Photoelectric sensors FSE 200C1004 Through beam fiber optics dimension drawing 0,5 13,5 L 2 2 ø 1 M3 ø 2 SW 5,5 13,5 17 17 L general data photo particular characteristics standard type through beam sensor actual range Sb 340 mm response time / release time 0,05 ... 5 ms type of head (fiber optic cable) cylindrical threaded (axial) width / diameter (head) 3 mm height / length (head) 17 mm material (head) brass bending radius 8 mm cable jacket diameter 1 mm material cable jacket PE material (fiber optic cable) plastic length (fiber optic cable) 2000 mm operating temperature -30 ... +70 °C Sensing distance/response time: For the definitive sensing distance/response time please see table below “fitting fiber optic sensors”. fitting fiber optic sensors actual range Sb (0,05 ms) actual range Sb (0,25 ms) actual range Sb (1 ms) actual range Sb (5 ms) FVDK 67 (standard version) 40 mm (HS) - 290 mm (nL) 340 mm (HP) FVDK 67 (2 adjustable outputs) 40 mm (HS) - 290 mm (nL) 340 mm (HP) FVDK 67 (master/slave) 40 mm (HS) - 290 mm (nL) 340 mm (HP) FVDK 66 (standard version) - 70 mm (FT) 125 mm (nL) - FVDK 66 (master/slave) - 70 mm (FT) 125 mm (nL) - FVDK 22 - - 100 mm (nL) - FVDK 12 - - 100 mm (nL) - FVDK 12 (fast version) 94 mm (HS) - - - FVDK 10 - - 50 mm (nL) - FWDK 84 (analog output) - - 28 mm (nL) - operating modes HS High Speed FT fast nL Standard HP High Sensitivity www.baumer.com 11/6/2015