81,28 ±0,13 3,200 ±0,005 DETAIL B SCALE 3:1 1,00 ±0,20 0,039 ±0,008 DETAIL A SCALE 4:1 4,90 ±0,20 0,193 ±0,008 3,30 0,130 MAX 87,13 3,430 1,50 ±0,50 0,059 ±0,020 7,60 ±0,20 0,299 ±0,008 28,50 1,122 MAX 5 x 13.97 [.550] = (69,85 2,750 ) 1 8 1 8 1 8 1 8 1 8 1 1 8 1 8 1 8 1 8 1 8 1 8 3,20 ±0,30 0,126 ±0,012 8 25,50 1,004 MAX B A 10,89 0,429 NOTE 1: PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF9) NOTE 2: REAR GROUNDING PIN BETWEEN EVERY OTHER PORT (P) NOTE 3: 3 SIDE GROUND PINS EACH SIDE, STAGGERED (S1) NOTE 4: RoHS COMPLIANT PART NO. TRANSMISSION REQUIREMENT IDENT. NR. ÜBERTRAGUNGSANFORDERUNG T e chnic al spe cif icat io ns Stan d ard ap p l i c. Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro ce ss Packaging Solder temperature Suitable assembly process A p p ro val s UL insulation body UL File No. RoHS compliant UL 94 E145613 Val u e T e st Data Stan d ard ap p l i c. Val u e PA66 Me chani cal p ro p e rti e s . CuSn8 Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector SUS301 (acc.JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e ctri cal p ro p e rti e s Cre e p ag e / cl e arance d i stan ce s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 10s Vo l tag e p ro o f (Di e l e c tri c Wi thstan d Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Envi ro nme n tal p ro p e rti e s Operation temperature 0 - 70° C 133029 133050 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating pin / shielding pin CATEGORY 5 CATEGORY 5E Scale Tolerances Information: 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X6 133802 www.ERNI.com h 25.11.2014 Index Date Class I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 80,01 3,150 88,01 ±0,20 3,465 ±0,008 68,58 2,700 66,04 2,600 0,38 ±0,10 0,015 ±0,004 40,64 1,600 38,10 1,500 24,13 0,950 12,70 0,500 10,16 0,400 1,27 0,050 8 1 1 8 8 1 8 8 8 8 0± 63 ,00 X9 3 8 1 1 ,003 3, 25 2,13 0,084 1, 6 0, 0 ±0 7 ±0,0 X2 8 ±0 0,12 11,40 0,449 8 1 7 0 ,0 35 8,89 0,350 8 1 1 2,13 0,084 2,79 0,110 2,79 0,110 81,28 3,200 1:1 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 9,15 0,360 8 1 4,57 0,180 15,46 0,609 17,19 0,677 8 1 9 0, 0 2,54 0,100 1 1 0, 8 ,07 ±0 TOP OF PCB LP 6 X9 3 ,00 ±0 5,85 0,230 2,54 0,100 2,54 0,100 26,16 1,030 52,07 2,050 Scale Tolerances Information: 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X6 133802 www.ERNI.com h 25.11.2014 Index Date Class I (2/2) A3