PMEG2005AEL 0.5 A ultra low VF MEGA Schottky barrier rectifier in leadless ultra small SOD882 package Rev. 02 — 27 April 2004 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier diode with an integrated guard ring for stress protection encapsulated in a SOD882 leadless ultra small plastic package. 1.2 Features ■ ■ ■ ■ ■ Forward current: 0.5 A Reverse voltage: 20 V Ultra low forward voltage Leadless ultra small plastic package Power dissipation comparable to SOT23. 1.3 Applications ■ ■ ■ ■ ■ ■ Ultra high-speed switching Voltage clamping Protection circuits Low voltage rectification High efficiency DC-to-DC conversion Low power consumption applications. 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter Value Unit IF forward current 0.5 A VR reverse voltage 20 V PMEG2005AEL Philips Semiconductors 0.5 A ultra low VF MEGA Schottky rectifier 2. Pinning information Table 2: Discrete pinning Pin Description 1 cathode 2 anode Simplified outline Symbol [1] 1 1 2 2 sym001 Bottom view Top view 001aaa332 [1] The marking bar indicates the cathode. 3. Ordering information Table 3: Ordering information Type number PMEG2005AEL Package Name Description Version - leadless ultra small plastic package; 2 terminals; body 1.0 × 0.6 × 0.5 mm SOD882 4. Marking Table 4: Marking Type number Marking code PMEG2005AEL F2 5. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Max Unit - 20 V VR continuous reverse voltage IF continuous forward current - 0.5 A IFRM repetitive peak forward current tp ≤ 1 ms; δ ≤ 0.25 - 2.5 A IFSM non-repetitive peak forward current t = 8 ms square wave - 3 A Tj junction temperature [1] - 150 °C Tamb operating ambient temperature [1] −65 +150 °C Tstg storage temperature −65 +150 °C 9397 750 13201 Product data sheet Min © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 27 April 2004 2 of 8 PMEG2005AEL Philips Semiconductors 0.5 A ultra low VF MEGA Schottky rectifier [1] For Schottky barrier diodes thermal run-away has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating will be available on request. 6. Thermal characteristics Table 6: Thermal characteristics Symbol Parameter Conditions Rth(j-a) thermal resistance from junction to ambient in free air [1] [2] Value Unit 500 K/W [1] Refer to SOD882 standard mounting conditions (footprint), FR4 with 60 µm copper strip line. [2] For Schottky barrier diodes thermal run-away has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating will be available on request. 7. Characteristics Table 7: Characteristics Tamb = 25 °C unless otherwise specified Symbol Parameter Conditions VF continuous forward voltage see Figure 1; IR Cd [1] Typ Max Unit IF = 0.1 mA 25 60 mV IF = 1 mA 75 110 mV IF = 10 mA 135 190 mV IF = 100 mA 220 290 mV IF = 500 mA 375 440 mV VR = 10 V 210 600 µA VR = 20 V 370 1500 µA 19 25 pF continuous reverse current see Figure 2; diode capacitance VR = 1 V; f = 1 MHz; see Figure 3 Pulse test: tp ≤ 300 µs; δ ≤ 0.02. 9397 750 13201 Product data sheet [1] © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 27 April 2004 3 of 8 PMEG2005AEL Philips Semiconductors 0.5 A ultra low VF MEGA Schottky rectifier 001aaa342 103 001aaa343 103 IR (mA) IF (mA) (1) 102 102 (2) (1) (2) (3) (4) 10 (3) 10 1 (4) 1 10−1 10−2 10−1 0 0.1 0.2 0.3 0 0.4 5 VF (V) 10 15 20 VR (V) (1) Tj = 150 °C. (1) Tj = 150 °C. (2) Tj = 125 °C. (2) Tj = 125 °C. (3) Tj = 85 °C. (3) Tj = 85 °C. (4) Tj = 25 °C. (4) Tj = 25 °C. Fig 1. Forward current as a function of forward voltage; typical values. Fig 2. Reverse current as a function of reverse voltage; typical values. 001aaa344 40 Cd (pF) 30 20 10 0 0 5 10 15 20 VR (V) Tamb = 25 °C; f = 1 MHz. Fig 3. Diode capacitance as a function of reverse voltage; typical values. 9397 750 13201 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 27 April 2004 4 of 8 PMEG2005AEL Philips Semiconductors 0.5 A ultra low VF MEGA Schottky rectifier 8. Package outline Leadless ultra small plastic package; 2 terminals; body 1.0 x 0.6 x 0.5 mm L SOD882 L 1 2 b e1 A A1 E D (2) 0 0.5 1 mm scale DIMENSIONS (mm are the original dimensions) UNIT A (1) A1 max. b D E e1 L mm 0.50 0.46 0.03 0.55 0.47 0.62 0.55 1.02 0.95 0.65 0.30 0.22 Notes 1. Including plating thickness 2. The marking bar indicates the cathode OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 03-04-16 03-04-17 SOD882 Fig 4. Package outline. 9397 750 13201 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 27 April 2004 5 of 8 PMEG2005AEL Philips Semiconductors 0.5 A ultra low VF MEGA Schottky rectifier 9. Revision history Table 8: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes PMEG2005AEL_2 20040427 Product data - 9397 750 13201 PMEG2005AEL_1 - 9397 750 12465 - Modifications: PMEG2005AEL_1 • General description changed. 20040419 Product data 9397 750 13201 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 27 April 2004 6 of 8 PMEG2005AEL Philips Semiconductors 0.5 A ultra low VF MEGA Schottky rectifier 10. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions 12. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13201 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 27 April 2004 7 of 8 PMEG2005AEL Philips Semiconductors 0.5 A ultra low VF MEGA Schottky rectifier 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 2 3 3 5 6 7 7 7 7 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 27 April 2004 Document order number: 9397 750 13201 Published in The Netherlands