PULSE J0C

PULSEJACK
TM
Surface Mount 1x1
Description:
10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics
Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC).
Features and Benefits:
RoHS-5 peak reflow temperature rating 235°C
RoHS-6 peak reflow temperature rating 245°C
J0C SMT product, reduced size and low cost alternative
to JV series
SMT Contacts
JV0
Electrical Performance Summary:
Meets IEEE 802.3 specification
High performance for maximum EMI suppression
J0C
Minimum 1500Vrms isolation per IEEE 802.3 requirement
J30
Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
RoHS-5 3
Compliant
Part No.
J0C-0003
J0C-0004
J0C-0005
J0C-0006
JV006I21
JV011I21
JV026I21
J3006G21D
J3011G21D
J3018G21K
J3026G01D
J3026G21D
_
Turns
Ratios
RoHS-6 4
Compliant
Part No.
J0C-0003NL
J0C-0004NL
J0C-0005NL
J0C-0006NL
JV006I21NL
JV011I21NL
JV026I21NL
J3006G21DNL
J3011G21DNL
_
J3026G01DNL
J3026G21DNL
JX30-0005NL5
Tab
Option
Up/Down
TX
RX
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CTS:1
1CT:1
1CT:1
1CTS:1.414
1CTS:1
1CTS:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
1CT:1
Down
Down
Down
Down
Down
Down
Down
Up
Up
Up
Up
Up
Up
LEDs 1
L/R
No
No
No
No
No
No
No
G/Y
G/Y
G/G
G/Y
G/Y
G/Y
BST
Circuit
No
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Insertion
Loss
TX/RX
EMI
Finger (dB MAX)
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Return Loss
(dB MIN)
100Ω (± 15Ω)
Common Mode Hipot
Rejection
(Vrms)
(dB MIN)
(MIN)
Crosstalk
(dB MIN)
1-65
MHz
1-10
MHz
30
MHz
60-80
MHz
1-10
MHz
30-60
MHz
60-100
MHz
1-50
MHz
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-1.0
-18
-18
-18
-18
-20
-20
- 20
-20
-20
-20
-20
-20
-20
-14
-14
-14
-14
-16
-16
-16
-16
-16
-16
-16
-16
-16
-10
-10
-10
-10
-12
-12
-12
-12
-12
-11.5
-12
-12
-12
-35
-35
-35
-35
-40
-40
-40
-40
-40
-40
-40
-40
-40
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-20
-20
-20
-20
-30
-30
-30
-30
-30
-30
-30
-30
-30
50-130 @60 Hz
MHz
1 MIN
-20
-20
-20
-20
-20
-20
-20
-20
-20
-20
-20
-20
-20
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
NOTES:
1. LEDs Left/Right: G = green; Y = yellow.
4. RoHS-6 - Product does not contain 5 out of the 6 banned substances
2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T).
specified in the RoHS directive. Some internal connections may contain
3. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in
lead in high temperature solder (solder alloys containing more than 85% lead).
the RoHS directive. Product contains lead in applications considered as solders. 5. Extended Temperature: -40° to 85° C
RJ45 Durability Testing Rating
Part Number
Mating Force
(MAX)
Unmating Force
(MAX)
Durability
Plug to Jack
Retention (MIN)
J0C/JV/J3 Series
5 lbs./2.268 kgs.
5 lbs./2.268 kgs.
750 Insertions
20 lbs./9.072 kgs.
RJ45 Material Specification
Part
Number
J0C/JV/J3
Series
Material
Shield
Finish
Brass
20-40µ inches thick nickel
over Brass
Material
Contact
3
Plating Area
Solder Area
Phosphor
Bronze
(X)µ inches gold over
30-80µ inches nickel
75-300µ inches tin-lead over
30-80µ inches nickel
Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements.
2. MSL=Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5).
3. (X)=30µ inches gold for JV and J30 platforms and 15µ inches gold for J0C platform.
5
Housing
Material
Specification
High Temp.
Thermoplastic
UL 94 V-0
2
MSL
Rating
14
4. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1.
5. NL parts are tin matte finish over nickel.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
1
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
J0C Platform Schematics
J0C-0003/4
J0C-0005/6
TD+ 1
TD+ 1
1 TX+
1 TX+
CT 4
CT 4
75
CT 5
RD- 6
6 RX-
1CT : 1
RECEIVE
NC 7
RD+ 3
3 RX+
CT 5
75
RD- 6
6 RX-
1CT : 1
RECEIVE
4
4
NC 7
5
75
5
7
7
GND* 8
2 TX-
1CT : 1
TRANSMIT
CABLE SIDE
3 RX+
RD+ 3
PCB SIDE TO PHY
1CT : 1
TRANSMIT
TD- 2
2 TX-
CABLE SIDE
PCB SIDE TO PHY
TD- 2
GND 8
8
0.001mF
NOTE: Connect GND to PCB ground.
