RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT TOP OF PCB LP 14,89 0,586 21,59 0,850 MAX 0,38 ±0,10 0,015 ±0,004 115,95 ±0,20 4,565 ±0,008 114,94 4,525 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 13,80 0,543 1 3,20 ±0,3 0,126 ±0,012 7 X 13,97 = (97,79 3,850 ) 10,89 0,429 109,22 ±0,13 4,300 ±0,005 NOTE NOTE NOTE NOTE 1: THREE REAR GROUND PINS CENTERED (C) 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTON (GF5) 3: SIDE GROUND PINS IN FRONT OF PEG (3,68mm) 4: RoHS COMPLIANT TRANSMISSION REQUIREMENT PART NO. ÜBERTRAGUNGSANFORDERUNG IDENT. NR. T e chnical spe c if icat io ns Stand ard ap p l i c. Standard description Standard description Thickness of plating Thickness of plating Standard description Thickness of plating A sse mb l y p ro ce ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val ue T e st Data Stan d ard ap p l i c. Val ue PBT 30% Me chani cal p ro p e rti e s . C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni El e ctri cal p ro p e rti e s Cre e p ag e / c l e arance d i stan ce s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e ctri c Wi thstand Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Envi ro nme ntal p ro p e rti e s Operation temperature 0 - 70° C 133215 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Shell/shield plating CATEGORY 3/4 Tolerances Information: Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X8 133215 www.ERNI.com c 30.03.2010 Index Date Class MJ (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 107,95 4,250 93,98 3,700 80,01 3,150 68,58 2,700 66,04 2,600 54,61 2,150 52,07 2,050 4 40,64 1,600 1 1 1 1 8 1 1 0,0 7 X5 3 ±0 ,00 0,0 7 8 8 8 0± 8 0 ,0 63 0 ,1 28 ±0 ,00 3 0 ,0 35 0,0 7 8 8 1, 6 8 0 ,8 9± 10,16 0,400 3 ,2 5± 2,54 0,100 24,13 0,950 X3 ±0 ,00 3 X6 38,10 1,500 1 1 1,27 0,050 3,68 0,145 8,89 0,350 10,16 0,400 2,54 0,100 2,73 0,107 2,73 0,107 1:1 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 109,22 ±0,13 4,300 ±0,005 Tolerances Information: Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X8 133215 www.ERNI.com c 30.03.2010 Index Date Class MJ (2/2) A3