32 320-001 Extender Backshell Standard Profile - Rotatable Coupling 320 F S 001 M 16-3 CONNECTOR DESIGNATORS Product Series A-D-F-H-L-S Length - Straight only (1/2 inch increments: e.g. 3 = 1.5 inches) Minimum order length 1.0 inches Connector Designator ROTATABLE COUPLING Angle and Profile L = 90° K = 45° S = Straight Shell Size (Table I) Finish (Table II) Basic Part No. Length ±.060 (1.52) A Thread Class 2B (Table I) E (Table III) F (Table III) C Typ. (Table I) A Thread - Class 2A (Table I) G (Table III) TABLE II : STANDARD FINISHES H (Table III) GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel Now Available with the “NESTOR” Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Back Cover for Complete Finish Information and Additional Finish Options TABLE III: DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 19 18 21 20 23 22 24 25 © 2005 Glenair, Inc. G Max .940 (23.9) 1.010 (25.7) 1.070 (27.2) 1.130 (28.7) 1.190 (30.2) 1.240 (31.5) 1.310 (33.3) 1.360 (34.5) 1.540 (39.1) F Max .890 (22.6) .920 (23.4) .942 (23.9) .970 (24.6) .990 (25.1) 1.010 (25.7) 1.040 (26.4) 1.060 (26.9) 1.090 (27.7) E Max .830 (21.1) .860 (21.8) .882 (22.4) .900 (22.9) .930 (23.6) .950 (24.1) .980 (24.9) 1.000 (25.4) 1.030 (26.2) CAGE Code 06324 H Max 1.000 (25.4) 1.070 (27.2) 1.130 (28.7) 1.190 (30.2) 1.250 (31.8) 1.300 (33.0) 1.370 (34.8) 1.420 (36.1) 1.490 (37.8) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Metric dimensions (mm) are indicated in parentheses. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 32 - Page 2