MAFLCC0006 Low Cost SMT Low Pass Filter DC – 1000 MHz Rev. V2 Features • • • • • • • • • • Small Size and Low Profile Superior Repeatability Typical Insertion Loss 0.5 dB Typical Rejection 20 dB 2 Watt Power Handling Lead-Free SO-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of FL07-0001-G Functional Block Diagram Description M/A-COM’s MAFLCC0006 is an IC-based monolithic low pass filter in a low cost SOIC-8 plastic package. This filter is ideally suited for applications where small size, low cost, and low loss are required. Typical applications include base station switching networks and portable phones where size and PCB real estate are at a premium. Available in tape and reel. The MAFLCC0006 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1. 2. Ordering Information All unused pins must be RF and DC grounded. Pins 1 and 4 are thermal ground contacts. Pin Configuration Part Number Package MAFLCC0006 Bulk Packaging MAFLCC0006-TR 1000 piece reel MAFLCC0006-TB Sample Test Board Pin No. Function Pin No. Function 1 GND 5 GND 2 RF IN 6 GND 3 GND 7 RF OUT 4 GND 8 GND Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAFLCC0006 Low Cost SMT Low Pass Filter DC – 1000 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss: DC – 1000 MHz dB — 0.5 1.0 VSWR: DC – 1000 MHz — — 1.3:1 1.6:1 Rejection: 1800 – 3500 MHz 2000 – 3000 MHz dB dB 15 20 20 27 — — Absolute Maximum Ratings 3,4 3. 4. Parameter Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Typical Performance Curves Insertion Loss vs. Frequency VSWR vs. Frequency 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAFLCC0006 Low Cost SMT Low Pass Filter DC – 1000 MHz Rev. V2 Lead-Free, SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.