruck (Bsp.) Cable imprint (e.g.) Kennzeichnungsträger Good chemical and oil resistance (parts with PVC-cable are not restistant). When using agressive media, material resistance based on application must be checked. Production date e.g.: KW42 2006 label holder STROMLAUFPLAN / Schematic diagram ERNI Art.-Nr. Part No. 1 ERNI XXXXXX PUR 4x0.34 422006 2 4 44,5 1,75 See table A 1 5 2 3 Ansicht: Steckgesicht; Kontaktbelegung / View: mating face; pin assignment 2 5 Stand ard ap p l i c . Pin assignment: Coding: Connection: LED: Packaging: Mate ri al s & F i n i sh Contact material: a) male b) female Contact finish, mating zone: a) male b) female Screw material: Screw plating: Litze weiss (ö) flexible conductor white(N/C) Litze schwarz (s) flexible conductor black(N/O) Litze blau (-) flexible conductor blue (-) Schirm shield 1 2 4 3 4 3 Artikel-Nr. SPECIFICATIONS Circular Connector T e c h n i c al Sp e c i fi c ati o n s Housing: flexible conductor brown (+) 1 Val u e M12 male, straight, black M12 female, straight black 4 pin A-coding Screw locking M12x1mm (0,6 Nm) 1 piece per bag Standard description CuZn39Pb3F50 Standard description CuNiZSiHV1604 Thickness of plating Thickness of plating Standard description Standard description 0,5 µm Au over 2 µm Ni 0,8 µm Au (partial) Zinc pressure die casting Ni 4-6 µm Cab l e (ad d i ti o n al i n fo se e tab l e ) Jacket color grey Conductor cross-section Bending radius min. 4 x 0,34 mm 10 x jacket diameter 2 Leitungslänge (A) Part No. El e c tri c al Data Rated (nominal) voltage; max. Rated current; per contact, max. Rated impulse voltage Stan d ard ap p l i c . IEC 61-076-2-101 IEC 61-076-2-101 IEC 61-076-2-101 A p p ro v al s Protection class (mated and locked) IEC 60529 Pollution degree Insulation category IEC 60664-1 RoHS compliant P art Mark i n g (c ab l e i mp ri n t) Part number Company Logo Date of manufacturing Jacket material Flex. conductor diameter Val u e 60 V DC 4A 1,5 kV IP67 3 I Yes required required required required required Cable length (A) 300 +50 mm [11,81 +1,2 in] 600 +60 mm [23,62 +2,4 in] 225101 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 4 3 47 1,87 Litze braun (+) 1.000 +100 mm [39,37 +4 in] 1.500 +100 mm [59,05 +4 in] 2.000 +100 mm [78,74 +4 in] 3.000 ± 1,5% [118,11 ] 5.000 ± 1,5% [196,85 ] 10.000 ± 1,5% [393,70 ] KupferKabelmantel Außendurchmesser gewicht Copper weight 18 g 31 g 50 g 73 g 95 g 110 g 180 g 358 g Jacket material PUR shielded Jacket diameter 5,9 mm 5% [0.232 in 5%] Tolerances Information: Aderisolation Wire isolation PVC Zul. Temp.-Bereich für Kabel Permissable temp. for cable -5... +70 °C ( flexing ) -25... +80 °C ( static ) 1:1 Scale All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. CCCS M12, 4pin / M12, 4pin shielded, A-coding 324089 www.ERNI.com b 15.07.2010 Index Date Class CCCS I (1/1) A3