PRESSURE TRANSDUCERS PW-PAH High temperature Pressure Transducer 2~50MPa φ16 PW-2MPAH~ -20MPAH R1/8 Input/Output cable 7.5 PW-50MPAH 48.5 G3/8 Protection ratings: IP65 equivalent PW-2MPAH 2MPa Input/Output cable 14 48.5 17 ■ SPECIFICATIONS TYPE Capacity Rated Output Non-linearity Hysteresis Repeatability Temperature effect on zero Temperature effect on span Compensated temperature range Allowable temperature range Over load Input/Output resistance Recommended exciting voltage Allowable exciting voltage Mounting screws Pressure media Weight φ19 The PW-PAH pressure transducer is designed to measure pressure in a high temperature with compact size. As the model equipped with a fluoroplastic Input/Output cable, a high temperature pressure measurement is available up to 170°C. These models line up five ranges of 2, 5, 10, 20 and 50MPa. 13 PW-5MPAH PW-10MPAH PW-20MPAH 5MPa 10MPa 20MPa 2mV/V(4000× 10-6 strain) ±25% 0.3%RO 0.2%RO 0.2%RO 0.008%RO/°C 0.01%/°C -40 ~ +150°C -40 ~ +170°C 150% 350Ω Less than 5V 10V R1/8 (Male) SUS630 47g PW-50MPAH 50MPa G3/8 (Male) Supplied cable : CT4-4F5/SNP-STB (φ4mm 0.08mm2 4-core shielded fluoroplastic resin cable 5m) 68g PWA Built-in amplifier, High temperature Pressure Transducer 2~50MPa φ16 R 1/8 7.5 G 3/8 17 ■ SPECIFICATIONS TYPE Capacity Rated Output Non-linearity Hysteresis Temperature effect on zero Temperature effect on span Compensated temperature range Allowable temperature range SN ratio Load resistance Power requirement Mounting screws Materials of pressure media Weight PWA2MPAHV 2MPa PWAPWAPWAPWA5MPAHV 10MPAHV 20MPAHV 50MPAHV 5MPa 10MPa 20MPa 50MPa Voltage output 0~5V 0.3%RO 0.3%RO 0.01%RO/°C 0.03%/°C -20 ~ +150°C (Pressure media) -20 ~ +120°C (Operating) -20 ~ +120°C More than 50dB More than 5kΩ DC 12(10.5~15)V 30mA MAX R1/8 external G3/8 internal SUS630 110g 127g Supplied cable : CT4-4F5/SNP-STB (φ4mm 0.08mm2 4-core shielded fluoroplastic cable 5m) 52 PWA2MPAHA 2MPa φ20 PWA-50MPAHV / -50MPAHA Protection ratings: IP65 equivalent Input/Output cable 110 φ19 The PWA pressure transudcer is a strain gauge pressure transducer with built-in amplifier. As the model enquipped with a fluoroplastic input/output cable, a high temperature pressure measurement is available up to 120°C. This model consists of two typs of outputs for voltage and current and five ranges of 2, 5, 10, 20 and 50MPa. 13 φ20 PWA-2~-20MPAHV / -2~-20MPAHA 14 Input/Output cable 110 PWAPWAPWAPWA5MPAHA 10MPAHA 20MPAHA 50MPAHA 5MPa 10MPa 20MPa 50MPa Current output 4~20mA 0.3%RO 0.3%RO 0.01%RO/°C 0.03%/°C -20 ~ +150°C (Pressure media) -20 ~ +120°C (Operating) -20 ~ +120°C More than 50dB More than 500Ω DC 24(21~30)V 30mA MAX R1/8 external G3/8 internal SUS630 110g 127g