2SB1566 Transistors For Power Amplification (−60V, −3A) 2SB1566 zStructure PNP Silicon Epitaxial Planar Transistor zExternal dimensions (Unit : mm) TO-220FN 4.5 φ3.2 2.8 8.0 1.2 1.3 14.0 5.0 15.0 zFeatures 1) Low VCE (sat). 2) Wide SOA. 12.0 10.0 0.8 (1)Base 2.54 (2)Collector 2.54 0.75 2.6 (1) (2) (3) (3)Emitter zApplications Relay drive DC-DC converter Stabilized power supply zComplements zAbsolute maximum ratings (Ta=25°C) Limits Unit Collector-base voltage VCBO −60 V Collector-emitter voltage VCEO −50 V Emitter-base voltage Collector current VEBO −5 V DC IC −3 A(DC) Pulse ICP −4.5 Collector power dissipation NPN 2SD2395 zPackaging specifications and hFE Symbol Parameter PNP 2SB1566 PC Package hFE 2SB1566 A(Pulse)∗1 2 W(Ta=25°C) 25 W(Tc=25°C) Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C Taping − Code Type Basic ordering unit (pieces) 500 EF hFE values are classified as follows: Item hFE E 100 to 200 F 160 to 320 ∗1 Pw=100ms, single pulse zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Collector-emitter breakdown voltage BVCEO −50 − − V Collector-base breakdown voltage BVCBO −60 − − V IC=−50µA Emitter-base breakdown voltage BVEBO −5 − − V IE=−50µA Collector cutoff current ICBO − − −1.0 µA VCB=−60V Emitter cutoff current IEBO − − −1.0 µA VEB=−4V Collector-emitter saturation voltage VCE(sat) − − −1.0 V IC/IB=−2A/−0.2A ∗1 Base-emitter saturation voltage VBE(sat) − − −1.5 V IC/IB=−2A/−0.2A ∗1 hFE 100 − 320 − VCE=−3V, IC=−0.5A fT − 60 − Cob − 40 − DC current gain Transition frequency Collector output capacitance Conditions IC=−1mA MHz VCE=−5V, IE=0.5A, f=30MHz pF ∗1 VCB=−10V, IE=0A, f=1MHz ∗1 Pulse test 1/1 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1