Photoelectric sensors FSE 100F6Y01 Through beam fiber optics dimension drawing L 8 8 L 12 7,5 ø 1 2 ø 2,2 1 1,3 3 2,5 ø 3,6 general data photo type through beam sensor actual range Sb 140 mm response time / release time 0,05 ... 5 ms type of head (fiber optic cable) rectangular width / diameter (head) 12 mm height / length (head) 8 mm depth (head) 3 mm material (head) POM bending radius 1 mm cable jacket diameter 1 mm material cable jacket PE material (fiber optic cable) plastic length (fiber optic cable) 2000 mm operating temperature -30 ... +70 °C Sensing distance/response time: For the definitive sensing distance/response time please see table below “fitting fiber optic sensors”. Side view Highly flexible fiber with a min. bending radius. fitting fiber optic sensors actual range Sb (0,05 ms) actual range Sb (0,25 ms) actual range Sb (1 ms) actual range Sb (5 ms) FVDK 67 (standard version) 17 mm (HS) - 110 mm (nL) 140 mm (HP) FVDK 67 (2 adjustable outputs) 17 mm (HS) - 110 mm (nL) 140 mm (HP) FVDK 67 (master/slave) 17 mm (HS) - 110 mm (nL) 140 mm (HP) FVDK 66 (standard version) - 23 mm (FT) 40 mm (nL) - FVDK 66 (master/slave) - 23 mm (FT) 40 mm (nL) - FVDK 22 - - 40 mm (nL) - FVDK 12 - - 40 mm (nL) - FVDK 12 (fast version) 37 mm (HS) - - - FVDK 10 - - 15 mm (nL) - FWDK 84 (analog output) - - 11 mm (nL) - operating modes HS High Speed FT fast nL Standard HP High Sensitivity www.baumer.com 11/6/2015