*Connecting pin 8 to Ground makes J00-0042/46/64/66
footprint compatible to J00-0014/45/61/65.
75
8
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
2
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
JV Platform Schematics
JV006
CABLE
P C B side to P H Y
CABLE
P C B side to P H Y
JV011
CABLE
P C B side to P H Y
JV026
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
3
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
J3 Platform Schematics
J3006
CABLE
P C B side to P H Y
CABLE
P C B side to P H Y
J3011
JX30-0005NL
J3018/J3026
P C B side to P H Y
CABLE
CABLE
J3018
P C B side to P H Y
J3026
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
4
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
J0C Platform Mechanicals
J0C-0004/6 (J0C-0003/5 - Same platform without EMI Fingers)
EMI Fingers
EMI Fingers
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
5
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
JV Platform Mechanicals
JV Series
JV0XX121
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
6
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
J3 Platform Mechanical
J3 Series
JX30-0005NL
& J3026G21D
With EMI
Tabs
J30XXGX1D
Date Code
Country of Origin
J30-0005NL
J3026G21D
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
7
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
J0C Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation of
a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure to
surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004")
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JC0 series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified. Please add the suffix "T" for Tape & Reel orders
(ex: J0C-0003T). Add the suffix “NL” for RoHS compliant parts
(ex: J0C-0003NL for Trays and J0C-0003NLT for Tape & Reel).
J0C-003/4 Connector
10/100
IC PHY
VCC
0.01 µf
8
NC
7
RX-
TPOR 50W * 2
0.01 µf
TPOR +
TPOP -
NC
50W * 2
TPIP +
6
NC
5
TXCT
4
RX+
RX 1:1
3
TX-
2
TX+
1
0.01 µf
Shield PCB PAD
8
7
6
5
4
3
2
1
RJ45
TX 1:1
Shield PCB PAD
0.01 µf
Analog GND
Chassis GND
NOTE: Connector design not to scale
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50Ω
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
8
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
JV Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation of
a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure to
surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004")
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JV series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified. Please add the suffix "T" for Tape & Reel orders
(ex: JV006I21T). Add the suffix “NL” for RoHS compliant parts
(ex: JV006I21NL for Trays and JV006I21NLT for Tape & Reel).
JV006I21 Connector
10/100
IC PHY
VCC
0.01 µf
TPOR -
50W * 2
0.01 µf
TPOR +
TPOP -
50W * 2
TPIP +
Shield PCB PAD
NC
6
RX-
5
RX+
RX 1:1
4
TX-
3
TX+
2
TXCT
1
0.01 µf
8
7
6
5
4
3
2
1
RJ45
TX 1:1
Shield PCB PAD
0.01 µf
Analog GND
Chassis GND
NOTE: Connector design not to scale
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50Ω
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
9
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
J0C Packaging Specifications
J0C Series
Weight..............7.07 grams
Tape & Reel ............90/reel
Tray ........................80/tray
Tape ...................44x32mm
Tube ......................25/tube
Tape and Reel Specification
Tray Specification
USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
10
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
JV Packaging Specifications
JV Series
Weight ...............6.6 grams
Tape & Reel ..........150/reel
Tray ........................45/tray
Tape ...................44x32mm
Tape and Reel Specification
Tray Specification
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
11
J409.G (12/07)
PULSEJACK
TM
Surface Mount 1x1
J3 Packaging Specifications
J3 Series
Weight ...............8.1 grams
Tape & Reel ............75/reel
Tray ........................45/tray
Tape ...................56x32mm
Tape and Reel Specification
Tray Specification
For More Information:
Pulse Worldwide
Headquarters
Pulse
Europe
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 7032 7806 0
Fax: 49 7032 7806 12
Pulse China Headquarters
Pulse North China
Pulse South Asia
Pulse North Asia
B402, Shenzhen
Tech-Innovation International
Tenth Kejinan Rd.
High-Tech Industrial Park
Nanshan District, Shenzhen
China
Tel: 86 755 33966678
Fax: 86 755 33966700
Room 1503
XinYin Building
No. 888 YiShan Rd.
Shanghai 200233
China
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
No. 26
Kao Ching Rd.
Yang Mei Chen
Tao Yuan Hsien
Taiwan, R. O. C.
Tel: 86 21 54643211/2
Fax: 86 21 54643210
Tel: 65 6287 8998
Fax: 65 6280 0080
Tel: 886 3 4641811
Fax: 886 3 4641911
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved.
www.pulseeng.com
J409.G (12/07)