STARJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com Description: 10/100 Base-TX RJ45 1x1 Tab-DOWN 8-pin Integrated Magnetics Connector, designed to support high volume cost-conscious consumer applications such as: ADSL modems, Cable modems, STB and Video on Demand. Features and Benefits: RoHS-5 peak wave solder temperature rating 235°C RoHS-6 peak wave solder temperature rating 260°C Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Electrical Performance Summary: Meets IEEE 802.3 specification 350µH minimum OCL with 8mA bias current High performance for Max EMI suppression for cost-conscious applications 10 Base-T Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C RoHS-5 4 Compliant Part No. J00-0025 3 J00-0051 3 J00-0062 3 J00-0063 3 RoHS-6 5 Compliant Part No. Data Rate J00-0025 NL3 J00-0051NL 3 J00-0062 NL3 J00-0063NL 3 10BT 10BT 10BT 10BT Turns Ratios EMI 1 TX RX 1CT:2.5 1CT:2.5 1CT:2.5 1CT:2.5 1CT:1 1CT:1 1CT:1 1CT:1 Fingers LEDs 2 (L/R) BST Yes Yes No No None G/Y None G/Y No No No No Insertion Loss (dB MAX) Return Loss (dB MIN) 100Ω ± 15Ω Crosstalk (dB MIN) Common Mode Rejection (dB MIN) 1-10MHz 1-10MHz 1-10MHz 5MHz @60Hz 1 MIN -1 -1 -1 -1 -15 -15 -15 -15 -30 -30 -30 -30 -25 -25 -25 -25 1500 1500 1500 1500 Common Mode Rejection (dB MIN) Hipot (Vrms) Hipot (Vrms) 10/100 Base-T Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C 4 5 RoHS-5 Compliant Part No. RoHS-6 Compliant Part No. Data Rate J00-0014 J00-0042 J00-0045 J00-0046 J00-0061 J00-0064 J00-0065 J00-0066 J00-0014NL J00-0042NL J00-0045NL J00-0046NL J00-0061NL J00-0064NL J00-0065NL J00-0066NL 100BT 100BT 100BT 100BT 100BT 100BT 100BT 100BT Turns Ratios EMI 1 LEDs 2 Fingers (L/R) TX RX 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 No No No No Yes Yes Yes Yes None None G/Y G/Y None None G/Y G/Y BST Insertion Loss (dB MAX) Return Loss (dB MIN) 100Ω ± 15Ω 1-65MHz 1-10MHz -1 -1 -1 -1 -1 -1 -1 -1 -18 -18 -18 -18 -18 -18 -18 -18 Yes No Yes No Yes No Yes No NOTES: 1. For an explanation of EMI fingers, refer to the mechanical drawing page. 2. LEDs Left/Right: G=green, Y=yellow. 3. IEEE802.3i (10Base-T) standard does not require these parts to achieve 350µH minimum OCL with 8mA bias current for 10Base-T parts. Crosstalk (dB MIN) 10-30MHz 30-60MHz 60-80MHz -14 -14 -14 -14 -14 -14 -14 -14 -12 -12 -12 -12 -12 -12 -12 -12 -10 -10 -10 -10 -10 -10 -10 -10 1-30MHz 30-60MHz 60-100MHz 1-50MHz -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -30 -30 -30 -30 -30 -30 -30 -30 -20 -20 -20 -20 -20 -20 -20 -20 50-150MHz @60Hz 1 MIN -15 -15 -15 -15 -15 -15 -15 -15 1500 1500 1500 1500 1500 1500 1500 1500 4. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Product contains lead in applications considered as solders. 5. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Some internal connections may contain lead in high temperature solder (solder alloys containing more than 85% lead). RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) J00 Series 5lbs./2.268kgs. 5lbs./2.268kgs. 750 Insertions 20lbs./9.072kgs. RJ45 Material Specification Part Number J00 Series Shield Material Brass Finish 20-40m inches Nickel over 10-20m inches Brass Contact Housing Material Plating Area Solder Area 3 Material Specification MSL2 Rating Phosphor Bronze Nickel underplating and selective gold plating 15µ inches 120µ inches Sn90/Pb10 over 50µ inches nickel Thermoplastic UL 94 V-0 1 NOTES: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL - Moisture Sensitivity Level class limits = 1 to 5 (Highest: 1; Lowest: 5). 