FTZ6.8E Diodes Zener diode FTZ6.8E !External dimensions (Units : mm) !Applications Noise suppression on single line Constant voltage control 2.9±0.2 1.1+0.2 −0.1 1.9±0.2 0.8±0.1 0.95 0.95 !Features 1) Small surface mounting type. (SMD5) 2) Multiple diodes with common anode configuration. 3) High reliability. 0.3 +0.1 −0.05 2.8±0.2 D6F 1.6+0.2 −0.1 0.3∼0.6 0∼0.1 +0.1 0.15 −0.06 (All leads have the same dimensions.) !Construction Silicon epitaxial planar ROHM : SMD5 EIAJ : SC-74A JEDEC : − !Circuit !Absolute maximum ratings (Ta=25°C) Parameter Power dissipation∗ Symbol Limits Unit P 200 mW Junction temperature Tj 125 ˚C Storage temperature Tstg −55∼+125 ˚C ∗ Total of 4 elements !Electrical characteristics (Ta=25°C) Symbol Min. Typ. Max. Zener voltage VZ 6.47 − 7.14 V IZ=5mA Reverse current IR − − 0.5 µA VR=3.5V Operating resistance Zz − − 40 Ω IZ=5mA Rising operating resistance ZZK − − 60 Ω IZ=0.5mA Parameter Unit Conditions FTZ6.8E Diodes !Others Item Standard 1 IEC1000-4-2 Device configuration Charge/discharge capacitance : 200 pF ± 10% Discharge resistance : 400 Ω ± 10% Charge/discharge capacitance : 150 pF Discharge resistance : 330 Ω Judgment contents 5 repetitions No spark or smoke emitted No element destruction No malfunction 10 repetitions No malfunction Contact : ± 8 kV Suspended : ± 15 kV : ± 25 kV : ± 20 kV : ± 8 kV !Electrical characteristic curves (Ta=25°C) −20°C 25°C 300 70°C POWER DISSIPATION : Pd (mW) ZENER CURRENT : Iz (A) 100m 10m 1m 100µ 10µ 1µ 200 100 100n 2 3 4 5 6 7 ZENER VOLTAGE : Vz (V) Fig.1 Zener characteristics 8 0 0 25 50 75 100 125 AMBIENT TEMPERATURE : Ta (˚C) Fig.2 Derating curve 200 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0