RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT PCB EDGE LP 0,58 14,72 1,00 25,40 MAX 0,01 ±0,00 0,38 ±0,10 0,66 16,66 0,63 15,88 1 0,54 13,63 8 0,12 ±0,02 3,05 ±0,50 L.E.D. 1 L.E.D. 2 0,43 10,89 0,45 ±0,01 11,43 ±0,13 date code Datumscode 203420 XXXX RC Note 1: RoHS compliant MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK NO. IDENT. NR. LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE 203420 GREEN GREEN L3 SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin), OVER Ni TERMINAL FINISH: Sn MATTE A LED LENS: EPOXY MECHANICAL CHARACTERISTICS OPERATING TEMPERATURE: 0°C TO 70°C Scale 2:1 All Dimensions in mm Designation Consider protection memo from DIN 34 DURABILITY: 1000 MATING CYCLES Tolerances Information: SCHEMATIC NUMBER M5B02 All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. A 20.05.2008 Index Date Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIMR 8C10T, 1x1, INT. MAG., LED. REVERSE LATCH 203419 www.ERNI.com Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 0,05 1,27 0,06 ±0,00 1,60 ±0,07 X2 9 11 12 13 14 0,08 2,03 0 2 ± 0, 0 0 , 13 ± 0 , 0 7 X 5 2 , 3 00 ±0, 7 X4 0,04 2 ±0,0 1,0 1 0,35 8,89 2 10 0,10 2,54 0,18 4,57 0,12 3,05 0,10 2,54 0,04 ±0,00 0,89 ±0,07 X10 0,03 0,64 0,45 11,43 0,53 13,57 0,61 15,49 ELECTRICAL SCHEMATICS 1000 BASE T - M5B02 ELEKTRISCHER SCHALTPLAN PCB 4X 75 4X 0.01 µF CABLE Ohms A TD0+ P1 J1 MX0+ TD0- P2 J2 MX0- TD1+ P3 J3 MX1+ TD1- P6 J6 MX1- TD2+ P4 J4 MX2+ TD2- P5 J5 MX2- TD3+ P7 J7 MX3+ TD3- P8 J8 MX31000pF/2KV VCC P9 SHIELD GND P10 LED SPECIFICATIONS LED ANWEISUNG COLOR FARBE Vf Vf If TYP MAX mA CIRCUIT DIAGRAM SCHALTPLAN YELLOW 2.1 2.5 20 11 12 13 14 MAGNETICS SPECIFICATIONS @ 25°C GREEN 2.2 2.5 20 11 12 13 14 TURNS RATIO: 1CT:1CT ±3% OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN RED 2.25 2.5 20 11 12 13 14 11 12 13 14 INSERTION LOSS: CMR: 1-100 MHz 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz ISOLATION -1.1 dB MAX ORANGE/GREEN -18 dB MIN -14 dB MIN -12 dB MIN -10 dB MIN Information: 2.05/2.2 Tolerances 2.5 Scale 20 N G N G 2:1 All Dimensions in mm Designation -35dB TYP -50 dB TYP -40 dB TYP -35 dB TYP 1500 Vrms A Consider protection memo from DIN 34 1-100 MHz RETURN LOSS: 1-40 MHz 60 MHz 80 MHz 100 MHz CROSSTALK: All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIMR 8C10T, 1x1, INT. MAG., LED. REVERSE LATCH 203419 www.ERNI.com Class MJIM I (2/2) A3