DP52-0005 Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V3 Features • Small Size and Low Profile • Superior Repeatability • Passbands 824 – 960 MHz and 1850 – 1990 MHz • Passbands 880 – 960 MHz and 1700 – 1900 MHz • Typical Passband Insertion Loss: 0.5 dB • 2 Watt Power Handling • Low Cost • SOT-26 Package Functional Block Diagram1 GND GND PCS (IN/OUT) 4 5 6 Description HPF M/A-COM’s DP52-0005 is an IC-based Monolithic Diplexer in a low cost SOT-26 plastic package. This Diplexer is ideally suited for applications where small size, low insertion loss, superior repeatability, and low cost are required. Typical applications include AMPS/PCS and GSM/DCS dual mode portable devices. LPF The DP52-0005 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 2 1 3 AMPS (IN/OUT) ANTENNA GND 1. All unused pins must be RF and DC grounded. Pin Configuration Ordering Information Part Number Package DP52-0005 Bulk Packaging DP52-0005-TR 1000 piece reel DP52-0005SAM Sample Test Board Pin No. Function Pin No. Function 1 AMPS IN/OUT 4 PCS IN/OUT 2 GND 5 GND 3 ANTENNA 6 GND Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DP52-0005 Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V3 880 – 960 / 824 – 960 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Passband Insertion Loss dB — 0.7 0.9 Stopband Isolation dB 17 19 — Passband VSWR — — 1.3:1 1.5:1 1700 – 1900 / 1850 – 1990 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Passband Insertion Loss dB — 0.6 0.8 Stopband Isolation dB 17 20 — Passband VSWR — — 1.3:1 1.5:1 Absolute Maximum Ratings 2.3 2. 3. Parameter Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Recommended PCB Configuration Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DP52-0005 Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V3 Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency SOT-26† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.