Packing/ Verpackung winding dia./Wickeldurchmesser: Pack.unit/VPE: pack mat./Verp. Material Labeling/Kennzeichen printed label/Bedr.Etikett: Technical data / Technische Daten screw plating M12 tightening torque / Anzugsmoment / / / / according IEC 61 076 - 2 - 101 TPU TPU black / schwarz CuZn Au over Ni / Gold über Nickel CuZn 39Pb3 machined/Drehteil selfsecuring / selbstsicherend Cu1 Ni5-7 Cr0,1-0,3 0,6 Nm electrical / elektrisch Current carrying Capacity / Strombelastbarkeit Voltage proof / Prüfspannung Ueff. (cable / Kabel) Voltage proof / Prüfspannung Ueff. (cable / Kabel) cable performance / Kabelperformance continious cable shielding (connected via M12 screw) DC resistance / DC Widerstand (cable / Kabel) / / / / / / 1 A at 20°C 500 V AC core - shield 1000 V core - core CAT 5e nach EIA/TIA 568 conn. to M12 screw 142 Ohm/km / 284 Ohm/km (loop) environmental / Umweltbedingungen operating temperature range / Betriebstemperatur fixed cable / fest verlegt moved cable / bewegt protection degree M12 side / Schutzart M12 Seite chemical resistance / Medienbeständigkeit RoHS compliant on smallest Pack unit/auf kleinster VPE on outer package/auf Umverpackung acc. ERNI spec./nach ERNI Spezifikationen suitable for CAT5/5e data transmission (10/100 BaseT, Fast Ethernet) networks resp. generic cabling acc. ISO/IEC 11801 Class D Printing/Bedruckung: Application/Anwednung / / / / / / / / - 25°C to + 80°C - 5°C to + 60°C IP67 acc. IEC 60529 mineral oils, grease, UV radiation/ Mineralöle, Fette, UV Strahlung Yes Manufacturing test/Produktionstest el.connection/Verbindungstest: visual inspection/Sichtprüfung: Thread gauge test/Gewindeprüfung: Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. mechanical / mechanisch M12 connector / M12 Stecker Insulation Body / Isolierkörper Contact Insert / Kontaktträger colour / Farbe Contact / Kontakt contact plating / Konntaktoberfläche M12 Locking screw / M12 Verr. Schraube 180±20 mm (2....10m); 250±30 (20m) 5 pcs./Stk.(0,3....10m); 2pcs./Stk.(20m) plastic bag /zip)/Druckverschlussbeutel 100% each wire+shield/jede Ader+Schirm 100% 6g Gauge / Lehre Gauge to be used without abnormal force Lehre ohne erhöhten Kraftaufwand anwenden Tolerances Information: 1:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. M12-M12 CAT5e Assembly 324177 www.ERNI.com c 19.10.2012 Index Date Class CCCS I (1/1) A3