3. RoHS-6 parts are tin matte finish over nickel. USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com J414.C (6/06) STARJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J00-00XX Series Mechanicals Part Number Location EMI Fingers .640 16,26 .290 7,37 .125 .020 3,18 0,51 .545 13,84 LEFT LED .850 21,59MAX BACK Patent Pending .095 .020 2,41 0,51 HOUSING POST FRONT SIGNAL PINS RIGHT LED .135 .020 3,43 0,51 .140 3,56 SHIELD PIN FRONT VIEW .425 10,80 SIDE VIEW TM JXXXXXXXX Date Code Country of Origin Connector Marking (An example - parts are marked on the top or end surface as shown) .620 15,75 .498 12,65 4X R .010 MAX R 2.54 0,25 6,45 .660 16,76 .450 11,43 .398 10,11 .100 2,54 FRONT 4X 2X .133 3,38 .193 4,90 12 11 10 9 .120 3,05 7 8 .100 2,54 5 6 3 4 BACK .350 8,89 .024 0,61 .560 14,22 .010 TOP OF PCB 0,25 TO BOTTOM OF OPENING .040 1,02 .128 3,25 HOUSING POST 2X .064 SHIELD PIN 1,63 .250 6,35 1 2 .050 1,27 8X .035 0,89 .003 0,08 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Viewed from PCB Component side LED Configuration Green / Yellow LED Specification - (LEDs without internal resistors) 9 10 Left LED 12 11 Right LED Standard LED Wavelength Forward* V(MAX) (TYP) Yellow Green 585 nm 565 nm 2.5 V 2.5 V 2.1 V 2.2 V * Assumes bias current = 20mA USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com J414.C (6/06) STARJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J00-00XX Series Electrical Schematics J00-0014/45/61/65 J00-0042/46/64/66 TD+ 1 1 TX+ TD+ 1 CT 4 CT 4 75 3 RX+ RD+ 3 CT 5 RD- 6 6 RX- 1CT : 1 RECEIVE PCB SIDE TO PHY 1CT : 1 TRANSMIT TD- 2 RD+ 3 3 RX+ CT 5 75 RD- 6 4 5 7 2 TX- 1CT : 1 TRANSMIT 6 RX- 1CT : 1 RECEIVE NC 7 4 75 7 GND* 8 CABLE SIDE 2 TX- CABLE SIDE PCB SIDE TO PHY TD- 2 1 TX+ 5 7 8 *Connecting pin 8 to Ground makes J00-0042/46/64/66 footprint compatible to J00-0014/45/61/65. CHS GROUND 8 0.001mF 75 8 NOTE: Connect CHS GND to PCB ground. J00-0025/51/62/63 TD+ 1 1 TX+ CT 7 1CT : 2.5 TRANSMIT 2 TX3 RX+ RD+ 3 CT 8 RD- 6 6 RX- 1CT : 1 RECEIVE 4 CABLE SIDE PCB SIDE TO PHY TD- 2 4 5 7 5 8 For More Information: Pulse Worldwide Headquarters Pulse Northern Europe Pulse Southern Europe Pulse Pulse North China China Headquarters Room 1503 12220 World Trade Drive San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 No. 1 Industrial District Changan, Dongguan China TEL: 86 769 85538070 FAX: 86 769 85538870 XinYin Building No. 888 YiShan Road Shanghai 200233 China TEL: 86 21 54643211/2 FAX: 86 21 54643210 Pulse South Asia Pulse North Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Road Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: 886 3 4641811 FAX: 886 3 4641911 TEL: 65 6287 8998 FAX: 65 6280 0080 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2006. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com J414.C (6/06)