2 1 TO -24 7 D3PAK 1 - Cathode 2 2 - Anode 1 1 2 1 2 APT30DS60B(G) 600V 20A APT30DS60S(G) 600V 20A *G Denotes RoHS Compliant, Pb Free Terminal Finish. 2-300V HIGH FREQUENCY SOFT RECOVERY RECTIFIER DIODES IN SERIES PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package or • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers Surface Mount D3PAK Package • Low Leakage Current MAXIMUM RATINGS Density All Ratings: TC = 25°C unless otherwise specified. Symbol Characteristic / Test Conditions VR Maximum D.C. Reverse Voltage APT30DS60B_S(G) VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 79°C, Duty Cycle = 0.5) 20 RMS Forward Current (Square wave, 50% duty) 26 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 320 IF(RMS) IFSM TJ,TSTG TL 600 Volts Amps -55 to 150 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. UNIT STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V TYP MAX IF = 30A 3.2 4.0 IF = 60A 4.2 IF = 30A, TJ = 125°C 2.4 Volts VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 APT Website - http://www.advancedpower.com 43 UNIT µA pF 8-2004 VF MIN 053-3007 Rev B Symbol APT30DS60B_S(G) APT30DS60B_S DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions MIN TYP MAX UNIT trr Reverse Recovery Time I = 1A, di /dt = -100A/µs, V = 30V, T = 25°C F F R J - 17 trr Reverse Recovery Time - 24 Qrr Reverse Recovery Charge - 29 - 2 - 49 ns - 180 nC - 6 - 28 ns - 320 nC - 21 Amps MIN TYP IRRM Reverse Recovery Time Qrr Reverse Recovery Charge IF = 30A, diF/dt = -200A/µs Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 400V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 125°C IF = 30A, diF/dt = -1000A/µs Maximum Reverse Recovery Current VR = 400V, TC = 125°C ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance WT Torque MAX 0.95 40 Package Weight oz 5.9 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.80 0.7 0.60 0.5 Note: PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 1.00 0.3 0.1 0 SINGLE PULSE 0.05 10-5 Duty Factor D = t1/t2 10-4 10-3 Peak TJ = PDM x ZθJC + TC 10-2 10-1 1.0 10 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL 8-2004 Junction temp (°C) 053-3007 Rev B t1 t2 0.20 Power (watts) 0.193 °C/W 0.00442 J/°C 0.589 °C/W 0.0733 J/°C 0.191 °C/W 1.19 J/°C Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL °C/W 0.22 Maximum Mounting Torque 0.40 UNIT TYPICAL PERFORMANCE CURVES 60 TJ = 125°C 40 TJ = 25°C 20 TJ = -55°C 0 1 2 3 4 5 6 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 60A 300 30A 250 200 150 15A 100 50 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 15A 30 20 10 TJ = 125°C VR = 400V 60A 20 15 30A 10 15A 5 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change trr Qrr 25 1.0 20 trr IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs) 30A 40 30 1.2 0.8 IRRM 15 10 0.4 Qrr 0.2 0.0 60A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 1.4 0.6 50 25 TJ = 125°C VR = 400V 350 TJ = 125°C VR = 400V 0 0 400 Qrr, REVERSE RECOVERY CHARGE (nC) trr, REVERSE RECOVERY TIME (ns) TJ = 150°C IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) 80 APT30DS60B_S(G) 60 100 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 5 0 Duty cycle = 0.5 TJ = 150°C 25 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 200 150 8-2004 100 50 0 .4 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-3007 Rev B CJ, JUNCTION CAPACITANCE (pF) 250 APT30DS60B_S(G) APT30DS60B_S(G)(G) Vr diF /dt Adjust +18V APT6017BLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions 3 TO-247 Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) e1 SAC: Tin, Silver, Copper D PAK Package Outline 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 15.85 (.624) 16.05(.632) 0.40 (.016) 0.65 (.026) 053-3007 Rev B 8-2004 4.50 (.177) Max. 1.65 (.065) 2.13 (.084) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) 1.01 (.040) 1.40 (.055) Anode 2.21 (.087) 2.59 (.102) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) 13.30 (.524) 13.60(.535) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 19.81 (.780) 20.32 (.800) 1.00 (.039) 1.15(.045) 5.38 (.212) 6.20 (.244) 20.80 (.819) 21.46 (.845) 0.40 (.016) 0.79 (.031) e3 100% Sn Plated Anode (Isolated) Cathode Dimensions in Millimeters (Inches) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Isolated) and Leads are Plated