PD-94289 16CYQ045C SCHOTTKY RECTIFIER HIGH EFFICIENCY SERIES 16 Amp, 45V Major Ratings and Characteristics Characteristics Description/Features 16CYQ045C Units IF(AV) 16 A VRRM (Per Leg) 45 V IFSM @ tp = 8.3ms half-sine (Per Leg) 150 A 0.71 V VF @ 16Apk, TJ =125°C (Per Leg) The 16CYQ045C center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of hirel environments. It is packaged in the hermetic isolated TO-257AA package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonent power converters. Full MIL-PRF-19500 quality conformance testing is available on source control drawings to TX, TXV and S quality levels. TJ, Tstg Operating and storage -55 to 150 °C • • • • • Hermetically Sealed Ceramic Eyelets Low Forward Voltage Drop High Frequency Operation Guard Ring for Enhanced Ruggedness and Long term Reliability • Lightweight CASE STYLE 1 2 3 ANODE COMMONANODE CATHODE IR Case Style TO-257AA www.irf.com 1 07/31/01 16CYQ045C Voltage Ratings Part number VR 16CYQ045C Max. DC Reverse Voltage (V) (Per Leg) 45 VRWM Max. Working Peak Reverse Voltage (V) (Per Leg) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current Limits Units Conditions 16 A 50% duty cycle @ TC = 136°C, square waveform 150 A @ tp = 8.3 ms half-sine Limits Units 0.64 V @ 8.0A 0.74 V @ 16A See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive Surge Current (Per Leg) Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) See Fig. 1Q I RM Conditions TJ = -55°C 0.57 V @ 8.0A 0.71 V @ 16A 0.49 V @ 8.0A 0.68 V @ 16A Max. Reverse Leakage Current 0.1 mA (Per Leg) See Fig. 2Q 6.4 mA TJ = 100°C 30 mA TJ = 125°C VR = 5VDC ( 1MHz, 25°C ) CT Max. Junction Capacitance (Per Leg) 1350 pF LS Typical Series Inductance (Per Leg) 6.9 nH TJ = 25°C TJ = 125°C TJ = 25°C VR = rated VR Measured from anode lead to cathode lead 6mm ( 0.025 in.) from package Thermal-Mechanical Specifications Parameters Limits Units Conditions TJ Max.Junction Temperature Range -55 to 150 Tstg Max. Storage Temperature Range -55 to 150 °C 1.6 °C/W DC operation 0.8 °C/W DC operation RthJC Max. Thermal Resistance, Junction °C See Fig. 4 to Case (Per Leg) RthJC Max. Thermal Resistance, Junction to Case (Per Package) wt Weight (Typical) Die Size (Typical) Case Style 4.3 g 115X170 mils T0-257AA Q Pulse Width < 300µs, Duty Cycle < 2% 2 www.irf.com 16CYQ045C 100 125°C Reverse Current - I R ( mA ) 10 100 100°C 1 75°C 0.1 25°C 0.01 Instantaneous Forward Current - I F (A) 0.001 0.0001 0 10 20 30 40 50 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) 10 10000 Tj = 25°C Tj = -55°C 1 0.0 0.2 0.4 0.6 0.8 1.0 Forward Voltage Drop - V F (V) Junction Capacitance - CT (pF) Tj = 125°C T J = 25°C 1000 100 Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 0 10 20 30 40 50 Reverse Voltage -VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) www.irf.com 3 16CYQ045C Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 P DM 0.05 t1 0.02 0.01 t2 SINGLE PULSE (THERMAL RESPONSE) 0.01 0.00001 0.0001 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) 180 16CYQ045C Allowable Case Temprature - (°C) 160 R thJC = 0.8°C/W 140 DC 120 100 80 60 40 20 0 0 10 20 30 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 07/01 4 www.irf.com