Photoelectric sensors FSE 200C6Y02 Through beam fiber optics dimension drawing 3 16 x ø 0,35 1,5 16 17 25 12 4 L 15 x 1.4 = 21 1,4 2 x 3,2 ø 12 2, 2 20 general data photo particular characteristics array (fine light barrier) type through beam sensor actual range Sb 790 mm response time / release time 0,05 ... 5 ms type of head (fiber optic cable) rectangular width / diameter (head) 20 mm height / length (head) 25 mm depth (head) 3 mm material (head) aluminum bending radius 4 mm cable jacket diameter 2,2 mm material cable jacket PE material (fiber optic cable) plastic length (fiber optic cable) 2000 mm operating temperature -30 ... +70 °C Sensing distance/response time: For the definitive sensing distance/response time please see table below “fitting fiber optic sensors”. fitting fiber optic sensors actual range Sb (0,05 ms) actual range Sb (0,25 ms) Reliably detects small, thin or vibrating workpieces in a light curtain of 21 mm. actual range Sb (1 ms) actual range Sb (5 ms) FVDK 67 (standard version) 85 mm (HS) - 600 mm (nL) 790 mm (HP) FVDK 67 (2 adjustable outputs) 85 mm (HS) - 600 mm (nL) 790 mm (HP) FVDK 67 (master/slave) 85 mm (HS) - 600 mm (nL) 790 mm (HP) FVDK 66 (standard version) - 150 mm (FT) 260 mm (nL) - FVDK 66 (master/slave) - 150 mm (FT) 260 mm (nL) - FVDK 22 - - 200 mm (nL) - FVDK 12 - - 200 mm (nL) - FVDK 12 (fast version) 188 mm (HS) - - - FVDK 10 - - 100 mm (nL) - FWDK 84 (analog output) - - 55 mm (nL) - operating modes HS High Speed FT fast nL Standard HP High Sensitivity www.baumer.com 11/6/2015