RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 31.12 [1.225] 14.89 [.586] 0.38±0.10 [.015±.004] 21.59 [.850] MAX 32.22±0.20 [1.269±.008] TOP OF PCB LP 8 1 8 13.80 [.543] 1 3.20±0.30 [.126±.012] 13.97 [.550] 10.89 [.429] 25.40±0.13 [1.000±.005] RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 12.70 [.500] 2.54 [.100] 11.43 [.450] 1.27 [.050] ˚0.89±.07 [ ˚.035±.003] X20 1 1 ˚.128±.003] X2 10 10 2.73 [.107] 10.16 [.400] ˚.063±.003] X3 3.68 [.145] ˚1.60±0.07 [ 8.89 [.350] ˚3.25±0.07 [ 2.54 [.100] 25.40 [1.000] ELECTRICAL SCHEMATICS 1000 BASE T - M5B02 ELEKTRISCHES DIAGRAMM PCB 2.73 [.107] 4X 0.01 µF CABLE 4X 75 W TD0+ P1 J1 MX0+ TD0- P2 J2 MX0- OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN TD1+ P3 J3 MX1+ INSERTION LOSS: TD1- P6 J6 MX1- TD2+ P4 J4 MX2+ TD2- P5 J5 MX2- TD3+ P7 J7 MX3+ TD3- P8 J8 MX3- MAGNETICS SPECIFICATIONS @ 25˚C TURNS RATIO: 1-100 MHz 1CT:1CT ±3% -1.1 dB MAX RETURN LOSS: 1-40 MHz -18 dB MIN 60 MHz -14 dB MIN 80 MHz -12 dB MIN 100 MHz -10 dB MIN CROSSTALK (1-100 MHz) -40 dB MIN CMR (1-100 MHz) -40 dB TYP ISOLATION VCC P9 1000pF/2KV GND P10 1500 Vrms SHIELD NOTE 1. SIDE SHIELD TABS IN FRONT 3.68mm (F2) MATERIALS AND FINISH NOTE 2: ONE REAR SHIELD TAB CENTERED HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK NOTE 3: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) SHIELDING: Cu ALLOY, PLATED WITH Ni Information: Tolerances CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8µm [30µin] MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TERMPERATURE: 0˚C TO 70˚C All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 30OCT03 Index Date Designation MOD JACK - MJIM 8C10T, 1X2, INTEGRATED MAGNETICS www.ERNI.com a - All Dimensions in mm SCHEMATIC NUMBER: M5B02 Consider protection memo from DIN 34 TERMINAL FINISH: Sn 2:1 Scale - 203218 MAXM J |