600V 75A APT75DQ60B APT75DQ60S APT75DQ60BG* APT75DQ60SG* ® *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE (B) PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • PFC • Avalanche Energy Rated -24 7 D3PAK 1 2 • Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current TO 2 1 (S) 2 1 • Increased System Power Density 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions UNIT 600 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 108°C, Duty Cycle = 0.5) IF(RMS) APT75DQ60B(G)_S(G) 75 RMS Forward Current (Square wave, 50% duty) 117 IFSM Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 600 EAVL Avalanche Energy (1A, 40mH) TJ,TSTG TL Amps 20 mJ -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 75A 2.0 2.5 IF = 150A 2.4 IF = 75A, TJ = 125°C 1.7 VR = 600V APT Website - http://www.advancedpower.com Volts 25 VR = 600V, TJ = 125°C 500 110 UNIT µA pF 8-2005 VF Characteristic / Test Conditions 053-4209 Rev C Symbol APT75DQ60B(G)_S(G) DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Reverse Recovery Time Qrr Reverse Recovery Charge IF = 75A, diF/dt = -200A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 400V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 75A, diF/dt = -200A/µs IF = 75A, diF/dt = -1000A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current MIN TYP MAX UNIT - 29 - 31 - 55 - 4 - 140 ns - 650 nC - 9 - 90 ns - 1300 nC - 27 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC WT Torque Characteristic / Test Conditions MAX UNIT .34 °C/W Junction-to-Case Thermal Resistance Package Weight 0.22 oz 5.9 g Maximum Mounting Torque 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. D = 0.9 0.30 0.25 0.7 0.20 0.5 Note: 0.15 0.3 0.10 t2 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC 0.1 SINGLE PULSE 0.05 10 -5 10 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 8-2005 RC MODEL 053-4209 Rev C t1 t 0.05 0 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.35 Junction temp (°C) 0.129 0.0107 0.211 0.120 Power (watts) Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL 180 180 160 160 140 120 100 TJ = 125°C 80 60 TJ = 25°C TJ = 175°C 40 TJ = -55°C 20 0 0 0.5 1 1.5 2 2.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 1800 T = 125°C J V = 400V 1600 R 1400 150A 1200 75A 1000 800 37.5A 600 400 200 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change trr, REVERSE RECOVERY TIME (ns) 200 140 75A 120 37.5A 100 80 60 40 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 30 T = 125°C J V = 400V 25 37.5A 20 15 10 75A 5 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change Qrr IRRM 0.8 trr 0.6 0.4 Qrr Duty cycle = 0.5 T = 175°C J 120 trr 1.0 150A R 0 100 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) R 140 1.2 T = 125°C J V = 400V 150A 0 1.4 80 60 40 20 0.2 0.0 APT75DQ60B(G)_S(G) 20 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) TYPICAL PERFORMANCE CURVES 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 500 400 8-2005 300 200 100 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-4209 Rev C CJ, JUNCTION CAPACITANCE (pF) 600 APT75DQ60B(G)_S(G) Vr diF /dt Adjust +18V APT60GT60BR 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 1 4 6 Zero 5 5 Qrr - Area Under the Curve Defined by IRRM and trr. 6 diM/dt - Maximum Rate of Current Increase During the Trailing Portion of trr. 3 0.25 IRRM Slope = diM/dt 2 Figure 10, Diode Reverse Recovery Waveform and Definitions 3 D PAK Package Outline TO-247 Package Outline 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 20.80 (.819) 21.46 (.845) Cathode 8-2005 053-4209 Rev C e3 100% Sn Cathode (Heat Sink) e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 0.40 (.016) 0.65 (.026) 4.50 (.177) Max. 19.81 (.780) 20.32 (.800) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 1.00 (.039) 1.15(.045) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) Anode 2.21 (.087) 2.59 (.102) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) 13.30 (.524) 13.60(.535) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 0.40 (.016) 0.79 (.031) 15.85 (.624) 16.05(.632) Anode Cathode Dimensions in Millimeters (Inches) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated